ASTEC DP4015N3M
Specifications
AC Plug included/required
Required
Commercial/Medical
Commercial
DC Output Connector
2.5 mm Barrel Plug
DC Output Cord Length
1.2 m
Efficiency
Level V
Input Voltage Range
90 VAC to 264 VAC, 127 VDC to 300 VDC
Mounting Style
Desktop
Number of Outputs
1
Output Current (Channel 1)
2.67 A
Output Power Rating
40 W
Output Voltage (Channel 1)
15 V
Features
- CE Mark EMC, LVD & ErP 2011
- Complies with EN61000-3-2
- Constant voltage
- Fully regulated output
- High efficiency
- High MTBF
- Input power
- LED power good indicator
- Less than 300 mW No-Load power consumption
- Medical and ITE safeties
- Meets Energy Star Efficiency Level V
- Overload and short circuit protection
- Universal AC input
Datasheet
Extracted Text
Embedded Power for Business-Critical Continuity Rev. 03.31.11_75 DP40 1 of 2 DP40 40 Watts Total Power: 40 Watts Input Voltage: 90 - 264 Vac 127 - 300 Vdc # of Outputs: Single Electrical Specifications Input 90 - 264 Vac (wide range) Input ra nge: Special Features 127 - 300 Vdc Frequency: 47 - 63 Hz • Medical and ITE safeties Inrush current: < 50A @ 230 Vac, cold start @ 25 °C • Universal AC input Input current: < 0.5 A rms @ 115 Vac; < 0.25 A @ 230 Vac • Fully regulated output Efficiency: 84% @ full load typical, @115 Vac • Overload and short circuit EMI/RFI: FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B protection 300 µA @ 50/60 Hz, 264 Vac input for 3 pin model Safety ground • Constant voltage leakage current: 100 µA @ 50/60 Hz, 264 Vac input for 2 pin model • High efficiency Output • High MTBF Maximum Power (Po): 40 W • IEC320 AC input receptacle 10 ms. typical at full load @ 115 Vac Hold-up time: 3 pin (type C14) Class I Overvoltage protection: 20% - 45% above nominal output maximum 2 pin (type C8) Class II Latching type, recycle AC to reset. • Built in EMI filter Output short circuit protection auto recover Overload protection: (CISPR 22 Class B) Overload protected @ 110 - 160% above peak rating • LED power good indicator Cable/connector: 1.2 m DC cable with 2.5 mm I.D, 5.5 mm O.D center plug • Input power < 49 watts DC plug center +v • Complies with EN61000-3-2 DC plug outer -v • Meets Energy Star Efficiency Level V Environmental Specifications • CE Mark EMC, LVD & ErP 2011 Operating temperature: 0 ° to +40 °C ambient. Derate each output as 2.5% per degree from • Less than 300 mW No-Load 40 °C to 60 °C. -20 °C start up power consumption Storage temperature: -40 °C to +85 °C Electromagnetic Designed to meet EN61000-4, -2, -3, -4, -5, -6, -8, -11, Level 3 susceptibility: Humidity: Operating; non-condensing 10% to 90% RH Safety Three orthogonal axes, 3 sweeps per axe at 1 oct/min. 2G peak 8Hz Vibration: • UL 60950-1, 60601-1 to 500Hz, operational • cUL 60950-1, 60601-1 MTBF demonstrated: > 550,000 hours at full load and 25 °C ambient conditions • TUV 60950-1, 60601-1 • CE EMC, LVD & ErP 2011 • CB Certificate and report • CCC China Approval Embedded Power for Business-Critical Continuity Rev. 03.31.11_75 DP40 Americas Ordering Information 2 of 2 5810 Van Allen Way Ripple 1 2 Model Number Output Voltage Maximum Load Peak Load Regulation Carlsbad, CA 92008 3 P/P (PARD) USA DP4009N2M 9 V 4.44 A 5.4 A ± 8% 90 mV Telephone: +1 760 930 4600 DP4009N3M 9 V 4.44 A 5.4 A ± 8% 90 mV Facsimile: +1 760 930 0698 DP4012N2M 12 V 3.33 A 4.4 A ± 5% 120 mV DP4012N3M 12 V 3.33 A 4.4 A ± 5% 120 mV Europe (UK) DP4015N2M 15 V 2.67 A 3.5 A ± 5% 150 mV Waterfront Business Park DP4015N3M 15 V 2.67 A 3.5 A ± 5% 150 mV Merry Hill, Dudley DP4018N2M 18 V 2.22 A 3.0 A ± 5% 150 mV West Midlands, DY5 1LX DP4018N3M 18 V 2.22 A 3.0 A ± 5% 150 mV United Kingdom DP4024N2M 24 V 1.67 A 2.2 A ± 5% 240 mV Telephone: +44 (0) 1384 842 211 DP4024N3M 24 V 1.67 A 2.2 A ± 5% 240 mV Facsimile: +44 (0) 1384 843 355 DP4048N2M 48 V 0.84 A 1.2 A ± 5% 480 mV DP4048N3M 48 V 0.84 A 1.2 A ± 5% 480 mV Asia (HK) 1. Peak current lasting < 15 seconds with a maximum 10% duty cycle. 14/F, Lu Plaza 2. At 25 ºC including initial tolerance, line voltage, load currents and output voltages adjusted to factory settings. 2 Wing Yip Street 3. Peak-to-peak with 20 MHz bandwidth and 10 µF (tantalum capacitor) in parallel with a 0.1 µF capacitor at rated line Kwun Tong, Kowloon voltage and load ranges. Hong Kong Mechanical Drawing Telephone: +852 2176 3333 Facsimile: +852 2176 3888 For global contact, visit: www.Emerson.com/EmbeddedPower techsupport.embeddedpower 4.88" 48" (124.0) (1219 ± 20) @emerson.com While every precaution has been taken to ensure accuracy and completeness in this literature, Emerson Network Power assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions. Emerson Network Power. The global leader in enabling business-critical continuity. AC Power Connectivity DC Power Embedded Computing 4.88" 48" (124.0) (1219 ± 20) Embedded Power Monitoring Outside Plant Power Switching & Controls Precision Cooling Racks & Integrated Cabinets Services Surge Protection Notes: EmersonNetworkPower.com 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is ± 0.02” (± 0.5 mm) Emerson Network Power and the Emerson 3. Warranty: 2 year Network Power logo are trademarks and service marks of Emerson Electric Co. 4. Weight: 0.55 lb./ .25 kg ©2011 Emerson Electric Co. 5. AC input power cord sold separately. 6. Specifications are for convection rating at factory settings at 115 Vac input, 25 °C unless otherwise stated 1.55" 2.4" 2.4" (39.5) 1.55" (61.0) (39.5) (61.0) Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Emerson Network Power : DP4009N2M DP4009N3M DP4015N2M DP4015N3M DP4018N2M DP4018N3M
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the DP4015N3M have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods