Manufacturers
ALL SENSORS 5 INCH-D2-MV-MINI
Description
SENSOR 5" H2O D MV DUAL OS
Part Number
5 INCH-D2-MV-MINI
Price
Request Quote
Manufacturer
ALL SENSORS
Lead Time
Request Quote
Category
PRODUCTS - 5
Datasheet
Extracted Text
Miniature Low Pressure Sensors Low Pressure (2” H O to 30 “ H O) Sensors 2 2 Features • 0 to 2” H O to 0 to 30” H O Pressure Ranges 2 2 • Matched pressure port volumes • Temperature Compensated • Calibrated Zero and Span Applications • Medical Instrumentation • Environmental Controls • HVAC General Description The Millivolt Output pressure sensors is based upon a proprietary technology to reduce all output offset or common mode errors. This model provides a calibrated millivolt output with superior output offset characteris- tics. Output offset errors due to change in temperature, stability to warm-up, stability to long time period, and position sensitivity are all significantly reduced when compared to conventional compensation methods. In addition the sensor utilizes a silicon, micromachined, stress concentration enhanced structure to provide a very linear output to measured pressure. These calibrated and temperature compensated sensors give an accurate and stable output over a wide tempera- ture range. This series is intended for use with non-corrosive, non-ionic working fluids such as air, dry gases and the like. The output of the device is ratiometric to the supply voltage and operation from any D.C. supply voltage up to +16 V is acceptable. Equivalent Circuit +Vsupply 3 Input Resittance 15 k ohm Output Resistance 1.5 k ohm -Voutput + Voutput 4 2 -Vsupply 1 1-30 Pressure Sensor Characteristics Maximum Ratings Environmental Specifications 16 Vdc Supply Supply Voltage VS Temperature Ranges 1 Common-mode pressure 10 psig Compensated 0 to 50(70)° C 250°C Lead Temperature Operating -25 to 85° C (soldering 2-4 sec.) Storage -40 to 125° C Humidity Limits 0 to 95% RH Standard Pressure Ranges (non condensing) Single in Line Packages-SIP One Port Two Ports Same Side Two Ports Opposite Side Operating Part Number Part Number Part Number Pressure 2 INCH-G-MV-MINI 2 INCH-D1-MV-MINI 2 INCH-D2-MV-MINI 0 - 2 “H2O 5 INCH-G-MV-MINI 5 INCH-D1-MV-MINI 5 INCH-D2-MV-MINI 0 - 5 “H2O 10 INCH-G-MV-MINI 10 INCH-D1-MV-MINI 10 INCH-D2-MV-MINI 0 - 10 “H2O 20 INCH-G-MV-MINI 20 INCH-D1-MV-MINI 20 INCH-D2-MV-MINI 0 - 20 “H2O 30 INCH-G-MV-MINI 30 INCH-D1-MV-MINI 30 INCH-D2-MV-MINI 0 - 30 “H2O Dual in Line Packages Two Ports Same Side Two Ports Opposite Side Two Ports Same Side One Port Part Number Part Number Operating Pressure Part Number Part Number 2 INCH-SDXL-MV-MINI 0 - 2 “H2O 2 INCH-D1DIP-MV-MINI 2 INCH-D2DIP-MV-MINI 2 INCH-GDIP-MV-MINI 0 - 5 “H2O 5 INCH-SDXL-MV-MINI 5 INCH-GDIP-MV-MINI 5 INCH-D1DIP-MV-MINI 5 INCH-D2DIP-MV-MINI 10 INCH-SDXL-MV-MINI 0 - 10 “H2O 10 INCH-D1DIP-MV-MINI 10 INCH-D2DIP-MV-MINI 10 INCH-GDIP-MV-MINI 0 - 20 “H2O 20 INCH-D1DIP-MV-MINI 20 INCH-D2DIP-MV-MINI 20 INCH-SDXL-MV-MINI 20 INCH-GDIP-MV-MINI 30 INCH-SDXL-MV-MINI 30 INCH-GDIP-MV-MINI 0 - 30 “H2O 30 INCH-D1DIP-MV-MINI 30 INCH-D2DIP-MV-MINI Performance Characteristics for 2 INCH-D-MV-MINI Parameter, note 1 Minimum Nominal Maximum Units Operating Range, differential pressure 2.0 “H2O Output Span, @ 2 “H2O, note 5 9.0 10.0 11.0 mV Operating Range, differential pressure 4.0 “H2O Output