W9959_02_DCDC_001-073_73 2/8/02 3:55 PM Page 58 Total Power: 1200 Watts Input Voltages: 85-265 VAC 1200 Watts No. of Outputs: Single APA100 (PFC) Electrical Specs Input Input Voltage 85 to 265 Vac Input Frequency 50/60 Hz Efficiency 92% typical (VI = 115 Vac); 94% typical (VI = 230 Vac) Total Harmonic Distortion Less than10% Power Factor 0.99 typical (IO = 2A); 0.97 typical (IO = 1A) Control Power Fail Warning Direct drive output to opto-isolator Power Fail Warning Adjust 205 to 355 Vdc adjustable LD Enable Direct drive output to opto-isolator PFC Enable TTL compatible (low to enable) Voltage Adjust 240V to 393V Special Features Clock Input (external sync) 3.3 to 5.5Vp-p @ 1MHz ± 5% Clock Output (int. clock) 4.5Vp-p typical @ 1MHz ± 0.5% Temperature • Unity power factor Monitor Output 10 mV/°K (2.73V = 0°C) • High efficiency - up to 96% Current Monitor Output 0 to 1.28mA (1 mA = 2.5A) • Universal input voltage and frequency range • Up to 1200W output power Output • Parallelable with current sharing within 3% Output Voltage 383 V typical (IO = 2A); 393 V typical • < 10% harmonic distortion (IO = 0A) conforming to IEC555-2 Current Share Accuracy 3% typical • 85°C baseplate operating Overvoltage Protection 417 V typical temperature (no derating) Power Limit VIN=85Vac; Pmax=750W • High reliability - over 1 million VIN=180Vac; Pmax= 918W hours MTBF VIN=230Vac; Pmax= 1200W • Power fail warning signal • PLD feature • Enable output to control AMPSS® DC-DC converters • 125Khz fixed Switching frequency Environmental Safety Operating temperature (baseplate): UL UL 1950 E132002 -20°C to +85°C (no derating) CSA CSA22.2-234 LR53 982C CSA22.2-950 Storage temperature: -40°C to +105°C EN 60950 20396-3336-1012 Overtemperature protection: 90°C typical VDE IEC950 MTBF: > 1 million hours (50°C baseplate) CE CE Mark (LVD) 58 America’s (USA): 1-888-41-ASTEC Europe (UK): 44 (1384) 842-211 Asia (HK): 852-2437-9662 Astec Integrated Power APA100 (PFC) Astec Integrated Power W9959_02_DCDC_001-073_73 2/8/02 3:55 PM Page 59 EUROPE ASIA AMERICAS Astec House, Waterfront Business Park Units 2111-2116, Level 21 5810 Van Allen Way Merry Hill, Dudley Tower1, Metroplaza Carlsbad, CA 92008 West Midlands, DY5 1LX, UK 223, Hing Fong Road Telephone: 760-930-4600 Telephone: 44 (1384) 842-211 Fwai Fong, New Territories Facsimile: 760-930-0698 Facsimile: 44 (1384) 843-355 Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 Ordering Information Part Number Description Notes APA100-101 1200W Low Profile PFC Module For parallel operation the total input current must be <16A rms. APA100-103 950W Low Profile PFC Module Inrush current limited protection required APA100-102 1200W Low Power PFC Module Designed for parallel operation where the total input current >16A rms-requires external rail rectifiers APA100-104 1200W Low Profile PFC Module THERMAL BASE PLATE* 12.7 (0.50) 4 OUTPUT PINS 4 INPUT PINS 14 CONTROL PINS Pin Assignments Input Output Control Pins 31-32. L1 21-22. +ve 1. RSV (Reserved) 34 29 28 33 33-34. L2 28-29. –ve 2. TEMP MON 8 14 3. C MON 7 1 32 22 4. C SHARE 31 21 5. CLK OUT 6. CLK IN 7. RSV (Reserved) 8. RSV (Reserved) 116.8 (4.60) 9. V ADJ 10. PFW ADJ + O/P C SHARE 11. S GND CLK OUT 12. PFW 7 1 Output to AMPSS™ Modules 13. LD ENABLE 8 14 14. PF ENABLE – O/P + O/P C SHARE CLK IN 7 1 8 14 – O/P + O/P APA100-xxx AM80A-300L L2 + O/P + I/P 1 1 7 6 + SENSE + 385Vdc 85 to 265 Vac Load – SENSE 8 14 7 12 L1 – O/P – I/P – O/P AM80A-300L + O/P + I/P 6 1 + SENSE + – SENSE Power Fail Warning Adjust 7 12 – I/P – O/P www.astec.com 59 TM AMPSS POWER MODULE 61.0 (2.40)