ASTEC DS550DC-3-004
Specifications
Input Voltage
36 to 75V
Mounting Style
Snap-In
Number of Outputs
2
Operating Temperature
-10 to 40C
Operating Temperature Max Deg. C
50C
Operating Temperature Min Deg. C
-10C
Pin Count
30
Screening Level
Commercial
Features
- 10.3 W/ cu-in
- 1U x 2U Form Factor
- Active Current Sharing
- Full Safety Approval
- Hot Plug Operation
- I2C communication Bus
- N+1 Redundant
- No Min Load Required
- Smart Fan Speed Control
- Status LED's
Datasheet
Extracted Text
Embedded Power for Business-Critical Continuity Rev. 03.15.11_79 DS450DC/DS550DC 1 of 4 DC Input DS450DC-3/ DS550DC-3 450 - 550 Watts Distributed Power System Distributed Power Bulk Front-End Total Output Power: 450 - 550 Watts +12 Vdc main Output +3.3 Vdc Stand-by Output DC Input 36 - 75 Vdc Connector input shown Electrical Specifications Input Special Features Input ra nge: 36 - 75 Vdc • 1U X 2U Form Factor Frequency: DC input 3 • 10.3 W / in (DS550) Inrush current: 21 A maximum 3 8.4 W / in (DS450) Efficiency: EVT: 87% @ 72 Vdc; 87.4% @ 75 Vdc • +12 Vdc Output Conducted EMI: FCC Subpart J EN55022 Class A • +3.3 Vdc Stand-By • No Minimum Load Required Radiated EMI: FCC Subpart J EN55022 Class A • Hot Plug Operation Power factor: N/A • N + 1 Redundant Leakage current: N/A No touch current required. • Internal OR’ing Fets • Active Current Sharing Hold up time: 1 ms minimum • Built-in Cooling Fans Output (40 mm x 28 mm) 2 Main DC voltage: +12 V • IC Communication Interface Bus • EERPOM for FRU Data Stand-By: +3.3 Vsb • Amber LED Status, Fan_Fail Adjustment range: Factory Set, no pot adjustments • Green LED Status, Power Good / Regulation: DC_OK Status (VIN_GOOD) +12 Vdc; +5%/-5% +3.3 Vsb; +5%/-5% • Internal Fan Speed Control • Fan Fail Tach Output Signal Over current: See Table 1 next page • One Year Warranty Over voltage: +12 Vdc; 13.5 - 15 Vdc +3.3 Vsb; 3.76 - 4.30 Vdc Under voltage: +12 Vdc; 10.5 V - 11.0 V +3.3 Vsb; 2.77 - 3.00 Vdc Turn-on delay: < 3 seconds, EVT: 2 seconds +12 V Output Rise Time: 3 - 300 mS Safety • UL/cUL 60950 (UL Recognized) • NEMKO+ CB Report EN60950 • EN60950 • CE Mark • China CCC Embedded Power for Business-Critical Continuity Rev. 03.15.11_79 DS450DC/DS550DC Logic Control 2 of 4 PS_ON/L: The power supply output will be enabled when this signal is pulled low (< 0.8 V). (Power supply enable) HIGH = Output V1 OFF LOW = Output V1 ON VIN_GOOD/H (Input OK): Active High signal asserted when the input voltage rises above the min input voltage specified. This signal is internally pulled up through 4.7 K ohms to the 3.3 V housekeeping voltage. POK/H (Output OK): Active High signal asserted when the output is within regulation. This signal is internally pulled up through 1.0 K ohms to the 3.3 V housekeeping voltage. TACH_1: This open collector signal generates two pulses per each fan revolution. This signal is eternally pulled up to the housekeeping voltage. PS_KILL: This signal will cause the output to shut down when drive high (> 24 V) or left floating. The PS_KILL will cause the output to latch off and requires recycle of PS_ON or DC input to reset. 