ADVANTECH SOM-4451FL
Specifications
Audio Function
Chipset: SiS552; Audio controller: AC97 ver. 2.0 compliant interface Mechanical and Environmental
BIOS
Award 256KB Flash memory
Chipset
SiS-552
CPU
Embedded low power SiS 552 200 MHz processor(provides fanless operation)
Dimensions(LxW)
SOM-ETX form factor, 95X114mm(3.7"x4.5")
Display modes
Non-interlaced CRT monitor up to 1024 x 768@16bpp(60Hz); LCD/Simultaneous modes: 1024x768@16bpp(60Hz)
ENHANCED IDE INTERFACE
One Enhanced IDE interface that supports 2 IDE devices PIO mode 3,4 UDMA33 transfer.
Ethernet Interface
RealTek™ RTL 8139; Ethernet interface: IEEE 802.3u 100BASE-T Fast Ethernet compatible; Built-in boot ROM
FDD Interface
Supports up to two FDDs (360 KB/1.2 MB/720KB/1.44 MB/2.88 MB) and shared with Parallel port.
Frame Buffer
Supports 32/64MB frame buffer with system memory.
Interface
Ultra-AGP for Hardware 2D/Video/Graphics Accelerators, supports 18-bit TFT LCD interface.
IR port
One 115 kbps IrDA compliant serial infrared
Keyboard/Mouse Connector
Supports standard PC/AT keyboard and a PS/2 mouse.
Operating Temperature
0 ~ 60°C (32 ~ 140°F)
Parallel Port
One parallel port, supports EPP/ECP
Power Management
Supports power saving modes including Normal/Standby/Suspend modes. APM 1.2 compliant.
Power Requirements
Max: 2.5A@+5V; Typical: 1.92A@ +5V (with 128MB DRAM)
Power supply voltage
+5V+/-5%
Processor
SiS 552
Serial Ports
2 serial RS-232 ports.
System Memory
One SDRAM SODIMM socket, max up to 512MB
TV-out(optional)
Chipset: SiS301. Supports NTSC, NTSC-EIA (Japan) and PAL TV formats
USB
Two universal serial bus ports.
Watchdog Timer
62-level timer interval SVGA/Flat Panel Interface
Weight
0.27 Kg (0.59 lbs)
Features
- 62-level watchdog timer, jumperless on-line setup supported
- On-board 200 MHz SiS 552 processor (fanless)
- On-board VGA/LCD display controller and 18-bit LCD TFT display
- SSD support for DOC TSOP1 (optional)
- Supports CMOS data backup functions
- Supports wake on LAN, wake on ring (modem)
Datasheet
Extracted Text
SiS SOM-ETX Module with CPU, Audio, VGA/LCD, LVDS and Ethernet SOM-4451 SODIMM socket Flash BIOS SiS 552 Introduction Advantech's new SOM-4451 is a SOM-ETX CPU module board True multimedia SOM-ETX SOM-4451 integrates Ultra-AGP with an on-board, embedded low power 200 MHz SiS 552 technology to deliver high performance GUI-memory bandwidth. processor. Other on-board features include a VGA/LCD Furthermore, SiS552 provides powerful slice layer decoding DVD controller with 18-bit LCD TFT display and 10/100 Mbps PCI accelerator to improve the DVD playback performance. In addition Ethernet interface. A SOM-ETX is provided, with PCI/ISA/ to providing the standard interface for CRT monitors, SOM-4451 Audio/VGA&LCD and also optional SSD support for DOC. 62- also provides a Digital Flat Panel Port(DFP), and also supports level watchdog timer and jumperless on-line setup is also NTSC/PAL Video Output. SOM-4451 also adopts Share System supported. Memory Architecture that can flexibly utilize the frame buffer size up to 128MB. SOM-ETX with SiS 552 Processor Available Now With this board, system engineers will now be able to upgrade Features their 486-based systems to 586 level without worries, because On-board 200 MHz SiS 552 processor (fanless) a pentium level SiS 552 processor is mounted directly on On-board VGA/LCD display controller and 18-bit LCD TFT board. Mounting CPUs directly on board eases the display configuration and installation process because there is no need to set any jumpers for speed or voltage differences between 62-level watchdog timer, jumperless on-line setup various CPUs. In addition to ease of configuration, the SiS 552 supported 200 MHz low-power CPU has been specially designed to work Supports wake on LAN, wake on ring (modem) ° well in environments with temperatures of up to 60 C without SSD support for DOC TSOP1 (optional) need of a fan. Eliminating the CPU fan from a system significantly reduces MTBF worries and increases application Supports CMOS data backup functions possibilities. www.advantech.com/som SOM-4451 Specifications Ethernet Interface CPU: Embedded low power SiS 552 200 MHz processor (provides fanless operation) RealTek™ RTL 8139 -Ethernet interface: IEEE 802.3u 100BASE-T Fast Ethernet BIOS: Award 256KB Flash memory compatible Chipset: SiS 552 (on-chip) -Built-in boot ROM System memory: One SDRAM SODIMM socket, max up to 512 MB Audio Function Enhanced IDE interface: One Enhanced IDE interface that Chipset: SiS552 supports 2 IDE devices PIO mode 3,4 UDMA33 transfer. Audio controller: AC97 ver. 2.0 compliant interface FDD interface: Supports up to two FDDs (360 KB/1.2 MB/720 KB/1.44 MB/2.88 MB) and shared with Parallel port. Mechanical and Environmental Parallel port: One parallel port, supports EPP/ECP Dimensions(LxW): SOM-ETX form factor, IR port: One 115 kbps IrDA compliant serial infrared 95X114mm(3.7"x4.5") Serial ports: 2 serial RS-232 ports. Power supply voltage: +5V+/-5% Keyboard/mouse connector: Supports standard PC/AT Power requirements: keyboard and a PS/2 mouse. Max: 2.5A@+5V USB: Two universal serial bus ports. Typical: 1.92A@ +5V (with 128MB DRAM) Power management: Supports power saving modes including Operating temperature: 0 ~ 60°C (32 ~ 140°F) Normal/Standby/Suspend modes. APM 1.2 compliant. Weight: 0.27 Kg (0.59 lbs) Watchdog timer: 62-level timer interval SVGA/Flat Panel Interface Ordering Information Chipset: SiS-552 SOM-4451F-D0A1: SOM-ETX CPU Module W/SiS552 CPU, VGA/LCD, Ethernet and Frame buffer: Supports 32/64MB frame buffer with system Audio memory. SOM-4451FL-D0A1 Interface: Ultra-AGP for Hardware 2D/Video/Graphics SOM-ETX CPU Module W/SiS552 CPU, VGA/LVDS, Ethernet Accelerators, supports 18-bit TFT LCD interface. and Audio Display modes: SOM-DB4400: Non-interlaced CRT monitor up to 1024 x 768@16bpp(60Hz); LCD/Simultaneous modes: 1024x768@16bpp(60Hz) Development Board for SOM-ETX TV-out(optional) SOM-DK4451F-C01: Chipset: SiS301. Supports NTSC, NTSC-EIA (Japan) and PAL Windows CE 3.0 Developemnt Kit for SOM-4451F TV formats 2010445100 MN0L Note: All features and specifications are subject to change without notice.
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the SOM-4451FL have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods