PCM-9587F-M0A1E - ADVANTECH

Description

Part Number

PCM-9587F-M0A1E

Price

Request Quote

Manufacturer

ADVANTECH

Lead Time

Request Quote

Category

EMBEDDED SINGLE BOARD COMPUTER » EBX & 5.25" SINGLE BOARD COMPUTER

Specifications

10/100 LAN

Audio

AC97, Speaker out, CD-input, Line-in, Line-out, Mic-in
Yes

Battery

Lithium 3 V/196 mAH

BIOS

Award 4 Mbit

Board Type

5.25 in

Yes

Channel

1
2

Chipset

Intel 852GM + 6300ESB

CompactFlash

Card Type I, Type II (shared 2nd IDE Channel)

Controller

Intel 82551ER, optional 82541PI (Giga LAN)
Intel 852GM

CPU

Intel ULV Celeron M 600 MHz/1.0 GHz

CRT

Yes

Dimensions (L x W)

203 x 146 mm (8" x 5.75")

Dual Independent Display

CRT + LVDS, DVI + LVDS, TV-out +LVDS, CRT + DVI

DVI

Yes

FDD

Front Side Bus

400 MHz

GPIO

8-bit general purpose input/output

Interface

RJ-45 by cable

Interval

Programmable 1 ~ 255 sec

K/B

L2 Cache

512 KB/ 0 KB

LPT

LPT/FDD/KB/MS

Yes

LVDS

36-bit

LVDS LCD

1 x 36-bit LVDS

Max. Capacity

1 GB

Max. Data Transfer Rate

150 (RAID 0/1)

Mini PCI

miniPCI

Mode

UDMA 100

Mouse

Operating Humidity

0% ~ 90% relative humidity, non-condensing

Operation Temperature

0 ~ 60° C (32 ~ 140° F)

Output

System reset

PC/104+

Yes

PC/104-Plus

1 (8-bit ISA)

PCI

PCISlot

Power Consumption: Max, test in HCT

2.63 A @ 5 V, 0.03 A @ 12 V (Celeron M 600 with 256 MB DDR266)

Power Consumption: Typical

2.62 A @ 5 V, 0.03 A @ 12 V (Celeron M 600 with 256 MB DDR266)

Power Management

APM, ACPI

Power Supply Voltage

+5 V ± 5%, +12 V ±5%

Power Type

AT/ATX

Processor

Intel Celeron M

RS-232

RS/232/422/485

SATA

SMBus

Supported

Socket

1 x 184-pin DIMM

Speed

10/100Mbps

Technology

DDR 200/266, ECC

Thermal Solution

Passive

TV out

Optional

TV-out

Supports both NTSC/PAL, S-video and Composite Video (optional)

USB

4 x USB 2.0

USB 2.0

VRAM

Optimized Shared Memory Architecture up to 32 MB system memory

Weight

0.85 kg (1.87 lb) (weight of total package

Features

EBX form factor standard and support for PC/104-Plus bus
Embedded Intel Celeron M 600 MHz
Operating temperature 0 to 60C
Supports 10/100Base-T Ethernet
Supports ECC DDR memory up to 1GB
Supports four USB 2.0 ports
Supports up to two channel 48-bit LVDS interface

Datasheet

pcm-958-12348142947.pdf

451 KiB

Download

Extracted Text

Onboard Intel® Celeron® M 600MHz PCM-9587 EBX SBC with Audio, VGA/LCD, SATA NE NEW W Features PCI DVI LVDS TV-Out Audio  Embedded Intel® Celeron® M 600 MHz  Supports ECC DDR Memory DIMM up Power  Applied EBX form fator standard and support PC/104-Plus bus to 1GHz  Supports up to 10/100Base-T Ethernet Ethernet  Supports 4 ports Host USB 2.0 FDD  Supports up to 2 channel 48-bit LVDS interface 1st IDE USB3, 4 Intel® Celeron Processor USB1, 2 PC/104+ KB/Mouse SATA 4 COM Display Speciﬁcations  Chipset Intel 852GM chip integrated. (Extreme Graphics 2)  Memory Size OptimizedS haredM emoryA rchitecture,s upportsu pt o General 64 MB frame buﬀer using system memory  CPU Embedded Intel Celeron M  System Chipset Intel 852GM GMCH/ 6300ESB Chipset  Resolution CRT Display mode: pixel resolution up to 1600 x 1200  BIOS AWARD 512 kbit Flash BIOS at 85-Hz and 2048 x 1536 at 75-Hz  System Memory 184 pin DIMM socket, support ECC Double Data Rate LCD Display mode: Dual channel LVDS panel supports (DDR) 128 MB to 1 GB, accept 128/256/512/1000 MB upt oU XGAp anelr esolutionw ithf requencyr angef rom DR200/266 DRAM 25 MHz to 112 MHz  Power Management APM1.2, ACPI support  LCD Interface 2 Channel (2 x 24-bit) LVDS  SSD Supports CompactFlash® Card TYPE I/II (shared 2nd  LVDS Hirose connector support up to 2 channel (2 x 24-bit) IDE Channel) LVDS LCD Panel  WatchDog Timer Winbond W83627, 255-level timer interval, setup by  TV-Out (Cable optional) Supports both NTSC/PAL, S-video and Composite software Video  Expansion Interface Supports PC/104 (Low Pin Count), PC/104 -Plus ,  Dual Independent CRT + 48-bit LVDS; DVI/TV-out + 48-bit LVDS; Mini PCI interface and 1 x PCI slot Display CRT + DVI  Battery Lithium 3 V/196 mAH Mechanical and Environmental I/O  Dimension (LxW) 203 mm x 146 mm (8" x 5.75")  I/O Interface 1 x EIDE (UDMA 100),2 x SATA 150, 1 x FDD , 1 x K/B,  Weight 0.85 kg (weight of total package) 1 x Mouse, 3 x RS232, 1 x RS232/422/485,1 x LPT  Operating Temperature 0 ~ 60° C (32~ 140° F)  USB 4 USB 2.0 compliant Ports  Operating Humidity 0% ~ 90% relative humidity, non-condensing  Audio 6300ESB AC97 3D surround stereo sound Supports Speaker out, CD-input, Line -in, Line-out, Power Microphone  Power Supply Voltage +5 V ± 5%, +12 V ± 5%  IrDA N/A  Power Consumption (Celeron M 600 with 256 MB DDR266)  GPIO 8-bit general purpose input/output Max(HCT): 2.63 A @ 5 V, 0.03 A @ 12 V Typical: 2.62 A @ 5 V, 0.03 A @ 12 V Ethernet  Chipset Intel 82551ER, optional 82551QM  Speed 10/100 Mbps  Interface RJ45 by cable  Standard IEEE 802.3u 100Base-T Single Board Computers Last updated : 10-Aug-2005 Allp roducts pecificationsa res ubjectt oc hangew ithoutn otice PCM-9587 Board Diagram �� Packing List Ordering information  1 x PCM-9587 SBC Standard  1 x Mini Jumper Pack (p/n:9689000002)  PCM-9587F-M0A1 PCM-9587 On Board Intel® Celeron® M  1 x Startup Manual 600MHz EBX SBC w/LAN/Audio/LVDS/SATA  1 x Utility CD  1 x ATX Power Cable (p/n:1700001112) Optional Accessories  PCM-10586-6200 Wiring kit for PCM-9582/9587  1703050306 TV-out cable  1703100260 USB cable (26 cm)  1703100121 USB cable (12 cm) Online Download www.advantech.com/products

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products