Product Brochure
MP8931A
Bit Error Rate Tester
1 kHz to 155 MHz
The MP8931A Bit Error Rate Tester has digital broadcast interfaces (DVB-ASI, DVB-SPI) in addition to the general bit-error-
rate test function. It is suitable for quality evaluation at device production/construction and for maintenance after installation.
Features
Clock frequency: 1 kHz to 155 MHz
•
Pseudo-random (PN9/15/23) and ALL0/1, 1010 fixed pattern measurement
•
∗1
MP8931A includes conventional NRZ I/F (TTL-Clock/Data/Enable) as standard equipment, as well as DVB-ASI and
•
∗2
DVB-SPI , both of which are for digital broadcasting
Selectable error rate measurement part in an DVB I/F data packet is possible
•
Error insertion
•
GPIB/RS-232C I/F
•
Small design (Thin case)
•
1: DVB-ASI: Digital Video Broadcasting - Asynchronous Serial Interface
∗
2: DVB-SPI: Digital Video Broadcasting - Synchronous Parallel Interface
∗
MP8931A
Bit Error Rate Tester
1 kHz to 155 MHz
2 Product Brochure l MP8931A
Specifications
(1) Common Items
Item Specifications
Measurement Interface NRZ, DVB-SPI, DVB-ASI
Remote Control Interface GPIB, RS-232C
Internal Clock Frequency Setting Setting range: 1 kHz to 155 MHz, Resolution: 1 Hz, Accuracy: ±10 ppm
Pseudo-random code: PN9, PN9_REV, PN15, PN15_REV, PN23, PN23_REV, ALL“0”, ALL“1”, “1010”
Synchronization establish condition:
Transmission/Measurement Pattern • NRZ: 50 bits +N bits (N: Number of stages, “0” when fixed), when normal
• DVB-SPI, SVB-ASI: 8 × (8 + N) bits, when normal
Synchronization loss condition: when 6 error bits of 64 bits detected
–2 –3 –4 –5 –6 –7
Error Addition Manual, Continuous (10 , 10 , 10 , 10 , 10 , 10 )
Measurement time (000h00m01s00 to 999h59m59s90)
3 15
Measurement Time/Number of Bits Number of measurement bits (10 to 10 )
Repeat
AutoSync On, Off
Burst Disable, Enable
Status Indicator LED Counting, Sync Loss, Signal Loss, Errors
[1] Switch between “Error rate” and “Number of errors/total count”
[2] Over Flow display
Screen Display [3] Error display
[4] Passed (elapsed) time/left (remaining) time display
[5] Current/Last display
Screen display Off: None or 1, 5, 10, 20, 30, 40, 50, 60 min
Display Screen Control
Brightness adjustment: 25, 50, 75, 100%
Auto Save of Setting Data Saves the set parameters just before power-off and sets them automatically at the next power-on
Voltage: 85 to 250 V (ac)
Power Supply
Frequency: 47.5 Hz to 63 Hz
Power Consumption ≤50 VA
Operating Temperature/Humidity 0° to 50°C, ≤80% (Non condensing)
Dimensions 426 (W) × 88 (H) × 451 (D) mm, excluding protrusions
Mass ≤7 kg
Product Brochure l MP8931A 3
(2) NRZ Interface
Item Specifications
Common (I/O) Connector BNC (75 Ω)
Signal Type Data/Clock
High: –0.9 ±0.2 V, Low: –1.7 ±0.2 V
Level
High: +2.5 ±0.3 V, Low: 0 ±0.3 V
Termination Voltage Conditions ECL: –2 V, TTL: GND
Termination Fixed to 75 Ω
Data: Positive, Negative
Clock: Rise, Fall
Common to
Data/Clock
Polarity Switching
Enable/Disable Enable/Disable (fixed to Low) setting
Bit Rate 1 kHz to 155 MHz, Resolution: 1 Hz
Data Waveform NRZ
Tr/Tf (20 to 80%) ECL: ≤1 ns, TTL: ≤1.5 ns
1 kHz to 155 MHz, Resolution: 1 Hz
Frequency
Accuracy: ±10 ppm
Output Signal
Duty 50% ±10%
Tr/Tf (20 to 80%) ECL: ≤1 ns, TTL: ≤1.5 ns
Clock
Output Phase
4 Product Brochure l MP8931A
Item Specifications
Signal Type Data/Clock/Enable
High: 0 to –1.0 V, Low: –1.5 V to –2.5 V
Level High: +1.8 V to +5.0 V, Low: 0 to +1.0 V
Shown below
ECL: –2 V, TTL: GND
Termination Voltage Conditions Variable: –2.5 V to +3.3 V (user-defined)
Resolution: 0.1 V
ECL: –1.3 V, TTL: +1.4 V
Threshold Voltage Conditions Variable: –2 V to +3 V (user-defined)
Resolution: 0.1 V
Common to
Termination 75 Ω/1 MΩ
Data/Clock Enable
Data: Positive, Negative
Clock: Rise, Fall
Enable: Positive, Negative, Off
Polarity Switching
Input Signal
Data/Enable Waveform NRZ
Frequency 1 kHz to 155 MHz, Accuracy: ±100 ppm
Duty 50 ±10%
Pulse Width ≥3 ns
Clock
Input Phase
Product Brochure l MP8931A 5
(3) DVB-SPI interface
Item Specifications
D_Sub 25 (Female)
Table: Pin Contact Assignment
Pin Signal Pin Signal Pin Signal
1 Clock A 10 Data 0 A 18 Data 5 B
2 System GND 11 DVALID A 19 Data 4 B
3 Data 7 A (MSB) 12 PSYNC A 20 Data 3 B
4 Data 6 A 13 Cable shield 21 Data 2 B
Connector
5 Data 5 A 14 Clock B 22 Data 1 B
6 Data 4 A 15 System GND 23 Data 0 B
7 Data 3 A 16 Data 7 B (MSB) 24 DVALID B
8 Data 2 A 17 Data 6 B 25 PSYNC B
Common (I/O)
9 Data 1 A
Logical conversion
1: Voltage of A is higher than that of B
0: Voltage of A is lower than that of B
Termination 100 Ω
Signal Type Data [7:0], Clock, Dvalid, Psync
[1] 204: (1) +187 + (16) packets
[2] 188: (1) +187 packets
[3] 204: (1+3) +184 + (16) packets
Packet Type
[4] 188: (1+3) +184 packets
[5] 204: (1) + 203 packets
[6] 204: (1+3) + 200 packets
Offset Voltage: 1.125 V to 1.35 V
Level (LVDS)
Common to Clock,
Differential Output Voltage: 247 mV to 454 mV
Data DVALID,
Tr/Tf (20 to 80%) ≤T/7
PSYNC
Enable/Disable Enable/Disable (fixed to Low) setting
“Sync”: 47 h (fixed)
Data Data Out of PN Range
“16 Valid extra bytes”, “PID”: ALL1 (fixed)
DVALID Level Fixed to “High”
Frequency 10 kHz to 13.5 MHz, Resolution: 1 Hz
Duty 50 ±10%
Output Signal
Clock (Byte clock)
Output Phase
Common to Clock,
Data DVALID, Level (LVDS) 0.1 Vp-p to 2.0 Vp-p
PSYNC
Data Data Out of PN Range Data are not compared for “Sync,” “16 Valid extra bytes” or “PID”
Frequency 10 kHz to 13.5 MHz
Duty 50 ±10%
Input Signal
Clock (Byte clock)
Input Phase
Monitor Output Enable/Disable (high-impedance) setting
: An external clock (byte clock) can be used when this interface is selected.
∗
6 Product Brochure l MP8931A
Timing
[1] When 187 bytes of 204-byte packet are measurement target: (1) + 187 + (16)
[2] When 187 bytes of 188-byte packet are measurement target: (1) + 187
[3] When 184 bytes of 204-byte packet are measurement target: (1+3) + 184 + (16)
[4] When 184 bytes of 188-byte packet are measurement target: (1+3) + 184
[5] When 203 bytes of 204-byte packet are measurement target: (1) + 203
[6] When 200 bytes of 204-byte packet are measurement target: (1+3) + 200
Product Brochure l MP8931A 7
(4) DVB-ASI Interface
Item Specifications
Connector BNC (75 Ω)
Termination 75 Ω
Frequency 270 MHz (Internal clock)
[1] 204: (1) + 187 + (16) packets
Common (I/O)
[2] 188: (1) + 187 packets
[3] 204: (1+3) + 184 + (16) packets
Packet Type
[4] 188: (1+3) + 184 packets
[5] 204: (1) + 203 packets
[6] 204: (1+3) + 200 packets
Level 800 mVp-p ±10%
Tr/Tf (20 to 80%) ≤1.2 ns
Line Rate 270 Mbaud ±100 ppm
“Sync”: 47 h (fixed)
Data Out of PN Range
Output “16 Valid extra bytes,” “PID”: ALL1 (fixed)
Output Mode Packet mode
1 MHz to 27 MHz, Resolution: 1 MHz
Data Rate
When set to 27 MHz: Two “Stuffing Data” are inserted between packets
Enable/Disable Enable/Disable (fixed to Low) setting
Min. Sensitivity: 200 mV
Level
Max. Input Voltage: 880 mV
Impedance 75 Ω
Input
Parity Check (except “Sync”) Data is not compared for “16 Valid extra bytes” and “PID”
Frame Sync Establishment Conditions “Sync” (47 h) detection, successively for three frames
Frame Sync Loss Conditions None (ignored)
Monitor Output Enable/Disable (High impedance) setting
(5) External Clock Input
Item Specifications
High: 0 to −1.0 V, Low: −1.5 V to −2.5 V
Level
High: +1.8 V to +5.0 V, Low: 0 to +1.0 V
Terminal Voltage Conditions ECL: −2 V, TTL: GND
Threshold Voltage Conditions ECL: −1.3 V, TTL: +1.4 V
Termination 75 Ω/1 MΩ
ECL: 1 kHz to 155 MHz, TTL: 1 kHz to 100 MHz
Frequency
Accuracy: ±100 ppm
Duty 50 ±10%
Pulse Width ≥3 ns
8 Product Brochure l MP8931A
Ordering information
Please specify the model/order number, name and quantity when ordering.
The names listed in the chart below are Order Names. The actual name of the item may differ from the Order Name.
Model/Order No Name
Main frame
MP8931A Bit Error Rate Tester
Standard accessories
Power Cord: 1 pc
F0012 Fuse, 3.15 A: 1 pc
W2249AE MP8931A Operation Manual: 1 copy
Optional parts
B0329A Front Cover for 1MW 2U (Protective Cover)
J1011 D-Sub 25 Cable
J0026A Coaxial Cord, 1 m
J0007 408JE-104, GPIB Cable (1 m)
J0008 GPIB Cable, 2 m (408JE-102)
J1256A RS-232C Cable (1.5 m)
Product Brochure l MP8931A 9
Specifications are subject to change without notice.
Anritsu Corporation Italy India
• •
5-1-1 Onna, Atsugi-shi, Kanagawa, 243-8555 Japan
Anritsu S.r.l. Anritsu Pte. Ltd.
Phone: +81-46-223-1111
Via Elio Vittorini 129, 00144 Roma, Italy
India Branch Office
Fax: +81-46-296-1238
Phone: +39-6-509-9711
3rd Floor, Shri Lakshminarayan Niwas, #2726, 80 ft Road,
Fax: +39-6-502-2425
HAL 3rd Stage, Bangalore - 560 075, India
U.S.A.
•
Phone: +91-80-4058-1300
Anritsu Company Sweden
•
Fax: +91-80-4058-1301
1155 East Collins Blvd., Suite 100, Richardson,
Anritsu AB
TX 75081, U.S.A.
Borgafjordsgatan 13, 164 40 KISTA, Sweden P.R. China (Hong Kong)
•
Toll Free: 1-800-267-4878
Phone: +46-8-534-707-00
Anritsu Company Ltd.
