Hall Effect Sensor - AIRPAX

Description

Airpax Hall Effect Sensors

Part Number

Hall Effect Sensor

Price

Request Quote

Manufacturer

AIRPAX

Lead Time

Request Quote

Category

PRODUCTS - H

Datasheet

Airpax-H1612-025-Magnetic-Hall-Effect-Sensor-datasheet1-194509751.pdf

151 KiB

Download

Extracted Text

Zero Velocity – Magnetic Hall Effect Sensors – 5/8 and 3/4 Threads Specifications Environmental Operating Temperature: Power Supply -40°C to +125°C Power Supply Voltage: Thermal Shock: 4.5 – 24 Vdc 100 cycles air to air (-40° to +130°C) Power Supply Current: 1 min. ramp time with 30 min. soak 50 mA maximum Salt Spray: Outputs Per MIL-STD-202, method 201, test cond. B, 5% NaCl for Ouput Voltage: 48 hrs. No visible corrosion Essentially square wave fanout to 10 TTL inputs Humidity: TTL Compatible: (See Figure 1) 92% RH@ 40°C for 90 hrs. No visible corrosion. 50% ±30% duty cycle Dielectric Strength: Logic 0: +.6 Vdc maximum Per MIL-STD-202, method 301, 1000 Vrms (60Hz) for 5 Logic 1: +4 to +4.6 Vdc @ 5mA sec. leads to case. 1.0 mA max. leakage. Insulation Resistance: Supply Tracking: (See Figure 2) Per MIL-STD-202, method 302, 500 Vdc for 30 sec. leads to case. 100 mega-ohm min. 50% ±30% duty cycle Vibration: Logic 0: +.6 Vdc maximum Per MIL-STD-202, resonant frequency search, sine method V x R Logic 1: V = S L O 204, test cond. C&D (20g); random method 214a, test cond. R + 2.2k L A&B (7.56g) for 15 min. Output Impedance: Shock: 2.2K Ohms ±5% Per MIL-STD-202, method 213b (sawtooth), test cond. H&I (100g, 6 ms), 3 shocks, mutually perpendicular planes. Output Current: 20 mA sink maximum Output Current - Short Circuit: Materials 5 mA maximum with 10V power supply Housing: Reverse Battery Voltage: 300 series stainless steel -30 Vdc Leads: Mechanical AWG #24 Teflon, 200°C Target Frequency: 0 to 15 kHz Cable: Target Air Gap: AWG #20 Irradiated cross-linked polyolefin, 125°C .005 to .020 with a 20 diametral pitch gear .005 to .045 with a 12 diametral pitch gear .005 to .060 with a 8 diametral pitch gear TTL Compatible Supply Tracking Figure 1 Figure 2 Note: Either output will work with any AI-TEK Tachometer. Dimensions in inches and (mm). 35 AI-Tek Instruments, Cheshire, CT USA Zero Velocity – Magnetic Hall Effect Sensors – 5/8 and 3/4 Threads Hex Body with Connector (Select cable from group “B” see index) Part Num. Thread “A” Dimension “B” Dimension “C” Dimension Output H1512-001 .625-18 UNF-2A 1.500 (38.100) 3.375 (85.725) 4.012 (101.905) TTL Compatible H1522-001 .625-18 UNF-2A 1.500 (38.100) 3.375 (85.725) 4.012 (101.905) Supply Tracking H1512-002 .625-18 UNF-2A 2.750 (69.850) 4.625 (117.475) 5.262 (133.655) TTL Compatible H1522-002 .625-18 UNF-2A 2.750 (69.850) 4.625 (117.475) 5.262 (133.655) Supply Tracking H1612-001 .750-20 UNEF-2A 1.500 (38.100) 3.375 (85.725) 4.012 (101.905) TTL Compatible H1622-001 .750-20 UNEF-2A 1.500 (38.100) 3.375 (85.725) 4.012 (101.905) Supply Tracking H1612-002 .750-20 UNEF-2A 2.750 (69.850) 4.625 (117.475) 5.262 (133.655) TTL Compatible H1622-002 .750-20 UNEF-2A 2.750 (69.850) 4.625 (117.475) 5.262 (133.655) Supply Tracking Net Weight: 9 oz. max. Hex Body with Cable INTERNAL 1/2 NPT Part Num. Thread “A” Dimension “B” Dimension Cable Length Output H1512-013 .625-18 UNF-2A 1.500 (38.100) 3.375 (85.725) 10 ft (3.05m) TTL Compatible H1522-013 .625-18 UNF-2A 1.500 (38.100) 3.375 (85.725) 10 ft (3.05m) Supply Tracking H1512-014 .625-18 UNF-2A 2.750 (69.850) 4.625 (117.475) 10 ft (3.05m) TTL Compatible H1522-014 .625-18 UNF-2A 2.750 (69.850) 4.625 (117.475) 10 ft (3.05m) Supply Tracking H1612-013 .750-20 UNEF-2A 1.500 (38.100) 3.375 (85.725) 10 ft (3.05m) TTL Compatible H1622-013 .750-20 UNEF-2A 1.500 (38.100) 3.375 (85.725) 10 ft (3.05m) Supply Tracking H1612-014 .750-20 UNEF-2A 2.750 (69.850) 4.625 (117.475) 10 ft (3.05m) TTL Compatible H1622-014 .750-20 UNEF-2A 2.750 (69.850) 4.625 (117.475) 10 ft (3.05m) Supply Tracking Net Weight: 9 oz. max. Dimensions in inches and (mm). 36 Zero Velocity – Magnetic Hall Effect Sensors – 5/8 and 3/4 Threads Round Body with Connector (Select cable from group “B” see index) Part Num. Thread “A” Dimension “B” Dimension “C” Dimension Output H1512-005 .625-18 UNF-2A 1.500 (38.100) 3.375 (85.725) 4.012 (101.905) TTL Compatible H1522-005 .625-18 UNF-2A 1.500 (38.100) 3.375 (85.725) 4.012 (101.905) Supply Tracking H1512-006 .625-18 UNF-2A 2.750 (69.850) 4.625 (117.475) 5.262 (133.655) TTL Compatible H1522-006 .625-18 UNF-2A 2.750 (69.850) 4.625 (117.475) 5.262 (133.655) Supply Tracking H1512-007 .625-18 UNF-2A 4.000 (101.600) 5.875 (149.225) 6.512 (165.405) TTL Compatible H1522-007 .625-18 UNF-2A 4.000 (101.600) 5.875 (149.225) 6.512 (165.405) Supply Tracking H1612-005 .750-20 UNEF-2A 1.500 (38.100) 3.375 (85.725) 4.012 (101.905) TTL Compatible H1622-005 .750-20 UNEF-2A 1.500 (38.100) 3.375 (85.725) 4.012 (101.905) Supply Tracking H1612-006 .750-20 UNEF-2A 2.750 (69.850) 4.625 (117.475) 5.262 (133.655) TTL Compatible H1622-006 .750-20 UNEF-2A 2.750 (69.850) 4.625 (117.475) 5.262 (133.655) Supply Tracking H1612-007 .750-20 UNEF-2A 4.000 (101.600) 5.875 (149.225) 6.512 (165.405) TTL Compatible H1622-007 .750-20 UNEF-2A 4.000 (101.600) 5.875 (149.225) 6.512 (165.405) Supply Tracking Net Weight: 7 oz. max. Fully Threaded with Leads Part Num. Thread “A” Dimension Lead Length Output H1512-009 .625-18 UNF-2A 1.500 (38.100) 12 (304) TTL Compatible H1522-009 .625-18 UNF-2A 1.500 (38.100) 12 (304) Supply Tracking H1512-010 .625-18 UNF-2A 2.750 (69.850) 12 (304) TTL Compatible H1522-010 .625-18 UNF-2A 2.750 (69.850) 12 (304) Supply Tracking H1612-009 .750-20 UNEF-2A 1.500 (38.100) 12 (304) TTL Compatible H1622-009 .750-20 UNEF-2A 1.500 (38.100) 12 (304) Supply Tracking H1612-010 .750-20 UNEF-2A 2.750 (69.850) 12 (304) TTL Compatible H1622-010 .750-20 UNEF-2A 2.750 (69.850) 12 (304) Supply Tracking Net Weight:3 oz. max. Dimensions in inches and (mm). 37 Zero Velocity – Magnetic Hall Effect Sensors – 5/8 and 3/4 Threads UL/CSA Explosion Proof Sensors (RED) Vin (WHT) Vout (BLK) Common (GRN/YEL TR) Housing Ground Part Num. Thread Thread Length Overall Length Cable Length Output H1612-025 .750-20 UNEF-2A 1.375 (34.92) 4.750 (120.65) 10 ft. (3.0 m) TTL Compatible Rating: UL & CSA listed for hazardous locations. Class I, Div.1, Groups A, B, C &D; Class II, Div. 1, Groups E, F & G. Temp. Code T4A. Connect only to NEC Class 2 circuits. Net Weight: 23 oz. max. (GRN/YEL TR) Housing Ground GROUND WIRE Part Num. Thread “A” Dimension “B” Dimension Cable Length Output H1512-026 .625-18 UNF-2A 1.500 (38.100) 3.375 (85.725) 10 ft (3.05m) TTL Compatible H1522-026 .625-18 UNF-2A 1.500 (38.100) 3.375 (85.725) 10 ft (3.05m) Supply Tracking H1512-027 .625-18 UNF-2A 2.750 (69.850) 4.625 (117.475) 10 ft (3.05m) TTL Compatible H1522-027 .625-18 UNF-2A 2.750 (69.850) 4.625 (117.475) 10 ft (3.05m) Supply Tracking H1612-026 .750-20 UNEF-2A 1.500 (38.100) 3.375 (85.725) 10 ft (3.05m) TTL Compatible H1622-026 .750-20 UNEF-2A 1.500 (38.100) 3.375 (85.725) 10 ft (3.05m) Supply Tracking H1612-027 .750-20 UNEF-2A 2.750 (69.850) 4.625 (117.475) 10 ft (3.05m) TTL Compatible H1622-027 .750-20 UNEF-2A 2.750 (69.850) 4.625 (117.475) 10 ft (3.05m) Supply Tracking Rating: UL & CSA listed for hazardous locations. Class I, Div.1, Groups A, B, C &D; Class II, Div. 1, Groups E, F & G. Temp. Code T4A. Connect only to NEC Class 2 circuits. Net Weight: 9 oz. max. TTL Compatible Supply Tracking EARTH GROUND EARTH GROUND HOUSING HOUSING (GRN/YEL TR) (GRN/YEL TR) Dimensions in inches and (mm). 38 Zero Velocity – Magnetic Hall Effect Sensors – 3/8 Diameter Specifications Mechanical Target Frequency: Power Supply 0 to 15 kHz Power Supply Voltage: Target Air Gap: 4.5 – 24 Vdc .000 to .015 with a 20 diametral pitch gear Power Supply Current: .000 to .040 with a 12 diametral pitch gear .000 to .055 with a 8 diametral pitch gear 50 mA maximum Environmental Outputs Operating Temperature: Ouput Voltage: -25°C to +125°C (105°C Cable) Essentially square wave fanout to 10 TTL inputs Materials Supply Tracking: (See Figure 1) Housing: 50% ±30% duty cycle Aluminum / 300 series stainless steel Logic 0: +.6 Vdc maximum V x R Logic 1: V = S L Leads: O R + 2.2k L AWG #24 Teflon, 200°C Output Impedance: Cable: 2.2K Ohms ±5% AWG #26 PVC, 105°C Output Current: 20 mA sink maximum Output Current - Short Circuit: 5 mA maximum with 10V power supply Reverse Battery Voltage: -30 Vdc Supply Tracking Figure 1 Note: Will work with any AI-Tek Tachometer. Dimensions in inches and (mm). 39 Zero Velocity – Magnetic Hall Effect Sensors – 3/8 Diameter Fully Threaded Part Num. Thread Cable Length (C) Lead Length (L) Housing Mat'l. H1320-001 .375-32 UNEF-2A — 12 in. (304) Aluminum H1320-003 .375-32 UNEF-2A 10 ft. (3.05 m) — Aluminum H1320-009 .375-24 UNF-2A — 12 in. (304) 300 St. Steel H1320-010 .375-24 UNF-2A 10 ft. (3.05 m) — 300 St. Steel Net Weight: 0.7 oz. max. Round Body Part Number Cable Length (C) Lead Length (L) Housing Mat'l. H1320-005 — 12 in. (304) Aluminum H1320-006 10 ft (3.05 m) — Aluminum Net Weight: 0.5 oz. max. * Note difference in target direction with regard to flat (vs. threaded sensor). Dimensions in inches and (mm). 40

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products