LB3-CHS ™ Little Board Development Platforms • Quick Start self-hosted development system TWO-SLOT PCI AND TWO-SLOT PC/AT EXPANSION BUS BACKPLANE FOR INITIAL DEVELOPMENT (AVAILABLE WITH PC/104 AND PC/104-Plus LB3-CHS-K-71/ 72 VERSIONS) EXPANSION (NOT SHOWN— FOR LB3-CHS-K-73 /74 DEVELOPMENT PLATFORMS: TWO-SLOT ISA EXPANSION BUS BACKPLANE) LITTLE BOARD (SOLD SEPARATELY) 1 G BYTE IDE HARD DRIVE PREFORMATTED AND LOADED WITH MS DOS INTEGRATED SOLID STATE DISK BENCHTOP CHASSIS SOFTWARE 1.44M FLOPPY DRIVE SPARE 5.25” DRIVE BAY LOCATION FOR CD ROM OR OTHER DRIVES The Little Board Development Platform provide cables and I/O connectors are also included. Just an integrated and easy to use self-hosted plug in a keyboard and monitor, connect to an AC development environment that lets you maximize power outlet, and boot the operating system! the benefit of using Ampro’s off-the-shelf PC- There are two platform configurations available. compatible modules as the basis of your The LB3-CHS-K-71/72 provides a PC/104-Plus embedded system design. The development expansion location so you can install additional platforms provide everything you need to get PC/104-Plus and PC/104 modules. Or, you can started “right out-of-the-box”— even a licensed add conventional PCI and PC/AT bus plug-in cards copy of DOS so you can boot up and start by installing them in the system’s and PC/AT developing immediately. expansion slots. The LB3-CHS-K-73/74 offers The platform’s open-frame benchtop chassis PC/104 expansion plus two slots for standard makes both software and hardware development PC/AT plug-in cards. convenient and reliable: a floppy drive accepts Each Little Board development platform is tailored 1.44M diskettes; an IDE hard drive provides plenty to match your application’s requirements. When of storage for applications and data; a convenient ordering, specify the Little Board and development spare drive bay location is available for adding CD platform of your choice. ROM or other drives; a high quality DC power supply easily powers all the basic system modules plus your application-specific circuitry; all required Ampro Computers, Inc. • 4757 Hellyer Ave., San Jose, CA 95138 • Tel. (408)360-0200 • Fax (408)360-0222 • sales@ampro.com SPECIFICATIONS LB3-CHS MECHANICAL SIZE 13 x 10 x 6 in. (330 x 254 x 152 mm) • POWER • Supply outputs: — +5V ≥ 18A — -5V ≥ 0.3A — +12V ≥ 4A — -12V ≥ 0.3A TOTAL POWER Output: ≥ 140 W • 110 or 220 VAC at 50 - 60 Hz INPUT VOLTAGE • IDE DISK DRIVE > 1 GB • FLOPPY DISK DRIVE 3.5 inch, 1.44 MB • ENVIRONMENTAL +10° to +45° C temperature • 10% to 85% relative humidity, non-condensing • • Storage temperature: -40° to +60° C Weight: 11.7 pounds (332 gm) • LB3-CHS-K-71/72 versions Designed for use with Little Board/P5x, Little Board/P5e, Little Board/P5i • PC/104-Plus EXPANSION One expansion stack location can stack multiple modules together • Compatible with PC/104-Plus bus • Compatible with PC/104 Version 2 bus • Two expansion slots compatible with 32-bit PCI expansion boards PCI-ISA BACKPLANE • Two expansion slots compatible with 16-bit ISA expansion boards • Provides PC/104-style “AC termination” • LB2-CHS-K-73/74 versions Designed for use with Little Board/486i • One expansion stack location PC/104 EXPANSION • Compatible with PC/104 Version 2 bus • Two expansion slots compatible with 16-bit ISA expansion boards ISA BACKPLANE • Provides PC/104-style “AC termination” • For ordering information and pricing please refer to Ampro Ordering Guide. NOTICE: The product specifications provided in this data sheet are subject to change without notice. © 1998 Ampro Computers, Inc. All rights reserved. AMPRO is a registered trademark and CoreModule, MiniModule, Little Board, and The Embedded Solutions Provider are trademarks of Ampro Computers, Inc. All other trademarks and registered trademarks are the property of their respective owners. THE EMBEDDED SOLUTIONS PROVIDER™ Ampro Headquarters: 1 (800)966-5200 • www.ampro.com