Product Specifications 240PQMR-C-CR   QMA Male Right Angle for CNT­240 braided cable     General Specifications Interface  QMA Male  Body Style  Right angle  Brand  CNT®     Electrical Specifications Operating Frequency Band  0 – 6000 MHz  Cable Impedance  50 ohm  Connector Impedance  50 ohm  RF Operating Voltage, maximum (vrms)  500.00 V  dc Test Voltage  1000 V  Outer Contact Resistance, maximum  2.50 mOhm  Inner Contact Resistance, maximum  3.00 mOhm  Insulation Resistance, minimum  5000 MOhm  Average Power  260.0 W @ 900 MHz  Peak Power, maximum  5.00 kW  Insertion Loss, typical  0.05 dB  ©2012 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 1 of 3 April 28, 2012 All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 23, 2012 Product Specifications 240PQMR-C-CR Outline Drawing             Mechanical Specifications Outer Contact Plating  Unplated  Inner Contact Plating  Gold  Outer Contact Attachment Method  Crimp  Inner Contact Attachment Method  Captivated  Interface Durability  100 cycles  Interface Durability Method  IEC 61169­15:9.5  Connector Retention Tensile Force  134 N   |   30 lbf  Connector Retention Torque  0.23 N­m   |   0.17 ft lb  Insertion Force  22.00 N   |   4.95 lbf  Insertion Force Method  IEC 61169­15:9.3.5  Pressurizable  No     Dimensions Nominal Size  0.240 in  Height  23.25 mm   |   0.92 in  Length  19.71 mm   |   0.78 in  Weight  8.96 g   |   0.02 lb  Width  10.50 mm   |   0.41 in     Environmental Specifications Operating Temperature  ­40 °C to +85 °C (­40 °F to +185 °F)  Storage Temperature  ­65 °C to +125 °C (­85 °F to +257 °F)  Water Jetting Test Mating  Mated  Water Jetting Test Method  IEC 60529:2001, IP65  ©2012 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 2 of 3 April 28, 2012 All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 23, 2012 Product Specifications 240PQMR-C-CR Mechanical Shock Test Method  IEC 60068­2­27  Climatic Sequence Test Method  IEC 60068­1  Damp Heat Steady State Test Method  IEC 60068­2­3  Thermal Shock Test Method  IEC 60068­2­14  Vibration Test Method  IEC 60068­2­6  Corrosion Test Method  IEC 60068­2­11     Standard Conditions Attenuation, Ambient Temperature  20 °C   |   68 °F  Average Power, Ambient Temperature  40 °C   |   104 °F  Average Power, Inner Conductor Temperature 100 °C   |   212 °F  Return Loss/VSWR Frequency Band VSWR Return Loss (dB) 0–3000 MHz 1.07 29.10 3000–6000 MHz 1.13 24.00 Regulatory Compliance/Certifications Agency Classification RoHS 2002/95/EC Compliant by Exemption China RoHS SJ/T 11364­2006 Above Maximum Concentration Value (MCV) ISO 9001:2008 Designed, manufactured and/or distributed under this quality management system     * Footnotes Insertion Loss, typical  0.05√¯freq (GHz) (not applicable for elliptical waveguide)  ©2012 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. page 3 of 3 April 28, 2012 All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: April 23, 2012