PCM-9586Z-M0A1E - ADVANTECH

Description

Part Number

PCM-9586Z-M0A1E

Price

Request Quote

Manufacturer

ADVANTECH

Lead Time

Request Quote

Category

EMBEDDED SINGLE BOARD COMPUTER » EBX & 5.25" SINGLE BOARD COMPUTER

Specifications

Audio

ICH4 chip. AC97 3D surround stereo sound Support Speaker out, CD-input, Line -in, Line-out, Microphone

Battery

Lithium 3 V/196 mAH

BIOS

AWARD® 512 kbit Flash BIOS

Chipset

Intel 852GM chip integrated. (Extreme Graphics 2)
Intel 852GM GMCH/ICH4 Chipset

Controller

Intel 82551ER, optional 82551QM, 82540GI (Gigabit)

CPU

Embedded Intel Celeron M

Dimensions

203 x 146 mm (8" x 5.75") 0.85 kg (weight of total package)

Display Interface

CRT + LVDS

Expansion Interface

Support a PCI2.2 with 32-bit/33 MHz slot and Mini PCI interface

Gross Weight

8-bit general purpose input/output

I/O Chipset

2 x EIDE (UDMA 100), 1 x FDD (optional), 1 x K/B, 1 x Mouse, 3 x RS232, 1 x RS232/422/485, 1 x LPT

Input

1 x RJ45 by cable

IR Interface

SIR 115 kbps, IrDA 1.1 Compliant

LCD Controller

Hirose connector support up to 2 channel (2 x 18-bit) LVDS LCD Panel

LCD Interface

2 Channel LVDS

Memory

Optimized Shared Memory Architecture, support up to 64 MB frame buffer using system memory

Operating Humidity

0% ~ 90% relative humidity, non-condensing

Operating Temperature

0 ~ 60° C (32 ~ 140° F)

Power Consumption

(Celeron M 600 with 256 MB DDR266) Max: +5 V @ 2.1 A, +12 V @ 0.22 A Typical: +5 V @ 1.75 A, +12 V @ 0.2 A

Power Management

APM 1.2, ACPI support

Power Supply

+5 V ±5%, +12 V ±5%

Processor

-20 ~ 70° C (accessories Storage temperature: -20 ~ 60° C)
Intel Celeron M

Programming

95% @ 60° C

Resolutions

CRT Display mode: pixel resolution up to 1600 x 1200 at 85-Hz and 2048 x 1536 at 75-Hz LCD Display mode: Dual channel LVDS panel supports up to UXGA panel resolution with frequency range from 25 MHz to 112 MHz

Speed

10/100 Mbps; 10/100/1000 Mbps (optional)

SSD

Supports CompactFlash Card TYPE I/II (shared 2nd IDE Channel)

System Memory

2 x 184-pin DIMM sockets, support Double Data Rate (DDR)128 MB to 2 GB, accepts 128/256/512/1024 MB DR200/266 DRAM

System Monitor

IEEE 802.3u 100Base-T and IEEE 802.3z/ab 1000Base-T compatible. Built-in boot ROM in Flash BIOS (optional)

TV-out

Support both NTSC/PAL, S-video and Composite Video

USB

6 x USB 2.0 compliant Ports

Watchdog Timer

255-level interval timer from 15 sec to 14835 sec, setup by software, jumperless selection, generates system reset

Features

Embedded Intel® Celeron® M 600 MHz/ Celeron® M 1 GHz
Extended temperature optional
Supports Enhanced Intel Speedstep® Technology
Supports six USB 2.0 ports
Supports up to 1000Base-T Ethernet
Supports up to two channel 36-bit LVDS interface
Ultra low power Celeron M core

Datasheet

PCM-9586_d-694249567s.pdf

178 KiB

Download

Extracted Text

Onboard Intel® Celeron® M 600 MHz PCM-9586 5.25" SBC with Audio, VGA/LCD Features PCI  Embedded Intel® Celeron® M 600 MHz/ Celeron® M 1 GHz  Ultra low power Celeron M core Ethernet 2 x DIMM  Supports up to 1000Base-T Ethernet Primary IDE  Supports six USB 2.0 ports Secondary  Supports up to two channel 36-bit LVDS interface IDE Intel Celeron M 600 MHz LPT  Supports Enhanced Intel Speedstep® Technology GPIO  Extended temperature optional 6 x USB ATX Power LVDS KB/Mouse CRT 4 COM Audio Display Speciﬁcations  Chipset Intel 852GM chip integrated. (Extreme Graphics 2)  Memory Size Optimized Shared Memory Architecture, support up to General 64 MB frame buffer using system memory  CPU Embedded Intel Celeron M  Resolution CRT Display mode: pixel resolution up to 1600 x 1200  2nd Cache Memory - at 85-Hz and 2048 x 1536 at 75-Hz  System Chipset Intel 852GM GMCH/ICH4 Chipset LCD Display mode: Dual channel LVDS panel supports  BIOS AWARD® 512 kbit Flash BIOS up to UXGA panel resolution with frequency range from  System Memory 2 x 184-pin DIMM sockets, support Double Data Rate 25 MHz to 112 MHz (DDR)128 MB to 2 GB, accepts 128/256/512/1024 MB  LCD Interface 2 Channel LVDS DR200/266 DRAM  LVDS Hirose connector support up to 2 channel (2 x 18-bit)  Power Management APM 1.2, ACPI support LVDS LCD Panel  SSD Supports CompactFlash Card TYPE I/II  TV-Out (Cable optional) Support both NTSC/PAL, S-video and Composite (shared 2nd IDE Channel) Video  Watchdog Timer 255-level interval timer from 15 sec to 14835 sec,  Dual Independent CRT + LVDS setup by software, jumperless selection, generates Display system reset  Expansion Interface Support a PCI2.2 with 32-bit/33 MHz slot and Mini Mechanical and Environmental PCI interface  Dimension (L x W) 203 x 146 mm (8" x 5.75")  Battery Lithium 3 V/196 mAH  Weight 0.85 kg (weight of total package)  Operating Temperature 0 ~ 60° C (32 ~ 140° F) I/O  Operating Humidity 0% ~ 90% relative humidity, non-condensing  I/O Interface 2 x EIDE (UDMA 100), 1 x FDD (optional), 1 x K/B,  Storage Temperature -20 ~ 70° C (accessories Storage temperature: 1 x Mouse, 3 x RS232, 1 x RS232/422/485, 1 x LPT -20 ~ 60° C)  USB 6 x USB 2.0 compliant Ports  Storage Humidity 95% @ 60° C  Audio ICH4 chip. AC97 3D surround stereo sound Support Speaker out, CD-input, Line -in, Line-out, Power Microphone  Power Supply Voltage +5 V ±5%, +12 V ±5%  IrDA SIR 115 kbps, IrDA 1.1 Compliant  Power Consumption (Celeron M 600 with 256 MB DDR266)  GPIO 8-bit general purpose input/output Max: +5 V @ 2.1 A, +12 V @ 0.22 A Ethernet Typical: +5 V @ 1.75 A, +12 V @ 0.2 A  Chipset Intel 82551ER, optional 82551QM, 82540GI (Gigabit)  Speed 10/100 Mbps; 10/100/1000 Mbps (optional) Packing List  Interface 1 x RJ45 by cable  1 x PCM-9586 SBC  Standard IEEE 802.3u 100Base-T and IEEE 802.3z/ab  1 x Mini Jumper Pack (p/n:9689000002) 1000Base-T compatible.  1 x Startup Manual Built-in boot ROM in Flash BIOS (optional)  1 x Utility CD  1 x ATX Power Cable (p/n:1700000265) Stackable SBCs All product specifications are subject to change without notice Last updated : 7-Feb-2007 PCM-9586 Board Diagram Intel CeleronM processor VGAConnector DDR LVDS Connector 852GM DIMM DVIConnector Codec TVConnector FDD MiniPCI Connector 6USB2.0 LPT Super I/O Audio COM LAN LAN codec 3/4 Connector chip KB/ ICH4 Mouse COM Super IDE I/O 3/4 CF PCISlot Ordering Information LPT/ L2 TV RS/232/ Mini Thermal Operation Part No. CPU CRT LVDS 10/100 Audio USB2.0 RS-232 FDD/ CF PCISlot Cache out 422/485 PCI Solution Temp. KB/MS Celeron M PCM-9586F-M0A1E 512 KB Yes 36-bit -- 1 Yes 6 3 1 Yes Yes 1 1 Passive 0 ~ 60° C 600 MHz Celeron M PCM-9586Z-M0A1E 512 KB Yes 36-bit -- 1 Yes 6 3 1 Yes Yes 1 1 Passive -20 ~ 80° C 600 MHz PCM-9586Z2- Celeron M 512 KB Yes 36-bit -- 1 Yes 6 3 1 Yes Yes 1 1 Passive -40 ~ 85° C M0A1E 600 MHz Celeron M PCM-9586F-S0A1E 0 KB Yes 36-bit -- 1 Yes 6 3 1 Yes Yes 1 1 Passive 0 ~ 60° C 1 GHz Celeron M PCM-9586Z-S0A1E 0 KB Yes 36-bit -- 1 Yes 6 3 1 Yes Yes 1 1 Passive -20 ~ 80° C 1 GHz Optional Accessories  PCM-10586-6100E Wiring kit for PCM-9581F/PCM-9586  CF-HDD-ADP CompactFlash 50-pin to IDE 44-pin adapter  1703050306 TV-Out cable  1703100260 USB cable (26 cm)  1703100121 USB cable (12 cm)  PCM-110-00A3E 1-slot PCI riser card for 5.25" biscuits  PCM-120-00A3E 2-slot PCI riser card for 5.25" biscuits  MIO-3110-00A1E Mini PCI to USB interface connection hub  MIO-3120-00A1E Mini PCI interface to Wireless 802.11 b/g communication module  MIO-3121-00A1E Mini PCI to 4 COM Module  MIO-3140-00A1E Mini PCI interface to SATA storage moduleMIO-3150-00A1E Mini PCI interface to video capture module Online Download www.advantech.com/products IPC PCIBus

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products