Span, @ 4 “H2O, note 5 18.0 20.0 22.0 mV Offset Voltage @ zero differential pressure ±500 uV Offset Temperature Shift (0°C-50°C), note 2 ±250 uV Offset Warm-up Shift, note 3 ±100 uV Offset Position Sensitivity (1g) ±50 uV Offset Long Term Drift (one year) ±200 uV Linearity, hysteresis error, note 4 0.05 0.25 %fs Span Shift (0°C-50°C), @ 2 “H2O, note 2 ±200 uV 1-31 Performance Characteristics for 5 INCH-D-MV-MINI Parameter, note 1 Nominal Maximum Units Minimum Operating Range, differential pressure 5.0 “H2O Output Span, note 5 19.0 20.0 21.0 mV Offset Voltage @ zero differential pressure ±500 uV Offset Temperature Shift (0°C-50°C), note 2 ±150 uV Offset Warm-up Shift, note 3 ±50 uV Offset Position Sensitivity (1g) ±10 uV Offset Long Term Drift (one year) ±100 uV Linearity, hysteresis error, note 4 0.05 0.25 %fs Span Shift (0°C-50°C), note 2 ±200 uV Performance Characteristics for 10 INCH-D-MV-MINI Parameter, note 1 Minimum Nominal Maximum Units Operating Range, differential pressure 10.0 “H2O Output Span, note 5 19.0 20.0 21.0 mV Offset Voltage @ zero differential pressure ±500 uV Offset Temperature Shift (0°C-70°C), note 2 ±150 uV Offset Warm-up Shift, note 3 ±50 uV Offset Position Sensitivity (1g) ±5 uV Offset Long Term Drift (one year) ±100 uV Linearity, hysteresis error, note 4 0.05 0.25 %fs Span Shift (0°C-70°C), note 2 ±200 uV Performance Characteristics for 20 INCH-D-MV-MINI Parameter, note 1 Nominal Maximum Units Minimum Operating Range, differential pressure 5.0 “H2O Output Span, note 5 19.0 20.0 21.0 mV Offset Voltage @ zero differential pressure ±500 uV Offset Temperature Shift (0°C-70°C), note 2 ±150 uV Offset Warm-up Shift, note 3 ±50 uV Offset Position Sensitivity (1g) ±5 uV Offset Long Term Drift (one year) ±100 uV Linearity, hysteresis error, note 4 0.05 0.25 %fs Span Shift (0°C-70°C), note 2 ±200 uV 1-32 Performance Characteristics for 30 INCH-D-MV-MINI Parameter, note 1 Minimum Nominal Maximum Units Operating Range, differential pressure 30.0 “H2O 1 Output Span, note 5 19.0 20.0 21.0 mV Offset Voltage @ zero differential pressure ±500 uV Offset Temperature Shift (0°C-70°C), note 2 ±150 uV Offset Warm-up Shift, note 3 ±50 uV Offset Position Sensitivity (1g) ±5 uV Offset Long Term Drift (one year) ±100 uV Linearity, hysteresis error, note 4 0.05 0.25 %fs Span Shift (0°C-70°C), note 2 ±200 uV Specification Notes NOTE 1: ALL PARAMETERS ARE MEASURED AT 12.0 VOLT EXCITATION, FOR THE NOMINAL FULL SCALE PRESSURE AND ROOM TEMPERATURE UNLESS OTHERWISE SPECIFIED. PRESSURE MEASUREMENTS ARE WITH POSITIVE PRESSURE APPLIED TO THE B-PORT CONFIGURATION. NOTE 2: SHIFT IS RELATIVE TO 25°C. NOTE 3: SHIFT IS WITHIN THE FIRST HOUR OF EXCITATION APPLIED TO THE DEVICE. NOTE 4: MEASURED AT ONE-HALF FULL SCALE RATED PRESSURE USING BEST STRAIGHT LINE CURVE FIT. NOTE 5: THE VOLTAGE ADDED TO THE OFFSET VOLTAGE AT FULL SCALE PRESSURE. Pressure Response: for any pressure applied the response time to get to 90% of pressure applied is typically less than 100 useconds. Physical Dimensions Dual in Line (SDXL) 0.280 0.50 (7.1) (12.7) 6 5 4 0.62 (15.7) Pin 1 2 3 0.10 0.080 O.D. Typical (2.00) (2.54) Dual in Line (DIP) Two Pressure Port Same Side 1-33
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the 5 INCH-D2-MV-MINI have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods