H Hewlett-Packard SmartWand Bar Code Reader Technical Data HBSW-8000 Series Polycarbonate or Metal Housing Features • Automatically Decodes 9 Bar Code Symbologies - Code 39 – Standard or Extended - Int. 2 of 5 Code 128 - UPC A, E EAN 8, 13 - Codabar Code 11 - MSI Code Code 93 • LED Feedback • Low Current Draw • Programmable Either by Bar Code Labels or by Escape Sequences • Configuration Stored in Non- Volatile Memory • CMOS/TTL Interface - Output 0 to 5 volts - Input up to ± 15 volts • Manufacturing - ISO 9002 configuration is stored in non- digital wand emulation mode, Certified volatile memory, allowing the serial port configuration, and • Full One Year Warranty SmartWand Reader to retain the various I/O protocols such as configuration when the power is single read modes, Xon/Xoff turned off. A Configuration pacing and no-read recognition. Description Display option sends a summary The Hewlett-Packard SmartWand of the configured options to the The polycarbonate-cased Bar Code Reader is a bar code screen. SmartWand Readers (HBSW- scanning wand with an integrated 8000,8200,8400) have an LED decoder. It transmits data to a In its default configuration, the near the tip that flashes after a computer via an asynchronous SmartWand Reader can good read. The LED also flashes serial port, using CMOS level automatically recognize and during bar code menu signals, at user definable baud decode 9 standard bar code programming and to signal any rates. The SmartWand Reader’s symbologies. Configurable self-test failures after power-up. configuration may be changed by options include: symbology scanning special bar code menus, selection, checksum verification, All SmartWand Readers have an or by sending escape sequences length checking, message editing, enhanced software version of to the wand from the host. The LED feedback control, Code 39 Hewlett-Packard’s proven 4-66 5965-5940E decoding algorithm. The Programmable Features Environmental SmartWands are also very Bar code selection and Temperature: suitable for portable computer or decoding options Operating: terminal applications due to its Check character verification -20°C to 70°C (-4°F to 158°F) low current draw. and transmission Storage: Serial port parameters and I/O -40°C to 70°C (-40°F to 158°F) protocols Humidity (Non-condensing): Message editing Visual Feedback LED 95% at 40°C (104°F) max. Header and terminators The SmartWand Readers with Ambient Light: LED operator feedback polycarbonate-cases have an easy- 100,000 lux (maximum) Label length checking to-see Feedback LED near the Rain: No Read recognition scanner tip that acknowledges a MIL-STD-810, Method 506, Digital wand Code 39 emulation good read. This is useful in a Procedure II (Polycarbonate) noisy environment or where Dust: silence is required. Since the Wand Specifications MIL-STD-810, Method 510 state of the LED can be controlled Scan Speed ......... 7.6 to 127 cm/s Shock: by escape sequences, the host (3 to 50 in/s) Ten drops to sealed concrete processor can turn the LED on or Tilt Angle ....................... 5° to 40° (random orientation) from off at any time. Minimum Contrast ............... 45% 1.2 m (4 ft) Color...................................Black Wand Diameter ... 23 mm (0.9 in) Wand Length .... 160 mm (6.3 in) SmartWand Reader Weight: Configuration Aluminum.......... 153 g (5.4 oz) The SmartWand Reader can be Polycarbonate ... 140 g (4.9 oz) configured by scanning special Tip ................................ Sapphire bar code labels or by receiving escape sequence commands from the host. This allows decoding Configuration Display options and interface protocols to be tailored to a specific applica- tion. Configuration labels and a list of escape sequences are printed in the SmartWand User’s Manual (P/N: HBSW-8997). The SmartWand Reader can display its current configuration on the host’s screen. See sample. 4-67 Electrical Interface Typical Current Draw - I (mA) CC V CC V Limits (V) Min. Max. CC Operating 4.5 6.0 Mode 4.5 5.0 6.0 Absolute Rating -0.3 6.0 Idle 8 9 12 Supply Ripple 100 mV peak to peak Scanning 16 18 24 With LED on 25 29 38 General Mechanical Specifications FCC Certification HP’s SmartWand Readers have SAPHIRE TIP 23.0 (0.9) received FCC certification for LED their standard configuration only. H HEWLETT PACKARD Any customer purchasing the product with stripped and tinned 160 (6.3) leads or a connector without 19.0 (0.8) adequate shielding has the responsibility to comply with FCC 790 (31) regulations. Moreover, if the HP 590 (27) SmartWand Reader is purchased 24.9 33 (0.98) 230 (9) without a connector, the product (1.3) 180 (7) becomes defined as a sub- 7.6 (0.3) 38.1 (1.5) assembly and the FCC Identifica- 15.2 (0.6) 66 (2.6) tion number no longer applies. 300 (12) 200 (8) HP assumes no responsibility or liability for users of the HP SmartWand Readers without H HEWLETT PACKARD 23.9 (0.94) connectors that fail to comply with FCC regulations. 160 (6.2) 17.6 (0.69) 13.3 (0.52) DIA. This equipment has been tested and found to comply with the 790 (31) limits for a Class B digital device, 590 (27) pursuant to Part 15 of the FCC 24.9 Rules. Operation is subject to the 33 (0.98) 230 (9) (1.3) following two conditions: (1) This 180 (7) device may not cause harmful 7.6 (0.3) 38.1 (1.5) interference, and (2) this device 15.2 (0.6) 66 (2.6) 300 (12) must accept any interference 200 (8) received, including interference DIMENSIONS IN MILLIMETERS (INCHES) that may cause undesired operation. The CE Mark demonstrates Model FCC Identification compliance with EC directives on EMC. HBSW-8XXX FCC ID: B94KDRZ Series 4-68 Connector TxD Output Specifications The standard connector is a 9 pin male D (V = 4.5 V, T = 25°C) CC A connector. There is also an option for the cable to have stripped and tinned wires. Min. Max. V 4.4 V @ 20 μA OH 3.8 V @ 6 mA Pin Diagram V 0.10 V @ -20 μA OL 0.33 V @ -6 mA Wire Pin # Color Function I 35 mA OL 1 - N/C 2 White TxD Transmitted Data TxD Circuit (from the Reader) TxD 3 Green RxD Received Data (to the Reader) 74HCT240 4, 5, 6 - N/C 7 Black Ground Pin 3 RxD - The received data signal RxD expects the standard asynchronous serial data 8 - N/C format. It will accept either CMOS level or true 9 Red V CC RS-232 level signals. The figure below shows the equivalent input circuit. Shell Braid Shield Shield and ground are tied together in the connector. RxD Input Specifications (V = 5.0 V, T = 25°C) CC A V 2.0 V 500 μA IH V 0.8 V @ 1 μA IL 1 2 3 4 5 RxD Circuit 6 7 8 9 100 kΩ RxD MALE 9 PIN SUBMINIATURE D CONNECTOR 74HCT240 4.7 kΩ Pin Description Note: If the part is purchased with stripped and Pin 2 TxD - The data output signal TxD obeys tinned wires, or if the connector is removed, the standard serial asynchronous data formats, but ground and shield wires must be connected uses zero to five volts CMOS logic levels. It can together for proper operation. be described as CMOS level RS-232. The TxD output circuit is shown in the figure below. It will drive TTL, LSTTL, CMOS, HC, and HCT inputs. 4-69 Ordering Information Warranty and Service The Hewlett-Packard SmartWand LED Bar Code Reader is warranted for Part Number Housing Resolution Wavelength a period of one year from date of purchase covering defects in HBSW-8000* Polycarbonate Low – 655 nm material and workmanship. Hewlett-Packard will repair or, at HBSW-8100* Metal 0.33 mm (0.013 in) its option, replace products that HBSW-8200 Polycarbonate Medium – 655 nm prove to be defective in material or workmanship under proper use HBSW-8300 Metal 0.19 mm (0.0075 in) during the warranty period. HBSW-8400* Polycarbonate High – 820 nm HEWLETT-PACKARD MAKES NO HBSW-8500* Metal 0.13 mm (0.005 in) WARRANTY OF ANY KIND WITH * Low and High Resolution SmartWand Readers are built to order devices. REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. SmartWand Kits HBSW-8205 - Polycarbonate SmartWand Kit Includes: HBSW-8200 General Purpose Reader HBSW-8997 User’s Manual HBCS-2998 Black Wand Holder HBSW-8305 - Metal SmartWand Kit Includes: HBSW-8300 General Purpose Reader HBSW-8997 User’s Manual HBCS-2998 Black Wand Holder SmartWand Accessory Part Numbers HBSW-8997 User’s Manual HBCS-2998 Wand Holder (black polycarbonate ) HBSW-8991 Replacement Polycarbonate Case with LED Window and Tip HBCS-4999 Replacement Tip for Metal Case HBCS-A990 Plastic Case Replacement Tool 4-70