Phone: +1-972-644-1777
Fax: +46-8-534-707-30
Units 4 & 5, 28th Floor, Greenfield Tower, Concordia Plaza,
Fax: +1-972-671-1877
No. 1 Science Museum Road, Tsim Sha Tsui East,
Finland
•
Kowloon, Hong Kong
Canada
•
Anritsu AB
Phone: +852-2301-4980
Anritsu Electronics Ltd.
Teknobulevardi 3-5, FI-01530 VANTAA, Finland
Fax: +852-2301-3545
700 Silver Seven Road, Suite 120, Kanata,
Phone: +358-20-741-8100
Ontario K2V 1C3, Canada
Fax: +358-20-741-8111 P.R. China (Beijing)
•
Phone: +1-613-591-2003
Anritsu Company Ltd.
Fax: +1-613-591-1006 Denmark
•
Beijing Representative Office
Anritsu A/S (Service Assurance)
Brazil
• Room 2008, Beijing Fortune Building,
Anritsu AB (Test & Measurement)
No. 5, Dong-San-Huan Bei Road,
Anritsu Eletrônica Ltda.
Kirkebjerg Allé 90, DK-2605 Brøndby, Denmark
Chao-Yang District, Beijing 100004, P.R. China
Praça Amadeu Amaral, 27 - 1 Andar
Phone: +45-7211-2200
Phone: +86-10-6590-9230
01327-010 - Bela Vista - São Paulo - SP - Brasil
Fax: +45-7211-2210
Fax: +86-10-6590-9235
Phone: +55-11-3283-2511
Fax: +55-11-3288-6940
Russia
•
Korea
•
Anritsu EMEA Ltd.
Mexico
• Anritsu Corporation, Ltd.
Representation Office in Russia 8F Hyunjuk Building, 832-41, Yeoksam Dong,
Anritsu Company, S.A. de C.V.
Tverskaya str. 16/2, bld. 1, 7th floor. Kangnam-ku, Seoul, 135-080, Korea
Av. Ejército Nacional No. 579 Piso 9, Col. Granada
Russia, 125009, Moscow Phone: +82-2-553-6603
11520 México, D.F., México
Phone: +7-495-363-1694 Fax: +82-2-553-6604
Phone: +52-55-1101-2370
Fax: +7-495-935-8962
Fax: +52-55-5254-3147
Australia
•
United Arab Emirates
U.K. •
• Anritsu Pty. Ltd.
Anritsu EMEA Ltd. Unit 21/270 Ferntree Gully Road, Notting Hill,
Anritsu EMEA Ltd.
Victoria 3168, Australia
200 Capability Green, Luton, Bedfordshire, LU1 3LU, U.K.
Dubai Liaison Office
Phone: +61-3-9558-8177
Phone: +44-1582-433200
P O Box 500413 - Dubai Internet City
Fax: +61-3-9558-8255
Fax: +44-1582-731303
Al Thuraya Building, Tower 1, Suit 701, 7th Floor
Dubai, United Arab Emirates
Taiwan
France •
•
Phone: +971-4-3670352
Anritsu Company Inc.
Anritsu S.A.
Fax: +971-4-3688460
7F, No. 316, Sec. 1, Neihu Rd., Taipei 114, Taiwan
12 avenue du Québec, Bâtiment Iris 1- Silic 612,
Singapore Phone: +886-2-8751-1816
91140 VILLEBON SUR YVETTE, France •
Fax: +886-2-8751-1817
Phone: +33-1-60-92-15-50
Anritsu Pte. Ltd.
Fax: +33-1-64-46-10-65
60 Alexandra Terrace, #02-08, The Comtech (Lobby A)
Singapore 118502
Germany
•
Phone: +65-6282-2400
Anritsu GmbH
Fax: +65-6282-2533
Nemetschek Haus, Konrad-Zuse-Platz 1
81829 München, Germany
Phone: +49-89-442308-0
Fax: +49-89-442308-55
1010
Please Contact:
Printed on Recycled Paper
Catalog No. MP8931A-E-A-1-(1.00) Printed in Japan 15/DEC/2010 ddch/CDT
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods