Elite.Parts

Image of ARBOR TECHNOLOGY EmCORE-i411DVL2

Description

Arbor EmCORE-i411DVL2 CPU Board. 3.5" Embedded ZFx86 Miniboard with Flat Panel Display Controller Dual Ethernet | DiskOnChip socket and CompactFlash socket (includes 32MB onboard SDRAM)

Part Number

EmCORE-i411DVL2

Price

Request Quote

Manufacturer

ARBOR TECHNOLOGY

Lead Time

Request Quote

Category

EMBEDDED COMPUTING

Specifications

BIOS

Phoenix Embedded PC BIOS with RS-232 console redirection for headless BIOS access

Chipset

Dual RTL8139C 10/100 Mbps, autoswitching
SMI SM712G4AA LynxEM4+

Connector

2 x 10-pin onboard headers

CPU + Chipset

ZFx86 Failsafe 486 CPU core operating at 133, 100, 66 and 33 MHz with 32-bit 33 MHz PCI rev 2.1 compliant “Northbridge” and “Southbridge” FailSafe internal Boot ROM that allows execution of multiple instruction sets: DRAM clear, Flash erase, executable load and run, Provides permanent and fail-safe mechanism

Dimension (L x W)

145 x 102 mm (5.7" x 4")

Display Memory

4 MB memory on dye

Display Type

CRT, Flat Panel (TFT, DSTN)

Enhanced IDE

2 ports and up to four ATAPI devices with Ultra DMA 33 Mhz

Expansion Interface

PC/104 (ISA)

Flash Disk

One DiskOnChip2000 socket, CompactFlash Type I/II

Floppy

1 x 3½" floppy disk drive

GPIO

16-bit GPIO

K/B & Mouse

AT Keyboard and PS2 Mouse

LCD Interface

TTL 24-bit

Operating Temperature

0 ~ 60°C (32 ~ 140°F)

Parallel

SPP, EPP and ECP mode

Power Requirement

5 V @ 1A (typical) with 32 MB DRAM and 8 MB Flash disk at 100 MHz

Relative Humidity

Up to 90% @ 55°C

Resolution

1024 x 768 24bpp

Serial

Three high speed RS-232C ports (COM1, 3, 4) and one jumper selectable RS-232C/422/485 (COM2), all provide jumper selecable +5V/+12V DC power

System Memory

32 MB Synchronous DRAM on board

USB

2 USB v.1.1 ports and Open HCL compliant

Watchdog Timer

Embedded application Dual Watchdog Timer (WDT) with SW and HW control of the WDT event 16 bit counter primary watchdog connected to SW IRQ/NMI/SMI reset by Watch Dog Timer Input (WDI). Second 8 bit counter output connected to H/W reset line enabled by primary counter output

Weight

0.24 Kg (0.53 Ib)

Features

32 MB SDRAM soldered on board
CompactFlash type l/II
Dual LAN 10/100 Mbps, RTL 8139C
Flat Panel / CRT support
ZFx86 FailSafe embedded System on-a-chip

Datasheet

EmCORE-i411.pdf

125 KiB

Download

Extracted Text

EmCORE-i411 3.5” ZFx86 Miniboard with Flat Panel / CRT, Dual LAN and 4 Serial Four Serial Ports Flat Panel / CRT SVGA RS-232/422/485 SMI LynxEM4+ FCC Features Single +5 V✱✱✱✱✱ZFx86 FailSafe embedded operation Digital I/O System on-a-chip ✱✱✱✱✱32 MB SDRAM soldered on board PC/104 ✱✱✱Flat Panel / CRT support✱✱ Connector ZFx86 FailSafe™ ® DiskOnChip✱✱✱✱✱Dual LAN 10/100 Mbps, RTL 8139C Embedded up to 1 GB PC-on-a-Chip ✱✱✱✱✱CompactFlash™ type l/II Dual LAN 2x Ultra DMA EIDE 10/100 Mbps 44-pin connector with power Specifications System Display CPU + Chipset: ZFx86 Failsafe 486 CPU core operating at 133, 100, Chipset: SMI SM712G4AA LynxEM4+ 66 and 33 MHz with 32-bit 33 MHz PCI rev 2.1 compliant Display Memory: 4 MB memory on dye “Northbridge” and “Southbridge” FailSafe internal Boot ROM that Display Type: CRT, Flat Panel (TFT, DSTN) allows execution of multiple instruction sets: DRAM clear, Flash Resolution: 1024 x 768 24bpp erase, executable load and run, Provides permanent and fail-safe LCD Interface: TTL 24-bit mechanism System Memory: 32 MB Synchronous DRAM on board Mechanical and Environment Enhanced IDE: 2 ports and up to four ATAPI devices Power Requirement: 5 V @ 1A (typical) with Ultra DMA 33 Mhz with 32 MB DRAM and 8 MB Flash disk at 100 MHz BIOS: Phoenix Embedded PC BIOS with RS-232 console redirection Operating Temperature: 0 ~ 60°C (32 ~ 140°F) for headless BIOS access Relative Humidity : Up to 90% @ 55°C Watchdog Timer: Embedded application Dual Watchdog Timer Dimension (L x W): 145 x 102 mm (5.7" x 4") (WDT) with SW and HW control of the WDT event 16 bit counter Weight: 0.24 Kg (0.53 Ib) primary watchdog connected to SW IRQ/NMI/SMI reset by Watch Dog Timer Input (WDI). Second 8 bit counter output connected to Inside the ZFx86 chip H/W reset line enabled by primary counter output Expansion Interface: PC/104 (ISA) Multiple I/O Serial: Three high speed RS-232C ports (COM1, 3, 4) and one jumper selectable RS-232C/422/485 (COM2), all provide jumper selecable +5V/+12V DC power Parallel: SPP, EPP and ECP mode Floppy: 1 x 3½" floppy disk drive USB: 2 USB v.1.1 ports and Open HCL compliant K/B & Mouse: AT Keyboard and PS2 Mouse GPIO: 16-bit GPIO LAN Chipset: Dual RTL8139C 10/100 Mbps, autoswitching Connector: 2 x 10-pin onboard headers Ordering Information Flash Disk EmCORE-i411DVL2 One DiskOnChip2000 socket 3.5" Embedded ZFx86 miniboard with Flat Panel Display CompactFlash Type I/II Controller Dual Ethernet, DiskOnChip socket and CompactFlash socket (includes 32 MB onboard SDRAM) SCDB-1271 Page 3- 47 DC to DC Power Module www .arbor .com.tw 2-15 Embedded Computing

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products