AMPRO LB3-P5i

Description
AMPRO LB3-P5I Series Little Board Intel Pentium 100 MHz, 133 MHz VRT, 166 MHz w/4x COM, 4x PCI EIDE, Ultra SCSI, VGA/CRT/LCD/EL, 10Base-T LAN, 128MB DRAM, PC/104+
Part Number
LB3-P5i
Price
Request Quote
Manufacturer
AMPRO
Lead Time
Request Quote
Category
SINGLE BOARD COMPUTERS » PC/104
Specifications
BIOS
Award ROM-BIOS with Ampro enhancements (See Ampro Embedded-PC Enhancements section)
Board Type
EBX (5.25 in)
Bytewide Socket
Usable with 32K-1M byte EPROMs, 32K-512K byte Flash EPROMs, 32K-512K byte SRAMs,
CONFIG EEPROM
Supports battery-free boot capability; 512 bits available for OEM use
CPU
Intel Pentium®, 100 MHz, 133 MHz VRT, 166 MHz
Data Rate
10M bits/sec
Dimensions
5.75 x 8.0 x 1.2 in. (146 x 203 x 30mm)
Display Controller
Supports CRT, LCD, and EL displays; C&T 65545
DMA Internal
15 interrupt channels (8259 equivalent); 7 DMA channels (8237 equivalent); 3 programmable counter/timers (8254 equivalent)
Ethernet Controller
Complies with IEEE-802.3 (ANSI 8802-3); SMC 9000 series
Flat Panel Support
Supports 24-bit “true color” (640 x 480); “GUI accelerator” for enhanced graphic function performance; Software programmable flat panel interface signal timing; Sequenced LCD power to protect display; Supports DPMS-compatible displays; Optional plug-in LCD bias supply - supplies ±15 to ±35 VDC @ 30 mA; voltage level adjusted via onboard or external potentiometer
Floppy Disk Drive
Supports 1 or 2 drives
Humididty
5% to 95% relative humidity, non-condensing
Keyboard
Standard PC/AT keyboard port; Speaker port with 0.1 watt output
L2 Cache
256K level two cache
Media Interface Options
10Base-T (twisted pair), via onboard RJ45 connector; AUI, via onboard header connector; DB15F transition cable available; 10Base2 (thin coax), via external MAU connected to AUI interface
On-Board Display RAM
1 MByte
Operating Temperature
(Please refer to the Ampro Ordering Guide.)
Parallel Port
EPP/ECP compatible, bidirectional
PCI Enhanced IDE
Supports up to four drives; Supports “fast” IDE data transfer modes
PCI UltraSCSI
Adaptec AIC-7860; Supports SCSI I/II, “UltraSCSI” (20MB/sec), synchronous or asynchronous transfers
Power Requirements
Contact factory
PowerFail NMI
Triggers when +5V power drops below +4.7V
Processor
Intel Pentium 166MHz
Real Time Clock
Battery backed real-time clock and CMOS setup
Remot Boot ROM
Can be installed in byte-wide SSD socket
Serial Port
Four FIFO-buffered serial ports with full handshaking (16550 equivalent); Each channel supports either RS232C (direct connection) or RS485 (via the Ampro RS485 Adapter)
Storage Temperature
–55° C to +85° C
System Memory
Supports up to 128 Mbytes, Fast Page or EDO DRAM; Supports two 72-pin SIMMs (1 bank) with or without parity; Shadow RAM support provides fast system/video BIOS execution
Watchdog Timer
Utilizes real time clock alarm function; Timeout triggers NMI or hardware reset
Weight
11.6 oz. (329 gm)
Features
- ETHERNET CONTROLLER
- Floppy Disk Drive
- Four COM Ports
- INTEL PENTIUM® 100 MHZ, 133 MHZ VRT, 166 MHZ
- PC/104-Plus PCI CONNECTOR & PC/104-Plus ISA CONNECTOR
- SCSI CONTROLLER
- SCSI INTERFACE
- Two EIDE Ports
- UP TO 128 MBYTES DRAM
Datasheet
Extracted Text
Depopulated Depopulated Versions Available! Versions Available! LB3-P5i ™ Little Board /P5i • Exceptional performance, high integration EBX compliant single board system PC/104-Plus PCI CONNECTOR ETHERNET CONTROLLER SCSI CONTROLLER RJ45 ETHERNET CONNECTOR UP TO 128 MBYTES DRAM AUI CONNECTOR POWER CONNECTOR FLAT PANEL CONNECTOR SERIAL PORT 1 & 2 C&T 65545 SCSI INTERFACE VIDEO CONTROLLER PC VIDEO INPUT PRIMARY IDE CONNECTOR CRT CONNECTOR SECONDARY IDE CONNECTOR SERIAL PORT 3 & 4 FLOPPY INTERFACE ® INTEL PENTIUM 100 MHZ, 133 MHZ VRT, UTILITY CONNECTOR 166 MHZ PARALLEL CONNECTOR CPU POWER SUPPLY PC/104-Plus ISA CONNECTOR BYTEWIDE SOCKET The Little Board/P5i sets the standard for Pentium- based embedded-PC designs. The extreme power of an Intel Pentium CPU is combined with the high HIGH PERFORMANCE AND RELIABILITY bandwidth of a PCI expansion bus, in a rugged and reliable single-board solution for embedded The Little Board/P5i meets the performance applications that demand small size, low power and reliability demands of a wide range of fixed, consumption, and high functionality. mobile, and portable embedded applications. Compact size, reduced power consumption, This high-end member of the popular Ampro wide operating temperature, high quality, “third generation” Little Board family contains— and rugged construction all make the Little on a single compact assembly— all the functions of a fully configured PC-compatible system. Board/P5i the optimal choice for use in Included in this highly integrated design are disk, punishing embedded environments. display, network, and SCSI controllers, plus four serial ports and an enhanced parallel port. Ampro Computers, Inc. • 4757 Hellyer Ave., San Jose, CA 95138 • Tel. (408)360-0200 • Fax (408)360-0222 • sales@ampro.com SPECIFICATIONS FOR A COMPLETE LIST OF LB3-P5i ® CPU Intel Pentium , 100 MHz, 133 MHz VRT, 166 MHz • PANELS SUPPORTED, PC FUNCTIONS 256K level two cache • PLEASE VISIT OUR WEBSITE MEMORY Supports up to 128 Mbytes, Fast Page or EDO DRAM • www.ampro.com/support Supports two 72-pin SIMMs (1 bank) with or without parity • Shadow RAM support provides fast system/video BIOS execution • DMA INTERNAL 15 interrupt channels (8259 equivalent) • 7 DMA channels (8237 equivalent) • 3 programmable counter/timers (8254 equivalent) • KEYBOARD Standard PC/AT keyboard port • Speaker port with 0.1 watt output • REAL TIME CLOCK Battery backed real-time clock and CMOS setup • BIOS Award ROM-BIOS with Ampro enhancements (See Ampro Embedded-PC Enhancements section) • ADDITIONAL ONBOARD FUNCTIONS SERIAL Four FIFO-buffered serial ports with full handshaking (16550 equivalent) • Each channel supports either RS232C (direct connection) or RS485 (via the Ampro RS485 Adapter) • PARALLEL EPP/ECP compatible, bidirectional • FLOPPY Supports 1 or 2 drives • PCI ENHANCED IDE Supports up to four drives • Supports “fast” IDE data transfer modes • PCI ULTRASCSI Adaptec AIC-7860 • Supports SCSI I/II, “UltraSCSI” (20MB/sec), synchronous or asynchronous transfers • BYTEWIDE SOCKET Usable with 32K-1M byte EPROMs, 32K-512K byte Flash EPROMs, 32K-512K byte SRAMs, • or 32K-512K byte NOVRAMs Offboard battery converts SRAM into NOVRAM • Usable with DiskOnChip2000™ read/write device • CONFIG EEPROM Supports battery-free boot capability • 512 bits available for OEM use • WATCHDOG TIMER Utilizes real time clock alarm function • Timeout triggers NMI or hardware reset • POWERFAIL NMI • Triggers when +5V power drops below +4.7V PCI DISPLAY CONTROLLER Supports CRT, LCD, and EL displays • C&T 65545 CONTROLLER • ONBOARD DISPLAY RAM 1 MByte • FLAT PANEL SUPPORT Supports 24-bit “true color” (640 x 480) • “GUI accelerator” for enhanced graphic function performance • Software programmable flat panel interface signal timing • Sequenced LCD power to protect display • • Supports DPMS-compatible displays Optional plug-in LCD bias supply: supplies ±15 to ±35 VDC @ 30 mA; voltage level adjusted via onboard or • external potentiometer ETHERNET LAN INTERFACE Complies with IEEE-802.3 (ANSI 8802-3) • SMC 9000 series CONTROLLER • 10Base-T (twisted pair), via onboard RJ45 connector MEDIA INTERFACE OPTIONS • AUI, via onboard header connector; DB15F transition cable available • For ordering information 10Base2 (thin coax), via external MAU connected to AUI interface • and pricing please refer 10M bits/sec DATA RATE • to Ampro Ordering Can be installed in byte-wide SSD socket REMOTE BOOT ROM • Guide. MECHANICAL SIZE 5.75 x 8.0 x 1.2 in. (146 x 203 x 30 mm) • POWER Power requirements: Contact factory • ENVIRONMENTAL Operating temperature (Please refer to the Ampro Ordering Guide.) • 5% to 95% relative humidity, non-condensing • Storage temperature: –55° C to +85° C • Weight: 11.6 oz. (329 gm) • NOTE: Contact Ampro regarding custom configurations and special order options. NOTICE: The product specifications provided in this data sheet are subject to change without notice. © 1998 Ampro Computers, Inc. All rights reserved. AMPRO is a registered trademark and CoreModule, MiniModule, Little Board, and The Embedded Solutions Provider are trademarks of Ampro Computers, Inc. All other trademarks and registered trademarks are the property of their respective owners. THE EMBEDDED SOLUTIONS PROVIDER™ Ampro Headquarters: 1 (800)966-5200 • www.ampro.com
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the LB3-P5i have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

CoreModule™ 410 486 PC/104 Single Board Computer Rugged, Low Cost, RoHS-Compliant. 133MHz STPC Elite...

Ampro CM3-800-L-00 CPU Board . 800MHz 0kB Cache QuickStart Kit (R-00 SBC, 512MB RAM, Cable Kit, Soft...

Ampro CM3-800-L-10 CPU Board. 1GHz 512kB Cache QuickStart Kit(R-10 SBC, 512MB RAM, Cable Kit, Softwa...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods