Embedded Power for Business-Critical Continuity Rev. 08.17.07 LPS150 Series 1 of 3 LPS150 Series 150 Watts Total Power: 100 - 150 Watts Input Voltage: 85-132 /170-264 Vac 220 - 300 Vdc # of Outputs: Single Electrical Specifications Input 85 - 132 Vac or 170 - 264 Vac automatically selected; Input ra nge Special Features 220 - 300 Vdc • Auto ranging input Frequency 47 - 63 Hz • Remote sense Inrush current 38 A max, cold start @ 25 °C • Remote inhibit Efficiency 75% typical at full load • Power fail EMI filter FCC Class B conducted • Single wire current sharing CISPR 22 Class B conducted • Built-in EMI filter EN55022 Class B conducted • Low output ripple VDE 0878 PT3 Class B conducted • Adjustable output • 135 khz switching frequency 0.5 mA @ 50/60 Hz, 264 VAC input Safety ground • Overvoltage protection leakage current • Overload protection Output • Optional cover (-C suffix) Maximum power 110 W convection (75 W with cover) 150 W with 30 CFM forced air (130 W with cover) Adjustment range ± 5% minimum on the main outputs Hold-up time 20 ms @ 110 W load, 115/230 Vac nominal lline Overload protection Short circuit protection. Case overload protected @ 110% to 145% above peak rating Overvoltage protection 5 V output: 5.7 to 6.7 VDC. Other outputs 10% to 25% above nominal Safety output VDE 0805/EN60950 (IEC950) 11774-3336-1260 Logic Control (LC#88585) Power failure TTL Logic signal goes high 50 - 150 msec after 5 V output. It goes low at UL UL1950 EI32002 least 3 ms before loss of regulation CSA CSA 22.2-234 Level 3 Remote inhibit Requires an external TTL high signal to inhibit outputs LR53982 NEMKO EN 60950/EMKO-TUE Remote sense Compensates for 0.5 V lead drop minimum, will operate without remote P95102999 (74-sec) 203 sense connected. Reverse connection protected BABT EN60950/BS7002 607019 CB Certificate and report 2062 CE Mark (LVD) Embedded Power for Business-Critical Continuity Rev. 08.17.07 LPS150 Series 2 of 3 Environmental Specifications Operating temperature: 0° to 50 °C ambient; derate each output at 2.5% per degree from 50° to 70 °C Storage temperature: -40 °C to +85 °C Temperature coefficient: ± 0.4% per °C Electromagnetic Designed to meet IEC 801, -2, -3, -4, -5, -6, Level 3 susceptibility: Humidity: Operating; non-condensing 5% to 95% Vibration: Three orthogonal axes, sweep at 1 oct/min, 5 min. dwell at four major resonances 0.75G peak 5Hz to 500Hz, operational MTBF demonstrated: > 550,000 hours at full load and 25 °C ambient conditions Ordering Information Maximum Load Maximum Load Model Output Minimum 1 2 3 with Convection with 30CFM Peak Load Regulation Ripple P/P (PARD) Number Voltage Load Cooling forced Air LPS152 5 V 0 A 22 A 30 A 35 A ± 2% 50 mV LPS153 12 - (15) V 0 A 9.1 A 12.5 A 14.5 A ± 2% 150 mV LPS155 24 - (28) V 0 A 4.5 A 6.2 A 7.2 A ± 2% 280 mV, max. 1. Peak current lasting < 30 seconds with a maximum 10% duty cycle. 2. At 25 °C including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 3. Peak-to-peak with 20 MHz bandwidth and 10 µF in parallel with a 0.1 µF capacitor at rated line voltage and load ranges. Mating Connectors Pin Assignments AC input Molex 09-50-8051 (USA) Connector LPS152 LPS153 LPS155 (SK4): Molex 09-91-0500 (UK) SK1 PIN 1 INHIBIT -ve INHIBIT -ve INHIBIT -ve PINS: 08-58-0111 PIN 2 INHIBIT +ve INHIBIT +ve INHIBIT +ve Power fail Molex 09-50-8031 (USA) PIN 3 VCC VCC VCC (SK2): Molex 09-91-0300 (UK) PIN 4 No Connection No Connection No Connection PINS: 08-58-0111 Remote Molex 51110-0851 (USA) PIN 5 COMMON COMMON COMMON sense/ PINS: 50394-8100 PIN 6 -SENSE -SENSE -SENSE Remote PIN 7 +SENSE +SENSE +SENSE inhibit PIN 8 C SHARE C SHARE C SHARE (SK1): Astec Connector Kit #70-841-009, includes all of the above SK2 PIN 5 COMMON COMMON COMMON PIN 6 PIN REMOVED PIN REMOVED PIN REMOVED 1. Specifications subject to change without notice. PIN 7 POK POK POK 2. All dimensions in inches (mm), tolerance is ±0.02” (±0.5mm) SK3 TB-1 COMMON COMMON COMMON 3. Specifications are for convection rating at factory settings TB-2 +5 V +5 V +5 V unless otherwise stated SK4 PIN 1 GROUND GROUND GROUND 4. Remote inhibit requires an external 5V @ 10mA to activate. PIN 3 LINE LINE LINE 5. Mounting (6-32) maximum insertion depth is 0.12”. PIN 5 NEUTRAL NEUTRAL NEUTRAL 6. Warranty: 2 year 7. Weight: 1.75 lbs/0.80 kg Embedded Power for Business-Critical Continuity Rev. 08.17.07 LPS150 Series Mechanical Drawing 3 of 3 Americas SK1 5810 Van Allen Way 8765 #6-32 (8 places) Carlsbad, CA 92008 SK3 SK2 1234 USA .5625 Telephone: +1 760 930 4600 21 7 6 5 Facsimile: +1 760 930 0698 Europe (UK) Do Not Waterfront Business Park Adjust Merry Hill, Dudley West Midlands, DY5 1LX Output United Kingdom Adjust Telephone: +44 (0) 1384 842 211 Facsimile: +44 (0) 1384 843 355 Asia (HK) 7.4 14/F, Lu Plaza (188.0) 2 Wing Yip Street Kwun Tong, Kowloon 8.5 Hong Kong (216.0) Telephone: +852 2176 3333 Facsimile: +852 2176 3888 For global contact, visit: www.Emerson.com/EmbeddedPower techsupport.embeddedpower @emerson.com While every precaution has been taken to ensure 5 3 1 accuracy and completeness in this literature, Emerson .75 (19.0) Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this SK4 1.5 information or for any errors or omissions. 4.25 (38.1) (108.0) Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity 2.5 .875 (63.5) (22.25) DC Power Embedded Computing Embedded Power Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services Surge Protection EmersonNetworkPower.com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2010 Emerson Electric Co.