Embedded Power for Business-Critical Continuity SXX06E Rev. 08.01.06 Page 1 of 2 Rev. 09.03.08 LDO10C 1 of 4 LDO10C Series 50 Watts Total Power: 50 Watts Input Voltage: 3-13.8 Vdc Electrical Specifications No. of Outputs: Single Output Output voltage See Note 5 0.59-5.1 V Output setpoint accuracy 0.1% trim resistors ±1.0% Line regulation Low line to high line ±0.2% Load regulation Full load to min. load ±0.5% Min./max. load 0 A/10 A Special Features Overshoot At turn-on 0.5% max. Undershoot At turn-off 100 mV max. • 10 A output current rating Ripple and noise See Note 1 20 mV • Input voltage range: 5 Hz to 20 MHz Vin=5 V, Vout=2.5 V 3-13.8 Vdc • Adjustable out voltage: Transient response See Notes 1, 2 130 mV max. deviation 0.59-5.1 V 15 μs recovery to within regulation band • Factory set with power good option Input • Excellent transient response Input voltage range 3-13.8 Vdc • Power enable • Minimum airflow Input current Minimum load 50 mA Remote OFF 5 mA • Small package • Termination voltage Input current (max.) See Note 3 10 A @ lo max. capability Start-up time Power up 3 ms • RoHS compliant Remote ON/OFF 2 ms General Efficiency Vin=5 V, Vo=2.5 V, lo=10 A 91% Switching frequency Fixed 620 kHz Material flammability UL94V-0 Weight 1.899 g (0.067 oz.) MTBF 12 V @ 40 °C, 100% load 8,220,210 hours Bellcore 332 Coplanarity Surface mount models 150μm Safety UL, cUL 60950-1 TÜV Product Service (EN60950) Certificate No. TBD CB Report and Certificate to IEC60950 Embedded Power for Business-Critical Continuity Rev. 09.03.08 LDO10C Environmental Specifications 2 of 4 Thermal performance Operating ambient -40 °C to +85 °C -40 °C to +125 °C See Note 5 Non-operating ambient Protection Short-circuit Hiccup, non-latching Overvoltage protection Hiccup, non-latching Recommended System Capacitance Input See Note 6 0 μF Output See Note 7 0 μF Ordering Information Output Output Output Power Input Output Current Current EfŢ ciency Regulation Model (3,5) (Max.) Voltage Voltage (Min.) (Max.) (Typical) Line Load Number 50W 3-13.8 Vdc 0.59-5.1 V 0 A 10 A 94% ±0.2% ±0.5% LDO10C-005W05-VJ 50W 3-13.8 Vdc 0.59-5.1 V 0 A 10 A 94% ±0.2% ±0.5% LDO10C-005W05-HJ 50W 3-13.8 Vdc 0.59-5.1 V 0 A 10 A 94% ±0.2% ±0.5% LDO10C-005W05-SJ Part Number System with Options Product Family Rated Output Performance Input Voltage Number of Pins Output Voltage Mounting Option Custom Option RoHS Compliance Current Type of Output LDO 10 C 00 5W 05 V X J Product Family Rated Output Performance Input Voltage Type of Output Output Voltage Mounting Option Custom Option RoHS Compliance LDO = LDO Series Current C = Cost 00 = 3-13.8 V 5W = 5 Pins and 05 = 0.59-5.1 V V = Vertical J = Pb free (RoHS 10 = 10 Amp Optimized 01 = 4.5-13.8V Wide Output H = Horizontal 6/6 compliant) S = Horizontal SMT VS = Vertical SMT Output Voltage Adjustment of the LDO10C Series The ultra-wide output voltage trim range offers major advantages to users who select the LDO10C series. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.59-5.1 Vdc. When the LDO10C converter leaves the factory, the output has been adjusted to the default voltage of 0.59 V. Notes: 1. Measured as per recommended system capacitance. See Technical Reference Note. 2. di/dt = 10 A/μs, Vin = Nom, Tc = 25 °C, load change = 0.50 lo to full lo and full lo to 0.50. 3. External input fusing is recommended. 4. Additional part numbers may be available with different output voltages. 5. Airflow dependent, 100 LFM minimum required. 6. No capacitors needed for ripple current stability. 7. No capacitors needed for stability. 8. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please consult your local sales representative for details. 9. NOTICE: Some models do not support all options. Please contact your local Emerson Network Power representative or use the on-line model number search tool at http:// www.powerconversion.com/powergroup/products.htm to find a suitable alternative. Embedded Power for Business-Critical Continuity Rev. 09.03.08 LDO10C Mechanical Drawings 3 of 4 Vertical Mount Dimensions in inches (mm). Tolerances es (unless otherwise speciŢ ed) 2 Places ±0.030 (±0.76) 3 Places ±0.010 (±0.25) 0.410 (10.41) 0.45 (11.35) 0.055 (1.40) REF 0.062 (1.57) REF 0.650 (16.51) PIN 5 PIN 1 0.16 ± 0.010 (4 ± 0.25) 0.071 (1.80) 0.050 (1.27) TYP 4X 0.067 TYP (1.70) 0.025 (0.64) ± .001 SQ PINS TYP Horizontal Mount 0.52 (13.13) 0.410 (10.41) 0.062 (1.57) REF 0.050 (1.27) 0.125 (3.05) TYP PIN 6 0.650 (16.51) 0.580 (14.73) PIN 5 Pin 1 0.055 (1.40) REF 0.035 (0.89) 0.025 (0.64)± .001 SQ PIN TYP 0.071 (1.80) 0.125 (3.18) TYP 4X 0.067 (1.70) TYP Embedded Power for Business-Critical Continuity SXX06E Rev. 08.01.06 Page 1 of 2 Rev. 09.03.08 LDO10C Americas 4 of 4 Mechanical Drawings (Cont'd) 5810 Van Allen Way Carlsbad, CA 92008 USA Surface Mount Telephone: +1 760 930 4600 0.52 (13.13) Facsimile: +1 760 930 0698 0.410 (10.41) 0.062 (1.57) REF Europe (UK) 7 Waterfront Business Park 6 Merry Hill, Dudley West Midlands, DY5 1LX 0.650 (16.51) United Kingdom LDO10C- Telephone: +44 (0) 1384 842 211 005W05- Facsimile: +44 (0) 1384 843 355 0.040 (1.02) Asia (HK) REF 16th - 17th Floors, Lu Plaza 2 Wing Yip Street, Kwun Tong 1 5 Kowloon, Hong Kong 0.035 (0.89) 0.055 (1.40) REF Telephone: +852 2176 3333 0.025 (0.64) REF REF Facsimile: +852 2176 3888 0.125 (3.18) TYP For global contact, visit: www.powerconversion.com For technical support, visit: http://www.powerconversion. com/support/product/ technical-support.php While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity Pin Assignments DC Power Single Output Embedded Power 1. Enable 2. Vin Inbound Power 3. Common/RTN Integrated Cabinet Solutions 4. Vout Outside Plant 5. PG/Trim Precision Cooling 6. Mech Pin (Horz/SMT only) Site Monitoring and Services EmersonNetworkPower. com *This is a Preliminary Datasheet. Emerson Network Emerson Network Power and the Emerson Power reserves the right to make changes to the Network Power logo are trademarks and information contained herein without notice and service marks of Emerson Electric Co. ©2008 Emerson Electric Co. assumes no liability as a result of its use or application. 0 (0.00) 0.050 (1.27) 0.071 (1.80) 0.138 (3.51) 0.205 (5.21) 0.272 (6.91) 0.339 (8.61) 0.360 (9.14)