ARBOR TECHNOLOGY PIA-3386
Specifications
Bi-directional Parallel Port
supports SPP, EPP and ECP mode. BIOS enabled/disabled
BIOS
Y2k compliant AMI system BIOS
Board Dimensions
90 (L) x 96 (W) mm.
Board Weight
105 g
Bus Interface
PC/104
Bus Speeds
PC/104 - 8 MHz (above values are defaults, bus speeds are programmable up to 16 MHz)
Capacity
1-244 MByte capacity
Chipset
ALi 5113 (jumper enable/disable)
Topro TP6508IQ
Compatibility
IBM VGA hardware
CPU + Chipset
ALi M6117D is an implementation of an INTELcompatible 386SX-40 CPU a watchdog timerand ALi's M1217B chipset
Data Bus
16-bit
Data Reliability
ECC/EDC error correction
Display
CRT and Flat Panel Mono/TFT/DSTN/EL
DMA Controllers
8237 x 2
DRAM Memory
4 MB EDO DRAM onboard
Enhanced IDE
supports one port and up to two hard drives or Enhanced IDE devices of PIO mode 4.
Extended Operating Temperature
-20 ~ +60°C (-4 ~ 140°F)
Floppy Disk Drive Interface
supports up to two floppy drives, 5¼" (360 KB or 1.2 MB) and 3½" (720 KB, 1.44 MB)
Interrupt Controllers
8259 x 2
Keyboard and Mouse Connectors
Internal 5-pin header for AT-keyboar Internal 5-pin header for PS/2-mouse
Memory
1 MB onboard
Memory Window
8 KByte
Package
Single Chip FlashDisk in 32-pin DIP JEDEC
Panel Data Bus
24-bit
Power Requirements
single voltage +5 V @ 800 mA with 4 MB EDO installed
Real-time Clock
included in M6117D with onboard lithium battery backup for 10 years of data retention.CMOS data backup of BIOS setup and default
Serial ports
one high speed RS-232 port, one high speed RS-232/485 port (jumper selectable). Both with 16C550 UART and 16 byte FIFO.
System Bus
16-bit ISA bus
Watchdog Timer
generates either a RESET, NMI or an IRQ when your application loses control over the system. Optionally the watchdog can trigger a user specified interrupt. The watchdog is configurable from 30.5 ms to 512 seconds(in 30.5 ms segments)
Datasheet
Extracted Text
fi ALi M6117D Embedded Chipset: 386SX CPU + watchdog timer + M1217B CRT SVGA 4 MB EDO PIA-3386 Onboard PS/2 Mouse COM1 Flat Panel / CRT RS-232 HM 86508 FDD EIDE COM2 RS-232 16-bit Flat Panel SVGA DIO Digital I/O COM2 Parallel Keyboard Socket for RS-485 Port DiskOnChip 386SX-40 Module with LCD/CRT, 16-bit DIO and DiskOnChip socket Check for other displays. General specifications High Speed Multi I/O CPU + Chipset Chipset ALi M6117D is an implementation of an INTEL ALi 5113 (jumper enable/disable) Flash Disk DiskOnChipfi compatible 386SX-40 CPU a watchdog timer Serial ports Package and ALi’s M1217B chipset one high speed RS-232 port, one high speed Single Chip FlashDisk in 32-pin DIP JEDEC BIOS RS-232/485 port (jumper selectable). Both Capacity Y2k compliant AMI system BIOS with 16C550 UART and 16 byte FIFO. 1-244 MByte capacity DRAM Memory Floppy Disk Drive Interface Data Reliability 4 MB EDO DRAM onboard supports up to two floppy drives, 5…" (360 KB ECC/EDC error correction or 1.2 MB) and 3‰" (720 KB, 1.44 MB) Bus Interface Memory Window PC/104 Bi-directional Parallel Port 8 KByte supports SPP, EPP and ECP mode. BIOS Data Bus enabled/disabled 16-bit Environmental and Power Bus Speeds PC/104 - 8 MHz (above values are defaults, Power Requirements Flat Panel Display Controller bus speeds are programmable up to 16 MHz) single voltage +5 V @ 800 mA with 4 MB EDO Chipset installed DMA Controllers Topro TP6508IQ Board Dimensions 8237 x 2 Memory 90 (L) x 96 (W) mm. Interrupt Controllers 1 MB onboard Board Weight 8259 x 2 System Bus 105 g Enhanced IDE 16-bit ISA bus supports one port and up to two hard drives or Extended Operating Temperature Panel Data Bus -20 ~ +60�C (-4 ~ 140�F) Enhanced IDE devices of PIO mode 4. 24-bit Watchdog Timer Display generates either a RESET, NMI or an IRQ CRT and Flat Panel Mono/TFT/DSTN/EL when your application loses control over the Ordering Compatibility system. Optionally the watchdog can trigger a IBM VGA hardware PIA-3386: PC/104 386SX-40 Core Module user specified interrupt. The watchdog is Supported Flat Panels with 4 MB EDO, Flat Panel/CRT Display configurable from 30.5 ms to 512 seconds NEC NL-6448AC26-04 TFT 10.4" 640X480 Controller and DiskOnChip socket (in 30.5 ms segments) NEC NL-6448AC30-10 TFT 9.4" 640X480 Real-time Clock NEC NL-6448AC30-03 TFT 9.4" 640X480 included in M6117D with onboard lithium NEC NL-6448AC33-10 TFT 10.4" 640X480 battery backup for 10 years of data retention. NEC NL-6448AC33-13 TFT 10.4" 640X480 CMOS data backup of BIOS setup and default NEC NL-6448AC33-18 TFT 10.4" 640X480 Keyboard and Mouse Connectors NEC NL-8060BC31-09 TFT 12’1 800X600 Internal 5-pin header for AT-keyboard NEC NL-8060AC31-02 TFT 10.4" 800X600 Internal 5-pin header for PS/2-mouse NEC NL-8060AC31-01 TFT 10.4" 800X600 SHARP LQ10D42 TFT 10.4" 640X480 SHARP LQ10D421 TFT 10.4" 640X480 Year 2000 SHARP LM64C35P MONO 10.4" 640X480 Compliant Planar EL640.480 EL color 10.4" 640X480 Note all specifications are subject to change without notice
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the PIA-3386 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods