ARBOR TECHNOLOGY 3302885
Specifications
BIOS
AMI system BIOS
Board Dimensions
185 (L) x 122 (W) mm.
Board Type
Half Size
Board weight
0.22 Kg
Bus Interface
ISA and PC/104
Bus Speeds
ISA - 8 MHz, PC/104 - 8 MHz (above values are defaults, bus speeds are programmable up to 16 MHz)
CPU + Chipset
ALi M6117D is an implementation of an INTEL compatible 386SX-40 CPU a watchdog timer and ALi's M1217B chipset
Data Bus
16-bit
DMA channels
7
DMA Controllers
8237 x 2
DRAM Memory
1 MB up to 64MB of FPM or EDO DRAM, 2 sockets for 72-pin single side SIMM modules, two banks
Green Function
power saving options supported in BIOS. DOZE / STANDBY / SUSPEND modes
Interrupt Controllers
8259 x 2
Interrupt levels
15
Operating Temperature
-10~+70C
Power Requirements
+5 V @ 600 mA, ±12 V @ 20 mA with 1 MB DRAM and 1 MB Flash disk installed
Features
- ?2 Onboard Flash/EPROM Disks or DiskOnChip Flash disk
- ?AMI 386SX BIOS
- ?Enhanced IDE and high speed Multi I/O supports RS-232/485 and a PS/2 mouse
- ?FP or EDO DRAM 1~64 MB two SIMM socket(bank 1 and bank 0),
- ?PC/104 connector
- Low power consumption by using embedded chipset ALI M6117D => chipset + CPU + watchdog
Datasheet
Extracted Text
.. . .. . . . . . . . . . PIA-632 Highly Embedded 386SX-40 CPU Card supports EDO Memory and Flash/ROM or 2 DiskOnChip Disks COM2 Year 2000 RS-485 Compliant COM1 RS-232 COM2 RS-232 Keyboard PS/2 mouse fi ALi M6117D : Two sockets for PC/104 386SX CPU + Flash/EPROM Disk Connector watchdog timer or 2 DiskOnChip M1217B chipset The PIA-632EM is a highly integrated FLASH/EPROM DISK single board computer based on the OR DISKONCHIP Special Features ALi’s M6117D microprocessor opti- Two onboard sockets can accept up to mized for embedded designs. � Low power consumption by 2 MB EPROM or 1 MB Flash memory. using embedded chipset Both sockets can by jumper setting be ALi’s M6117D combines an 386SX-40 ALI M6117D => assigned to hold a DiskOnChip. compatible processor , a watchdog chipset + CPU + watchdog timer and ALi’s M1217B on a single WATCHDOG TIMER chip. Together with its PC/104 bus and � FP or EDO DRAM 1~64 MB onboard Flash/ROM or dual DiskOnChip The watchdog timer optionally monitors two SIMM socket disk the card easily qualifies for low system operation. The watchdog timer (bank 1 and bank 0), power consumption, non-passive is programmable by software. It can backplane SBC applications. either generate an NMI or Reset or can � 2 Onboard Flash/EPROM Disks be assigned to a user specified IRQ. The card can accept both Fast Page or DiskOnChip Flash disk DRAM and EDO system memory PRICE/PERFORMANCE � Enhanced IDE and high speed With its industrial grade reliability, the ENHANCED IDE, HIGH SPEED I/O Multi I/O supports RS-232/485 PIA-632EM can operate continuously at and a PS/2 mouse In addition, the PIA-632EM has one temperatures up to 70�C. Its embedded PS/2 mouse port, two serial ports features provide an ideal price/perfor- � AMI 386SX BIOS (RS-232 x 1, RS-232/485 x 1), one mance solution for commercial and bi-directional printer port that supports industrial applications where stability � PC/104 connector SPP, ECP and EPP modes, an enhanced and reliability are essential. IDE HDD interface that supports PIO mode 4, and a floppy disk controller. ® Single Board Computers Arbor Industrial PC-based Automation ... . ... . . . . . . . ONBOARD FLASH/ROM DISK Specifications � Sockets : 2 (DIP type) � CPU + Chipset : ALi M6117D is an implementation of an � Capacity : 2 MB (EPROM), 1 MB (Flash) INTEL compatible 386SX-40 CPU a watchdog timer and � Memory support : ALi’s M1217B chipset Flash : SST28SF040 or AT29C040A � BIOS : AMI system BIOS EPROM : 27010, 27020, 27040 or 27080 � Green Function : power saving options supported in BIOS. DOZE / STANDBY / SUSPEND modes FLASH DISK DISKONCHIP® � Package : Single Chip FlashDisk in 32-pin DIP JEDEC � DRAM Memory: 1 MB up to 64MB of FPM or EDO DRAM, 2 sockets for 72-pin single side SIMM modules, two banks � Capacity : 1-72 MByte capacity (future capacities: 144 MByte and up) � Bus Interface : ISA and PC/104 � Data Reliability : ECC/EDC error correction � Data Bus : 16-bit � Memory Window : 8 KByte � Bus Speeds : ISA - 8 MHz, PC/104 - 8 MHz (above values are defaults, bus speeds are programmable ENVIRONMENTAL AND POWER up to 16 MHz) � Power Requirements: � DMA Controllers : 8237 x 2 +5 V @ 600 mA, –12 V @ 20 mA with 1 MB DRAM and 1 MB Flash disk installed � DMA Channels : 7 � Board Dimensions : 185 (L) x 122 (W) mm. � Interrupt Controllers : 8259 x 2 � Board Weight : 0.22 Kg � Interrupt Levels : 15 � Operating Temperature: -10~+70 �C � Enhanced IDE : supports one port and up to two hard drives or Enhanced IDE devices of PIO mode 4. BIOS enabled/disabled � Watchdog Timer : Ordering generates a system RESET or NMI when your application loses control over the system. Optionally the watchdog can q PIA-632EM: Highly Embedded 386SX-40 CPU Card trigger a user specified IRQ. The watchdog is configurable with EDO support and 2 sockets for Flash/ROM from 30.5 ms to 512 seconds (in 30.5 ms segments) or DiskOnChip � Real-time Clock : Dallas DS-12887 or compatible with lithium battery backup for 10 years of data retention. CMOS data backup of BIOS setup and BIOS default. � Keyboard and Mouse Connectors: Mini DIN connector for AT-keyboard and PS2 Mouse Internal 5-pin header for AT-keyboard Internal 5-pin header for PS/2-mouse HIGH SPEED MULTI I/O � Chipset : ALi 5113 (jumper enable/disable) � Serial ports: one external high speed RS-232 port, one external high speed RS-232/485 port (jumper selectable). Both with 16C550 UART and 16 byte FIFO. BIOS enabled/disabled � Floppy Disk Drive Interface: supports up to two floppy drives, 5… " (360 KB or 1.2 MB) and 3‰ " (720 KB, 1.44 MB). BIOS enabled/disabled � Bi-directional Parallel Port: supports SPP, EPP and ECP mode. BIOS enabled/disabled ® Single Board Computers Arbor Industrial PC-based Automation 20DC063211
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the 3302885 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods