ADVANTECH SNMP-1000-E2A1
Datasheet
Extracted Text
SNMP-1000 Intelligent SNMP/HTTP System Manager Features § Monitors system fans, temperature, voltage, power supply, CPU fan, CPU temperature, Vcore, watchdog timer, etc. § Stand alone system monitoring: no driver needed, OS independent § Remote alarm notification through SNMP/HTTP, e-mail or pager § Easy status monitoring through Ethernet using a browser § Optional LCD message display § Highly reliable: functions even when system or power fails § Modular design eases system integration and customization Introduction The SNMP-1000 is a platform independent system management module that can detect system operating conditions and notify users to take necessary action to avert system failure through multiple communication protocols. With the SNMP-1000 installed, a system monitoring and management can be integrated into a user’s existing SNMP-based network management environment. The SNMP-1000 also has a built-in Web-based administration interface which allows users to monitor the system operation from any place with Internet connectivity. The SNMP-1000 adds another dimension of reliability to your most critical applications. Powerful yet Easy to Use The SNMP-1000 can detect a wide variety of internal system conditions, including temperature, voltage, fan rotation, power supply or CPU operations such as watchdog timer output. Through its I2C interface it can even monitor CPU temperature and voltages of Advantech’s full-sized CPU cards. Depending on the alarm severity or user setup, it can generate several different alarm outputs, including SNMP trap, e-mail, pager, acoustic signal, system reset, digital output, or LCD message (requires the SNMP-1000-LCD module). Through the easy to use web-based user interface, users can set the alarm criteria and select alarm outputs for each sensor input independently to meet user requirements. The backup battery enables the SNMP-1000 to perform its alarm function even during total system power failure. Web-enabled, No Driver Needed The on-board 10/100 Mbps Fast Ethernet interface enables the SNMP-1000 to be connected to your existing network, independent from the system’s connection. It supports multiple network protocols such as TCP/IP, SNMP, HTTP and Telnet, allowing you to manage your systems simply by using a web browser. No special software driver is needed thus eliminating compatibility issues with different operating systems. On-line Upgrade and Batch Setup You can upgrade the firmware on-line by using the included setup utility. There is no need to go to a remote site and disassemble the chassis to collect each SNMP-1000 module or card for firmware upgrade. The setup utility also supports “batch setup” function, which allows you to save a configuration and duplicate it to many other SNMP-1000 modules and cards. This function saves tremendous time and effort when you have a number of SNMP-1000 units installed in your environment. Flexible Modular Hardware Design The modular design of the SNMP-1000 allows it to be easily customized to fit into any system. The ultra compact module is only 41 mm wide and 94 mm long. It can be mounted on standard or customized carrier boards to plug into any standard PCI/ISA slot. It also can be installed on the specially designed LCD Message Display module (SNMP-1000-LCD) to fit into any 5.25" drive bay. Accessory Options LCD Message Display Module with Keys § LCD module: 2 rows, 16 digits, with backlight § Dimensions (W x H x D): 148 x 42 x 158 mm, compliant with a standard 5.25" device bay § 5 Keys: Up, Down, Enter, Escape, Alarm Sound Off § Space reserved to carry a 3.5" hard disk drive SNMP-1000-LCD SNMP-1000-E1A1 SNMP-1000-E2A1 Online Download www.advantech.com/products Advantech may make changes to specifications and product descriptions at any time, without notice. Last Updated: 2004-04-19 SNMP-1000 Firmware Specifications Sensor Specifications Features Real-time healthy status monitoring: Provides real-time Voltage Input +5 VDC, -5 VDC, +5 VSB, +3.3 VDC, +12 VDC, -12VDC status display in HTTP/Java graphical format System Status 9 (one for on-board sensor, eight for external Input Monitoring and History log up to 600 records. Data can be downloaded sensors) Management through network or sent by e-mail Temperature Sensor LM75 2 Alarm event record display Interface I C E-mail: Can set up to 4 addresses to receive e-mails Range -30 ~ 125 °C (-22 ~ 257 °F) SNMP trap: Notify up to 8 SNMP administrators Input 9 (7 for SNMP-1000-E2A1) Fan Speed Pager notification: Dial out through external modem to Range 700 ~ 10000 rpm Alarm Notification send messages to up to 8 pagers Input 4 (1 for SNMP-1000-E2A1) Power Good LCD alarm message display Range High > 2.4 V , Low < 0.8 V DC DC 2 Audible alarm sound Interface I C TCP, UDP, IP, ICMP, DHCP, BOOTP, ARP, SNMP, HTTP, CPU Vcore, CPU fan, CPU temperature (up to 2 Supported Protocols Input Telnet CPU Card CPUs), +5V , -5V , V , +12V , -12V DC DC I/O DC DC Web-based remote configure, control and monitor Healthy PCA-6002-B, 6003, 6004, 6005-B, 6181, 6183, Remote reset, power down and power up Compatibility 6184, 6185, 6186, 6277-B, 6187, 6188; Remote digital output signal control AIMB-740, 741, 742, 744 Management Function Remote message display control Digital Input/ Input 8 (SNMP-1000-E1A1 only) Output Output 4 (3 for SNMP-1000-2A1) Firmware upgrade from serial port and Ethernet port Modem dial in (console mode only) System Specifications Processor System CPU 80188 compatible Firmware 512 KB Embedded Flash ROM Environment Memory 512 KB SRAM Ethernet Interface 10/100 Base-T Interface RS-232 Serial Port Baud Rate 9600 bps Buzzer Support Yes Miscellaneous Detect Time-out Signal of System Yes Watchdog Timer Yes Charge Time 24 hr Battery Type Ni-MH Battery Capacity 1500 mA-H (full charged, for 15~20 minutes operation, depends on the system configuration) Battery Life 80% capacity @ 20 °C after 1000 cycles of charge and discharge Typical 5 V @ 550 mA Operating Non-Operating Power Requirement Temperature 0 ~ 60 °C (-32 ~ 140 °F) -20 ~ 70 °C (4 ~ 158 °F) Humidity -- 5 ~ 95 % RH, non-condensing Dimensions Kernel module: 40.5 x 93 mm (1.59" x 3.66") Physical Carrier board: 55 x 115 mm (2.17" x 4.53") PCI/ISA I/O extension module: 175 x 107 mm (6.89" x 4.21") Ordering Information Part Number Descriptions SNMP/HTTP system manager development kit, including the kernel module mounted on a PCI/ISA carrier board, 3 sets of temperature sensors, SNMP-1000-E1A1 and cables SNMP-1000-E2A1 SNMP/HTTP system manager card for ACP series chassis, including the kernel module SNMP-1000-LCD Message display module with keys Online Download www.advantech.com/products Advantech may make changes to specifications and product descriptions at any time, without notice. Last Updated: 2004-04-19
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the SNMP-1000-E2A1 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods