AMPRO EnCore 700
Specifications
BIOS
System and Video BIOS with Ampro extensions in 512KB Flash device programmable on
Bus Interface
32-bit, 33MHz PCI 2.1-compliant bus supports
Chipset
Intel 82815EM
Configuration EEPROM
Supports batteryless boot capability
CPU
Thermal Management
Memory
100MHz, 3.3V PC100 SDRAM
Processor
Intel Celeron
Real Time Clock
With CMOS setup; onboard replaceable battery provided
System Controllers
PC/AT compatible
Features
- (4) USB, IrDA, Mouse/Keyboard, AC97 Sound
- 10/100BaseT Ethernet Interface
- 100x145mm (3.94x5.70") form factor
- 16-512MB SODIMM SDRAM
- 2D/3D CRT and TFT Flat Panel Interface
- 33MHz PCI Bus Interface
- Choice of 850MHz Intel Low Power Pentium III or 300MHZ Low Power Celeron Processors
- EIDE (2) Drive Interface, ATAPI including DVD
- High Integration Intel 815em Chipset
- Operating Temperature: Pentium III - 0° to 50°C standard; -40° to +75°C extended. Celeron - 0° to 70°C standard and -40° to +85°C extended without a fan
- Two Serial ports, Floppy, ECP/EPP Parallel port
Datasheet
EnCore 700.pdf
164 KiB
Extracted Text
ENC 700 ™ EnCore 700 Embedded Processor ® ™ High-integration, high-performance, Pentium III- or Celeron -based embedded processor FEATURES ® • 850MHz Intel Low Power Pentium III or 300MHz Low Power Celeron Processors • High Integration Intel 815EM Chipset • 16-512MB SODIMM SDRAM • 33MHz PCI Bus interface • EIDE (2) drive interface,ATAPI including DVD • Two Serial ports, Floppy, ECP/EPP Parallel port • (4) USB, IrDA, PS/2 Keyboard/Mouse, AC97 Sound • 10/100BaseT Ethernet interface • 2D/3D CRT and TFT Flat Panel interface ™ The EnCore 700 embedded processor is an ultra high performance EnCore module with embedded features for today’s demanding environments. It is a high-integration Intel-based CPU designed to plug into your application- ® ™ specific logic board. Based on a choice of 850MHz Low Power Pentium III or 300MHz Low Power Celeron processors, the EnCore 700 gives you a powerful and complete embedded CPU subsystem in a 100x145mm format. EnCore 700 with the Celeron CPU operates without a fan at both standard and extended operating temperature range of –40° to +85°C. Each EnCore 700 incorporates the new Intel 815em chipset and provides two serial ports, EPP/ECP parallel port, four USB UHCI ports, PS/2 keyboard and mouse interfaces, floppy and Ultra/DMA 33/66/100 IDE controllers, 10/100BaseT Ethernet interface and an AC97 audio interface. EnCore 700 supports up to 512MB SODIMM SDRAM, and interfaces to your application-specific logic board using a 33MHz PCI bus. EnCore 700 also includes a 2D/3D graphics controller which provides both CRT, DFP and TFT flat panel video interfaces. The EnCore 700 QuickStart Kit includes a baseboard reference design, sample baseboard and board support packages for popular operating systems. Finally, the EnCore 700 meets the high quality standard and ruggedized environment, including extended temperature specifications that you would expect from the inventor of PC/104 and EBX standards. Ampro Computers, Inc. 5215 Hellyer Ave., Ste. 110, San Jose, CA 95138 Tel. 408.360.0200 Fax 408.360.0222 sales@ampro.com www.ampro.com ENC 700 Processor Video Interface • 850MHz Low Power Pentium III or 300MHz Low • Controller – Integrated 82815EM with Intel 82807AA Power Celeron Processors VCH flat panel interface • 64-bit single-cycle 2D/3D graphics engine • CPU Thermal Management • 4MB UMA Frame Buffer • Chipset – Intel 82815EM • CRT, Digital Flat Panel,TFT, and EL support • System Controllers – PC/AT compatible • Up to 16.7 million colors (24-bit true color) • Real Time Clock – With CMOS setup; onboard • Programmable Flat Panel Support up to 1400x1050 replaceable battery provided resolution • Allows external TMDS transmitter for advanced flat • Watchdog Timer panel interfaces • Configuration EEPROM – Supports batteryless • Supports both 3.3V and 5.0V LCD panels boot capability - 4Kbits total capacity Software & Development Tools - 512 bits available for OEM use • Board Support Packages for popular Operating Systems – see Web site for current listings • BIOS – System and Video BIOS with Ampro extensions in 512KB Flash device programmable on • General Software BIOS with Ampro extensions the board Mechanical Memory • Size – 100x145mm (3.94x5.70”) • 272-Pin Interface • 100MHz, 3.3V PC100 SDRAM - Industry-standard 120-pin PCI bus interface via • Socket for one SODIMM module, 144 pin PC/104-Plus compatible connector • 16-512MB SODIMM SDRAM - 88-pin I/O interface (2x44-pin connectors) for serial, parallel, sound, USB, keyboard, mouse, IrDA & utility Bus Interface - 10-pin Ethernet • 32-bit, 33MHz PCI 2.1-compliant bus supports - 44-pin CRT and flat panel interface 4 devices (4 masters) - Primary and secondary 10-pin power & ground • Power Requirements (w/64MB RAM, 100% Loaded) I/O – all connections to baseboard unless stated PENTIUM III CELERON 1.76A@ 3.3V 1.69A@ 3.3V • EIDE – Enhanced Ultra 33/66/100 Synchronous 0.13A@ 5V 0.11A@ 5V DMA IDE interface to two drives,ATAPI extensions 1.40A@12V 0.22A@12V including DVD • Environmental – Operating temperatures: • Serial – Two TTL ports, one with full modem support - Pentium III: 0° to 50°C standard; • Parallel – ECP/EPP bidirectional port also serves as – 40° to +75°C extended floppy drive interface - Celeron: 0° to 70°C standard; • USB – Four USB Universal HCI ports – 40° to +85°C extended • IRDA – IrDA interface EnCore 700 Functional Diagram • Mouse/Keyboard – PS/2 interface CPU • Audio – AC97, CODEC on the baseboard, ™ SoundBlaster Pro and Direct Sound compatible FSB CRT/DFP 82815EM Network Interface SODIMM 5MCH2-M Flat Panel 82807AA VCH • Ethernet – integrated 10/100BaseT Ethernet (autosensing), interface and magnetics on baseboard IDE Ethernet 82801 BAM ICH2-M 4 USB Ports Sound PCI BUS Super I/O BIOS Controller PCI Floppy/ Serial/ Serial Parallel IrDA DS-ENC700 5K 1202 NOTICE: The product specifications provided in this data sheet are subject to change without notice. © 2002 Ampro Computers, Inc. All rights reserved. Ampro is a registered trademark and CoreModule, MiniModule, Little Board, and EnCore are trademarks of Ampro Computers, Inc. All other trademarks and registered trademarks are the property of their respective owners. www.ampro.com
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the EnCore 700 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods