ARIES ELECTRONICS 14-810-90

™ Series 800 Vertisockets Vertical Mounting with Bifurcated Contacts FEATURES: TM • Aries offers a full line of Vertisockets for DIP packaging of LEDs, incandescent lamps, DIP switches, test points, etc. The variations of mounting position and pin configuration provide exceptional design freedom. • Restricted entry for contact protection. • Accepts standard LEDs and incandescent displays as well as .500 [12.70] and .600 [15.24] high large displays. SPECIFICATIONS: • Standard body material is red UL 94-HB Glass-filled Nylon. • Hi-temp body material is black 94V-0 4/6 Nylon. • Bifurcated contacts are Grade A spring-tempered Phosphor Bronze per QQ-B-750. • Contact plating is either 100µ [2.54µm] min. Tin per MIL-T- 10727 or 10µ [.254µm] min. Gold per MIL-G-45204, over 50µ [1.27µm] min. Nickel per QQ-N-290. Note: Aries specializes in custom design and production. In addition to the • Contact current rating=1.5 Amps. standard products shown on this page, special materials, platings, sizes, and configurations can be furnished, depending on quantities. Aries reserves the • Operating temperature=221 °F [105°C] Tin plating, right to change product specifications without notice. =257°F [125°C] Gold plating. • Insertion Force=110 grams/pin average; Withdrawal ORDERING INFORMATION Force=75 grams/pin average. XX-X810-90XXX • Accepts flat leads up to .014 [.36] thick and .020 [.51] wide; Optional suffix: round leads up to .020 [.51] in diameter. WR=Without No. of pins • Accepts lead lengths: .075-.160 [1.91-4.06]. rails (see table) MOUNTING CONSIDERATIONS: V0=UL94V-0 Series: • Suggested PCB hole size=.044 ± .002 [1.12 ± .05] dia. plastic 2810: “C”=.200 [5.08] ALL DIMENSIONS: INCHES [MILLIMETERS] 810: “C”=.300 [7.62] T=Tin plating No suffix=Gold plating 6810: “C”=.600 [15.24] All tolerances ± .005 [.13] Display angle unless otherwise specified “A”=(NO. OF PINS PER ROW X .100 [2.54]) + .050 [1.27] Consult Data “B”=(NO. OF PINS PER ROW - 1) X .100 [2.54] Sheet No. 13001 for Horizontal Mounting TM Vertisockets with bifurcated contacts. 90° ± 2° Consult factory for other display angles CONTACT DETAIL Consult factory for non-standard sizes Centers “C” Dim. “D” Available Sizes .200 [5.08] .290 [7.37] 8, 10 .300 [7.62] .390 [9.91] 8, 14, 16, 18, 20 .600 [15.24] .690 [17.53] 8, 10, 12, 14, 16, 18, 20 NORTH AMERICA UK/IRELAND/GB EUROPE/MAINLAND/HOLLAND Frenchtown, NJ USA TEL: +44 870 240 0249 TEL: +31 78 615 94 65 TEL: (908) 996-6841 FAX: +44 1653 690980 FAX: +31 78 615 43 11 13002 http://www.arieselec.com • info@arieselec.com FAX: (908) 996-3891 uking@arieselec.com europe@arieselec.com REV.B PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED