Technical Data Sheet Bluetooth Test Set MT8852B Introduction This document provides specifications for the MT8852B Bluetooth Test Set and lists ordering information and option and accessory codes. A color brochure (part number 11410-00399) is also available from the Anritsu website (www.us.anritsu.com). The brochure provides in-depth descriptions of MT8852B applications, features, and benefits when testing a wide range of Bluetooth products. The Bluetooth wordmark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Anritsu is under license. Specifications Characteristic/Parameter Specification All measurements made in compliance with Bluetooth core specifications Basic Rate measurements 3.0 + HS Test Suite Structure (TSS) and Test Purposes (TP) Specification 1.2/2.0/2.0 + EDR/2.1/2.1 + EDR/3.0/3.0 + HS Output Power TRM/CA/01/C Hopping: OFF or ON – measure at Defined, All, or Any frequencies Loopback or TX mode Measurement configuration Payload: PRBS 9 Packet type: DH1, DH3, DH5 Average power Displayed results Peak power Number of measurement frequencies Three, default to RF Test Specification or user defined Measurement range +22 dBm to –50 dBm average power (+23 dBm peak power) Resolution 0.1 dB +20 dBm to –35 dBm, ±1 dB Accuracy +22 dBm to +20 dBm, ±1.5 dB Power Control TRM/CA/03/C Hopping: OFF Loopback or TX mode Measurement configuration Payload: PRBS 9 Packet type: DH1, DH3, DH5 Maximum power Minimum power Displayed results Maximum step size Minimum step size Power at each power step Number of measurement frequencies Three, default to RF Test Specification or user defined Measurement range +22 dBm to –35 dBm average power (+23 dBm peak power) Resolution 0.1 dB +20 dBm to –35 dBm, ±1 dB Accuracy +22 dBm to +20 dBm, ±1.5 dB Enhanced Power Control TRM/CA/14/C Hopping: OFF Loopback or TX mode Measurement configuration Payload: PRBS9 Packet type: DH1, 2DH1, 3DH1 Maximum power for each packet type Minimum power for each packet type Displayed result Maximum power step for each packet type Minimum power step for each packet type Maximum power difference at any step between DHn and 2DHn or 3DHn packets Number of measurement frequencies Three, default to RF Test Specification or user defined Measurement range +22 dBm to -35 dBm average power (+23 dBm peak power) Resolution 0.1 dB +20 dBm to -35 dBm, ±1.0 dB Accuracy +22 dBm to +20 dBm, ±1.5 dB Initial Carrier Frequency Tolerance TRM/CA/08/C Hopping: OFF or ON – measure at Defined, All, or Any frequencies Loopback or TX mode Measurement configuration Payload: PRBS 9 Packet type: DH1 Average initial frequency error Displayed results Maximum positive frequency error Maximum negative frequency error Number of measurement frequencies Three, default to RF Test Specification or user defined RF input measurement range +20 dBm to –35 dBm Initial frequency error measurement range 0 Hz to ±150 kHz Frequency resolution 1 kHz Accuracy 500 Hz ± Frequency Standard 2 Characteristic/Parameter Specification Carrier Frequency Drift TRM/CA/09/C Hopping: OFF or ON – measure at Defined, All, or Any frequencies Loopback or TX mode Measurement configuration Payload: 10101010 Packet type: DH1, DH3, DH5 Carrier frequency drift Displayed results Drift rate Number of measurement frequencies Three, default to RF Test Specification or user defined RF input measurement range +20 dBm to –35 dBm Frequency drift measurement range 0 Hz to 200 kHz, and >2000/50 µs Frequency resolution 1 kHz Sensitivity - Single Slot Packets RCV/CA/01/C Hopping: OFF or ON, user selectable Loopback only Measurement configuration Payload: PRBS9 Packet type: DH1 Dirty transmitter (as defined in the RF test spec): ON or OFF, user defined BER (percentage) Displayed results Total number of bit errors and FER Number of measurement frequencies Three, default to RF Test Specification or user defined Number of measured bits 1 to 10,000 packets (216 to 2,160,000 bits) Output power range 0 dBm to –90 dBm, resolution 0.1 dB Output power accuracy ±1 dB, 0 dBm to –80 dBm BER/FER measurement range 0.000% to 100% BER/FER resolution 0.001% Sensitivity - Multi Slot Packets RCV/CA/02/C Hopping: OFF or ON, user selectable Loopback only Measurement configuration Payload: PRBS 9 Packet type: DH3, DH5 Dirty transmitter (as defined in RF test spec): ON or OFF, user defined BER (percentage) Displayed results Total number of bit errors and FER Number of measurement frequencies Three, default to RF Test Specification or user defined 1 to 10,000 packets (for DH3, 1,464 to 14,640,000 bits), Number of measured bits (for DH5, 2,712 to 27,120,000 bits) Output power range 0 dBm to –90 dBm, 0.1 dB resolution Output power accuracy ±1 dB, 0 dBm to –80 dBm BER/FER measurement range 0.000% to 100% BER/FER resolution 0.001% Modulation Characteristics TRM/CA/07/C Hopping: OFF Loopback or TX mode Measurement configuration Payload: 11110000 and 10101010 Packet type: DH1, DH3, DH5 Frequency deviation ∆f1max Displayed results ∆f2max ∆f1avg ∆f2avg and ∆f2avg/∆f1avg plus % of ∆f2max <115 kHz Number of measurement frequencies Three, default to RF Test Specification or user defined RF input measurement range +20 dBm to –35 dBm Deviation measurement range 0 Hz to 350 kHz peak Deviation resolution 1 kHz Accuracy 1% for modulation index = 0.32 3 Characteristic/Parameter Specification Maximum Input Level RCV/CA/06/C Hopping: OFF Loopback only Measurement configuration Payload: PRBS 9 Packet type: DH1 BER (percentage) Displayed results Total number of bit errors and FER Number of measurement frequencies Three, default to RF Test Specification or user defined Number of measured bits 1 to 10,000 packets (216 – 2,160,000 bits) Output power range 0 dBm to –90 dBm, resolution 0.1 dB Output power accuracy ±1 dB, 0 dBm to –80 dBm EDR Measurements EDR Relative Transmit Power TRM/CA/10/C Hopping: Off and On – measure at Defined, All, or Any frequencies Modulations: π/4DQPSK and 8DPSK Measurement configuration Packet type: 2-DH1, 3, 5 and 3-DH1, 3, 5 Loopback or TX mode EUT power level: Max and Min Max differential power (from all packets) Displayed results Min differential power (from all packets) Average differential power (over all packets) Number of measurement frequencies Three, default to RF Test Specification or user defined Measurement range +20 to –35 dBm average power (+23 dBm peak power) Relative power resolution 0.01db, GFSK to π/4DQPSK and 8DPSK Relative power measurement accuracy between GFSK and π/4DQPSK Relative power accuracy or 8DPSK, 0.2 dB typical for a power difference of <6 dB Relative power measurement range between GFSK and π/4DQPSK or 8DPSK, Relative power measurement range (P –8 dB) < P < (P +4 dB) GFSK DPSK GFSK EDR Carrier Frequency Stability TRM/CA/11/C and Modulation Accuracy Hopping: Off and On – measure at Defined, All, or Any frequencies Modulations: π/4DQPSK and 8DPSK Measurement configuration Packet type: 2-DH1, 3, 5 and 3-DH1, 3, 5 Loopback or TX mode EUT power level: Max and Min Initial frequency error ω i Frequency error ω o Frequency error ω + ω i o Displayed results RMS DEVM (block with greatest DEVM value displayed) Peak DEVM 99% DEVM Average RMS DEVM (average DEVM for all blocks measured) Number of measurement frequencies Three, default to RF Test Specification or user defined Carrier frequency stability 0 Hz to ±100 kHz measurement range Carrier frequency stability accuracy 500 Hz ± Frequency Standard Carrier frequency stability resolution 1 kHz RMS DEVM range 30% π/4DQPSK, 20% 8DPSK RMS DEVM resolution 0.1% π/4DQPSK and 8DPSK Peak DEVM range 0 to 50% π/4DQPSK, 0 to 30% 8DPSK Peak DEVM resolution 0.1% π/4DQPSK and 8DPSK 4 Characteristic/Parameter Specification EDR Differential Phase Encoding TRM/CA/12/C Hopping: OFF and ON, user selectable Modulations: π/4DQPSK and 8DPSK Measurement configuration Packet type: 2-DH1, 3, 5 and 3-DH1, 3, 5. Number of test packets: default 100 TX mode only Number of packets received Displayed results Number of packets with payload data errors Percentage of errored packets Number of measurement frequencies Three, default to RF Test Specification or user defined EDR Sensitivity RCV/CA/07/C Hopping: OFF and ON, user selectable Modulations: π/4DQPSK and 8DPSK Packet type: 2-DH1, 3, 5 and 3-DH1, 3, 5. Measurement configuration Bit threshold control: Threshold 1, 1.6 million bits, Threshold 2, 16 million bits (user editable) Loopback only Dirty transmitter (as defined in RF test spec): ON or OFF, user selectable Overall BER (displayed in exponential format) Number of bits in error Displayed results Number of packets sent by test set Number of packets received in error by EUT Number of measurement frequencies Three, default to RF Test Specification or user defined Output power range 0 to –90 dBm, resolution 0.1 dB Output power accuracy ±1 dB, 0 dBm to –80 dBm EDR BER Floor Performance RCV/CA/08/C Hopping: OFF and ON, user selectable Modulations: π/4DQPSK and 8DPSK Measurement configuration Packet type: 2-DH1, 3, 5 and 3-DH1, 3, 5 Bit threshold control: Threshold 1, 8 million bits, Threshold 2, 160 million bits (user editable) Loopback only Overall BER (displayed in exponential format) Number of bits in error Displayed results Number of packets sent by test set Number of packets received in error by EUT Number of measurement frequencies Three, default to RF Test Specification or user defined Output power range 0 to –90 dBm, resolution 0.1 dB Output power accuracy ±1 dB, 0 dBm to –80 dBm EDR Maximum Input Level RCV/CA/10/C Hopping: OFF and ON, user selectable Modulations: π/4DQPSK and 8DPSK Measurement configuration Packet type: 2-DH1, 3, 5 and 3-DH1, 3, 5 Number of bits: default 1.6 million (user editable) Loopback only Overall BER (displayed in exponential format) Number of bits in error Displayed results Number of packets sent by test set Number of packets received in error by EUT Number of measurement frequencies Three, default to RF Test Specification or user defined Output power range 0 to –90 dBm, resolution 0.1 dB Output power accuracy ±1 dB, 0 dBm to –80 dBm 5 Characteristic/Parameter Specification BLE measurements made in compliance with Bluetooth RF test specification Low Energy Measurements RF_PHY.TS/4.0.0 BLE Output power TRM-LE/CA/01/C and TRM-LE/CA/02/C DUT configured to transmit Test Reference Packets. Measurement configuration Packet payload: PRBS9 Average power Displayed results Peak to average power Number of measurement frequencies Three, default to RF Test Specification or user defined Measurement range +22 dBm to –50 dBm average power (+23 dBm peak power) Resolution 0.1 dB +20 dBm to -35 dBm, ±1.0 dB Accuracy +22 dBm to +20 dBm, ±1.5 dB BLE Modulation characteristics TRM-LE/CA/05/C DUT configured to transmit Test Reference Packets. Measurement configuration Packet payload: 11110000 and 10101010 Frequency deviation ∆f1max Displayed results ∆f2max ∆f1avg ∆f2avg, ∆f2avg / ∆f1 avg ratio, %∆f2max, > 185 kHz Number of measurement frequencies Three, default to RF Test Specification or user defined RF input: +20 dBm to -35 dBm Measurement range Deviation: 0 Hz to 500 kHz peak Resolution Deviation: 1 kHz Accuracy 1% for modulation index 0.5 BLE Carrier frequency offset and drift TRM-LE/CA/06/C and TRM-LE/CA/07/C DUT configured to transmit Test Reference Packets. Measurement configuration Packet payload: 10101010 Carrier frequency error Displayed results Frequency drift Drift rate Number of measurement frequencies Three, default to RF Test Specification or user defined RF input: +20 dBm to -35 dBm Measurement range Frequency: 500 kHz Frequency Resolution 1 kHz Accuracy 500 Hz ± Frequency standard BLE Receiver sensitivity RCV-LE/CA/01/C and RCV-LE/CA/02/C DUT configured to receive Test Reference Packets. Measurement configuration Packet payload: PRBS9 Full support of Dirty Transmitter as defined in test specification Displayed results Receiver PER. Requires DUT to support HCI UART or USB or 2-Wire interface for automated PER results. Number of measurement frequencies Three, default to RF Test Specification or user defined Output power range 0 dBm to –90 dBm, resolution 0.1 dB Output power accuracy ± 1 dB, 0 dBm to –80 dBm BLE Maximum input signal level RCV-LE/CA/06/C DUT configured to receive Test Reference Packets. Measurement configuration Packet payload: PRBS9 Displayed results Receiver PER. Requires DUT to support HCI UART or USB or 2-Wire interface for automated PER results. Number of measurement frequencies Three, default to RF Test Specification or user defined Output power range 0 dBm to –90 dBm, resolution 0.1 dB Output power accuracy ± 1 dB, 0 dBm to –80 dBm BLE PER report integrity RCV-LE/CA/07/C DUT configured to receive Test Reference Packets. Packet payload: PRBS9 Measurement configuration CRC corruption: Alternate packets Number of test packets: Random [100 ≤ RND ≤ 1500] Displayed results Receiver PER. Requires DUT to support HCI UART or USB or 2-Wire interface for automated PER results. Number of measurement frequencies One, default to RF Test Specification or user defined Output power range 0 dBm to –90 dBm, resolution 0.1 dB Output power accuracy ± 1 dBm (0 dBm to –80 dBm) 6 Characteristic/Parameter Specification MT8852B Signal Generator Frequency Frequency range 2.40 to 2.5 GHz Frequency resolution 1 kHz Frequency accuracy As frequency standard ±500 Hz Level Amplitude range 0 dBm to –90 dBm Amplitude accuracy ±1 dB (0 dBm to –80 dBm) Amplitude resolution ±0.1 dB Output impedance 50 Ω (nominal) 1.5:1 (typically 1.3) Output VSWR Adjacent channels 3 or higher –40 dBc GFSK modulation Modulation index Variable, 0.25 to 0.50 (125 kHz to 250 kHz) Modulation index resolution 0.01 Modulation index accuracy 1% for Modulation Index = 0.32 Baseband filter BT=0.5 π/4DQPSK modulation Modulation index accuracy <5% RMS DEVM Baseband filter BT=0.4 8DPSK modulation Modulation index accuracy <5% RMS DEVM Baseband filter BT=0.4 MT8852B Measuring Receiver Frequency Frequency range 2.40 to 2.5 GHz Frequency resolution 1 kHz Frequency accuracy As frequency standard ±500 Hz Level Range +22 dBm to –55 dBm average power Power measurement accuracy ±1 dB (+20 dBm to –35 dBm) Input VSWR 1.5:1 Damage level +25 dBm Resolution 0.1 dB GFSK modulation Deviation measurement range 0 to 350 kHz peak Accuracy 1% for Modulation Index = 0.32 EUT Control Interface The EUT control interface provides RS232 HCI commands to the EUT through a standard RS232 HCI commands RS-232 interface. The interface meets the requirements of the Bluetooth specification for HCI UART transport layer. A RS232 cable is supplied. The EUT control interface provides USB HCI commands to the EUT through a standard USB HCI commands USB interface. The interface meets the requirements of the Bluetooth specification section H:2. A USB cable is supplied. 2-Wire control For test control of Bluetooth low energy devices the EUT control interface supports the 2-Wire specification 7 Characteristic/Parameter Specification Audio Specifications Number of SCO channels supported 3 Codec air interfaces supported CVSD, A-Law, µ-Law (–3 dB) measured CODEC in to CODEC out: 160 Hz –3.5 kHz. Frequency response Measured with 50 Ω source impedance and 10 MΩ load impedance Maximum input / output signal level 3.4 V = 1.2V RMS pk-pk A law: typical –37 dB at 1 kHz, 1V RMS Distortion/noise µ law: typical –37 dB at 1 kHz, 1V RMS CVSD: typical –30 dB at 300 Hz, 1V RMS Input/Output connectors 3.5 mm audio jack plugs (one for each SCO channel) Input impedance 20 kΩ Minimum output load 600 Ω Internal audio source 1 kHz fixed frequency AFH (Option 15) Supported in ACL and SCO connections Displays Active channel vs. time, FER vs. time Other features ACL connection timer, resolution 1 ms Frequency Standard Frequency 10 MHz Temperature Stability ±0.5 ppm, –10 ºC to +85 ºC Aging (1st year) ±1.0 ppm Aging (over 10 years) ±2.5 ppm, including year 1 Rear Panel Connectors External frequency standard input Rear panel BNC socket, 50 Ω 1 volt Output 1 TTL output for TX ON, TX DATA, RX DATA, and correlator Output 2 TTL output for RX ON, TX DATA, RX DATA, and correlator Input 1 For service use only GPIB IEE 488.2 Offers full instrument control as standard RS232 RS232 Offers full instrument control as standard General Power supply 85 to 264 Volts AC Frequency 47 to 63 Hz Power 150 VA Max Environmental Operating temperature 5 to +40 ºC Operating humidity 20% to 75% Safety Complies with IEC 61010-1 EMC Conforms to the protection requirements of EEC Council Directive 89/336/EEC Size and Weight Dimensions 216.5 mm x 88 mm x 380 mm Weight <3.45 kg 8 Ordering Information Part number Description MT8852B Bluetooth Test Set with EDR and Audio MT8852B-040 Bluetooth Test Set with no EDR and no Audio MT8852B-041 Bluetooth Test Set with no EDR and with Audio MT8852B-042 Bluetooth Test Set with EDR and no Audio MT8852B-043 Bluetooth low energy measurements only Included accessories MT8852B operation manual MT8852B remote programming manual BlueSuite software (standard version) RS 232 HCI control interface lead USB HCI control interface lead RS 232 cable for firmware updates Power cord for destination country Certificate of calibration 3.5 mm jack plugs (qty 3) Audio versions only BlueTest2 software Options and accessories MT8852B-001 Rack mount kit, single unit MT8852B-003 Rack mount kit, side by side MT8852B-014 Headset and Hands-free profile emulator software MT8852B-015 Adaptive frequency hopping option MT8852B-017 IQ data output MT8852B-027 Bluetooth low energy measurements MT8852B-319 Retrofit Audio to MT8852B MT8852B-325 Retrofit EDR to MT8852B MT8852B-330 Retrofit Basic Rate measurements to MT8852B-043 MT8852B-098 Standard calibration to ANSI/NCSL Z540 MT8852B-099 Premium calibration to ANSI/NCSL Z540 (Test report and uncertainty data included) MX885201B BlueSuite Pro3 software application 2000-1613-R Bluetooth antenna and adaptor D41310 Soft carry bag 9 Notes 10 Notes 11 • Italy • India Anritsu Corporation 5-1-1 Onna, Atsugi-shi, Kanagawa, 243-8555 Japan Anritsu S.p.A. Anritsu Pte. Ltd. Phone: +81-46-223-1111 Via Elio Vittorini, 129, 00144 Roma, Italy India Branch Office Fax: +81-46-296-1264 Phone: +39-06-509-9711 3rd Floor, Shri Lakshminarayan Niwas, Fax: +39-06-502-2425 #2726, 80 ft Road, HAL 3rd Stage, Bangalore - 560 075, India • U.S.A. Phone: +91-80-4058-1300 Anritsu Company • Sweden Fax: +91-80-4058-1301 1155 East Collins Boulevard, Suite 100, Anritsu AB Richardson, Texas 75081 U.S.A. • P. R. China (Hong Kong) Borgafjordsgatan 13, 164 40 Kista, Sweden Toll Free: 1-800-ANRITSU (267-4878) Phone: +46-8-534-707-00 Anritsu Company Ltd. Phone: +1-972-644-1777 Fax: +46-8-534-707-30 Units 4 & 5, 28th Floor, Greenfield Tower, Concordia Plaza, Fax: +1-972-671-1877 No. 1 Science Museum Road, Tsim Sha Tsui East, • Finland • Canada Kowloon, Hong Kong, P.R. China Anritsu AB Phone: +852-2301-4980 Anritsu Electronics Ltd. Teknobulevardi 3-5, FI-01530 Vantaa, Finland Fax: +852-2301-3545 700 Silver Seven Road, Suite 120, Kanata, Phone: +358-20-741-8100 Ontario K2V 1C3, Canada • P. R. China (Beijing) Fax: +358-20-741-8111 Phone: +1-613-591-2003 Anritsu Company Ltd. • Denmark Fax: +1-613-591-1006 Beijing Representative Office Anritsu A/S (for Service Assurance) • Brazil Room 2008, Beijing Fortune Building, Anritsu AB (Denmark) (for Test & Anritsu Electrônica Ltda. No. 5 , Dong-San-Huan Bei Road, Measurement except Service Assurance) Chao-Yang District, Beijing 100004, P.R. China Praça Amadeu Amaral, 27 - 1 Andar Kirkebjerg Allé 90 DK-2605 Brøndby, Denmark Phone: +86-10-6590-9230 01327-010 - Bela Vista - São Paulo - SP - Brasil Phone: +45-7211-2200 Phone: +55-11-3283-2511 Fax: +86-10-6590-9235 Fax: +45-7211-2210 Fax: +55-11-3288-6940 • Korea • Russia • Mexico Anritsu Corporation, Ltd. Anritsu EMEA Ltd. Anritsu Company, S.A. de C.V. 8F Hyunjuk Bldg. 832-41, Yeoksam-Dong, Representation Office in Russia Kangnam-ku, Seoul, 135-080, Korea Av. Ejército Nacional No. 579 Piso 9, Col. Granada Tverskaya str. 16/2, bld. 1, 7th floor. Phone: +82-2-553-6603 11520 México, D.F., México Fax: +82-2-553-6604 Russia, 125009, Moscow Phone: +52-55-1101-2370 Phone: +7-495-363-1694 Fax: +52-55-5254-3147 • Australia Fax: +7-495-935-8962 • U.K. Anritsu Pty Ltd. • United Arab Emirates Unit 21/270 Ferntree Gully Road, Notting Hill Anritsu EMEA Ltd. Anritsu EMEA Ltd. Victoria, 3168, Australia 200 Capability Green, Luton, Bedfordshire LU1 3LU, U.K. Dubai Liaison Office Phone: +61-3-9558-8177 Phone: +44-1582-433280 Fax: +61-3-9558-8255 Fax: +44-1582-731303 P O Box 500413 - Dubai Internet City Al Thuraya Building, Tower 1, Suite 701, 7th Floor • Taiwan • France Dubai, United Arab Emirates Anritsu Company Inc. Anritsu S.A. Phone: +971-4-3670352 7F, No. 316, Sec. 1, Neihu Rd., Taipei 114, Taiwan 16/18 Avenue du Québec-SILIC 720 Fax: +971-4-3688460 Phone: +886-2-8751-1816 91961 COURTABOEUF CEDEX, France • Singapore Fax: +886-2-8751-1817 Phone: +33-1-60-92-15-50 Anritsu Pte. Ltd. Fax: +33-1-64-46-10-65 60 Alexandra Terrace, #02-08, The Comtech (Lobby A) • Germany Singapore 118502 Anritsu GmbH Phone: +65-6282-2400 Nemetschek Haus, Konrad-Zuse-Platz 1 Fax: +65-6282-2533 81829 München, Germany Phone: +49 (0) 89 442308-0 Fax: +49 (0) 89 442308-55 ® Anritsu All trademarks are registered trademarks of 11410-00541, Rev. A Printed in United States 2010-04 their respective companies. Data subject to change ©2010 Anritsu Company. All Rights Reserved without notice. For the most recent specifications visit: www.anritsu.com