2 Digital Control: PMBus - I C compliant Environmental Specifications Operating temperature: -10 °C to 50 °C Storage temperature: -40 °C to +70 °C Altitude, operating: 10,000 ft. Electromagnetic - EN61000-3-2, -3-3 susceptibility / Input transients:- EN61000-4-2, 4.3, 4-4, -4-5, 4-11 Level - EN55024:1998 RoHS & lead-free compliant (no tantalum caps.) Humidity: 20 to 90% RH, non-condensing Shock and vibration specificatons complies with Astec Std. Specifications, Q3205 MTBF (observed): 500K Hrs at 80%, 40 °C Ordering Information Nominal Output Set Point Total Minimum Maximum Output Ripple Output Over Current Options Voltage Set Point Tolerance Regulation Current Current P/P 12.0 Vdc ± 0.2% +5 / -3% 0 A 37.0 A 120 mV 39.5 - 44.4% DS450DC-3 Standard ± 1% +5 / -4% 0 A 3.0 A 60 mV 4.9 A Avg, 7 A max 3.3 Vsb 12.0 Vdc ± 0.2% +5 / -3% 0 A 37.0 A 120 mV 39.5 - 44.4% DS450DC-3-002 Reverse Air ± 1% +5 / -4% 0 A 3.0 A 60mV 4.9 A Avg, 7 A max 3.3 Vsb 12.0 Vdc ± 0.2% +5 / -3% 0 A 45.0 A 120 mV 48.0A - 54.0A DS550DC-3 Standard 3.3 Vsb ± 1% +5 / -4% 0A 3.0 A 60 mV 4.9 A Avg, 7 A max 12.0 Vdc ± 0.2% +5 / -3% 0 A 45.0 A 120 mV 48.0A - 54.0A DS550DC-3-003 Reverse Air ± 1% +5 / -4% 0 A 3.0 A 60 mV 4.9 A Avg, 7 A max 3.3 Vsb *Over current latches off if overcurrent lasts over 1 second, otherwise it is auto recovery. *For 5 Vsb, consult marketing. Embedded Power for Business-Critical Continuity Rev. 03.15.11_79 DS450DC/DS550DC 3 of 4 Mechanical Drawing Embedded Power for Business-Critical Continuity Rev. 03.15.11_79 DS450DC/DS550DC Americas 4 of 4 5810 Van Allen Way DC Output Connector Pinout Assignment Carlsbad, CA 92008 Male connector as viewed from the rear of the supply: USA Telephone: +1 760 930 4600 D1 D2 D3 D4 D5 D6 Facsimile: +1 760 930 0698 C1 C2 C3 C4 C5 C6 PB1 PB2 PB3 PB4 PB5 PB6 B1 B2 B3 B4 B5 B6 Europe (UK) A1 A2 A3 A4 A5 A6 Waterfront Business Park Merry Hill, Dudley P1 - Power Supply Side Pin Signal Name West Midlands, DY5 1LX United Kingdom PB 1 +12 V Return Telephone: +44 (0) 1384 842 211 1. FCI Power Blade 51721 series PB 2 +12 V Return Facsimile: +44 (0) 1384 843 355 51721-10002406AA PB 3 +12 V Return PB 4 +12 V Asia (HK) 2. Molex Power Connector PB 5 +12 V 14/F, Lu Plaza SD-87667 series 2 Wing Yip Street PB 6 +12 V Kwun Tong, Kowloon 87667-7002 A1 PS_KILL Hong Kong A2 +12 V_Current Share Telephone: +852 2176 3333 Mating Connector (System Side) A3 Return Facsimile: +852 2176 3888 A4 Write Protect 1. FCI Power Blade A5 PS A0 For global contact, visit: A6 +3.3 V SB 51741-10002406CC www.Emerson.com/EmbeddedPower B1 Return Strait Pins techsupport.embeddedpower B2 12 V RTN Sense @emerson.com B3 Return 2. FCI Power Blade While every precaution has been taken to ensure B4 +3.3 V SB 51761-10002406AA accuracy and completeness in this literature, Emerson B5 SDA Network Power assumes no responsibility, and disclaims Right Angle all liability for damages resulting from use of this B6 -PS_ON/L information or for any errors or omissions. C1 Return C2 Tach_1 Emerson Network Power. C3 Return The global leader in enabling C4 +3.3 V SB business-critical continuity. C5 SCL* AC Power C6 VIN_GOOD/H D1 -Present/L Connectivity D2 +12 V_Sense DC Power D3 Return Embedded Computing D4 +3.3 V SB D5 Alert/L (S_INT) Embedded Power D6 POK/H (PWROK/H) Monitoring 2 *Supports I C standard mode (100 kHz) only Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services Surge Protection EmersonNetworkPower.com Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2011 Emerson Electric Co. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Emerson Network Power : DS450DC-3-002 DS550DC-3-003 DS450DC-3 DS550DC-3
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the DS550DC-3-004 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods