Embedded Power for Business-Critical Continuity SXX06E Rev. 08.01.06 Page 1 of 2 Rev. 01.29.09 LDO03C 1 of 4 LDO03C Series 15 Watts Total Power: 15 Watts Input Voltage: 3-13.8 Vdc Electrical Specifications No. of Outputs: Single Output Output voltage See Note 5 0.59-5.1 V Output setpoint accuracy 0.1% trim resistors ±1.0% Line regulation Low line to high line ±0.5% Load regulation Full load to min. load ±0.5% Min./max. load 0 A/3 A Overshoot At turn-on 0.5% max. Special Features Undershoot At turn-off 100 mV max. • 3 A output current rating Ripple and noise See Note 1 25 mV • Input voltage range: 5 Hz to 20 MHz Vin=5 V, Vout=2.5 V 3-13.8 Vdc • Adjustable out voltage: Transient response See Notes 1, 2 235 mV max. deviation 20 μs recovery to within 0.59-5.1 V regulation band • Optional factory setting with power good Input • Excellent transient response Input voltage range 3-13.8 Vdc • Power enable Input current Minimum load 50 mA • Minimum airflow Remote OFF 5 mA • Small package • Termination voltage Input current (max.) See Note 3 3 A @ lo max. capability Start-up time Power up 3 ms • RoHS compliant Remote ON/OFF 2 ms General Efficiency (high input) Vin=5 V, Vo=2.5 V, lo=3 A 90% Switching frequency Fixed 1.5 MHz Material flammability UL94V-0 Weight 1.7 g (0.06 oz.) MTBF 12 V @ 40 °C, 100% load 10,000,000 hours Bellcore 332 Coplanarity Surface mount models 150μm Safety UL, cUL 60950-1 TÜV Product Service (EN60950) Certificate No. TBD CB Report and Certificate to IEC60950 Embedded Power for Business-Critical Continuity Rev.01.29.09 LDO03C Environmental Specifications 2 of 4 Thermal performance Operating ambient -40 °C to +85 °C -40 °C to +125 °C See Note 5 Non-operating ambient Protection Short-circuit Hiccup, non-latching Overvoltage protection Hiccup, non-latching Recommended System Capacitance Input See Note 6 0 μF Output See Note 7 0 μF Ordering Information Output Output Output Power Input Output Current Current EfŢ ciency Regulation Model (3,5) (Max.) Voltage Voltage (Min.) (Max.) (Typical) Line Load Number 15W 3-13.8 Vdc 0.59-5.1 V 0 A 3 A 90% ±0.2% ±0.5% LDO03C-005W05-VJ 15W 3-13.8 Vdc 0.59-5.1 V 0 A 3 A 90% ±0.2% ±0.5% LDO03C-005W05-HJ 15W 3-13.8 Vdc 0.59-5.1 V 0 A 3 A 90% ±0.2% ±0.5% LDO03C-005W05-SJ Part Number System with Options Product Family Rated Output Performance Input Voltage Number of Pins Output Voltage Mounting Option Custom Option RoHS Compliance Current Type of Output LDO 03 C - 00 5W 05 - V X J Product Family Rated Output Performance Input Voltage Type of Output Output Voltage Mounting Option Custom Option RoHS Compliance LDO = LDO Series Current C = Cost 00 = 3-13.8 V 5W = 5 Pins and 05 = 0.59-5.1 V V = Vertical J = Pb free (RoHS 03 = 3 Amp Optimized Wide Output H = Horizontal 6/6 compliant) S = Horizontal SMT VS = Vertical SMT Output Voltage Adjustment of the LDO03C Series The ultra-wide output voltage trim range offers major advantages to users who select the LDO03C series. It is no longer necessary to purchase a variety of modules in order to cover different output voltages. The output voltage can be trimmed in a range of 0.59-5.1 Vdc. When the LDO03C converter leaves the factory, the output has been adjusted to the default voltage of 0.59 V. Notes: 1. Measured as per recommended system capacitance. See Technical Reference Note. 2. di/dt = 10 A/μs, Vin = Nom, Tc = 25 °C, load change = 0.50 lo to full lo and full lo to 0.50. 3. External input fusing is recommended. 4. Additional part numbers may be available with different output voltages. 5. Airflow dependent, 100 LFM minimum required. 6. No capacitors needed for ripple current stability. 7. No capacitors needed for stability. 8. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please consult your local sales representative for details. 9. NOTICE: Some models do not support all options. Please contact your local Emerson Network Power representative or use the on-line model number search tool at http:// www.powerconversion.com/powergroup/products.htm to find a suitable alternative. Embedded Power for Business-Critical Continuity Rev. 01.29.09 LDO03C Mechanical Drawings 3 of 4 Vertical Mount Dimensions in inches (mm). Tolerances es (unless otherwise speciŢ ed) 2 Places ±0.030 (±0.76) 3 Places ±0.010 (±0.25) .212 .370 LDO03C-005W05-VJ .610 D/C: ZYWWRR Pin 1 .16 .025 SQ. PIN .051 .067 TYP .050 Horizontal Mount .292 .370 .131 LDO03C-005W05-HJ .610 D/C: ZYWWRR .540 .025 SQ PIN Pin 1 .051 .125 .067 .120 TYP Embedded Power for Business-Critical Continuity SXX06E Rev. 08.01.06 Page 1 of 2 Rev. 01.29.09 LDO03C Americas 4 of 4 Mechanical Drawings (Cont'd) 5810 Van Allen Way Carlsbad, CA 92008 USA Horizontal Surface Mount Telephone: +1 760 930 4600 .025 Facsimile: +1 760 930 0698 TYP Europe (UK) Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX United Kingdom .315 MAX Telephone: +44 (0) 1384 842 211 .370 Facsimile: +44 (0) 1384 843 355 .131 Asia (HK) 16th - 17th Floors, Lu Plaza 2 Wing Yip Street, Kwun Tong Kowloon, Hong Kong LDO03C-005W05-SJ Telephone: +852 2176 3333 .610 .540 D/C: ZYWWRR Facsimile: +852 2176 3888 For global contact, visit: www.powerconversion.com .040 TYP For technical support, visit: Pin 1 .051 http://www.powerconversion. NOTE: 1. 9300161-0000 PACKAGING AND MATERIAL HANDLING PROCEDURE. 2. COSMETIC AND WORKMANSHIP PER 9300152-0000. .067 com/support/product/techni- 3. LABEL SHOWN FOR REFERENCE PLACEMENT ONLY. TYP cal-support.php While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this Pin Assignments information or for any errors or omissions. Printed in U.S.A. Single Output Issue SF3 1. Enable Emerson Network Power. 2. Vin The global leader in enabling 3. Common/RTN business-critical continuity. 4. Vout AC Power 5. PG/Trim 6. Mech Pin (Horz/SMT only) Connectivity DC Power Embedded Power Inbound Power Integrated Cabinet Solutions Outside Plant Precision Cooling Site Monitoring and Services EmersonNetworkPower. com *This is a Preliminary Datasheet. Emerson Network Emerson Network Power and the Emerson Power reserves the right to make changes to the Network Power logo are trademarks and information contained herein without notice and service marks of Emerson Electric Co. ©2008 Emerson Electric Co. assumes no liability as a result of its use or application.