Elite.Parts

Description

Advantech PCM-9581F-S0A1 CPU Board - Pentium M 1.1G SBC w/Audio,VGA,LCD,CFC

Part Number

PCM-9581F-S0A1

Price

Request Quote

Manufacturer

ADVANTECH

Lead Time

Request Quote

Category

EMBEDDED SINGLE BOARD COMPUTER » EBX & 5.25" SINGLE BOARD COMPUTER

Specifications

2nd Cache Memory

Depends on CPU type from 512 KB to 2 MB

Audio

ALC202. AC97 3D surround stereo sound; Supports Speaker out, CD-input, Line -in, Line-out, Microphone

Battery

Lithium 3 V/196 mAH

BIOS

AWARD 512 kbit Flash BIOS

CPU

Embedded Intel Pentium M (Banias/Dothan)/Celeron M; Celeron M Processor supported Pentium M 1.1 GHz; Optional:Penitum M 745 1.8 GHz @ 400 MHz FSB, Pentium M 1.6 GHz @ 400 MHz FSB

Dimension (L x W)

203 x 146 mm (8" x 5.75")

Display Chipset

Intel 855GME chip integrated. (Extreme Graphics 2)

Dual Independent Display

CRT + LVDS

Ethernet Chipset

Intel 82551ER, optional 82551QM, 82540 (Gigabit)

Ethernet Standard

IEEE 802.3u 100Base-T and IEEE 802.3z/ab 1000Base-T compatible; Built-in boot ROM in Flash BIOS

Expansion Interface

Supports a PCI2.2 with 32-bit/33 MHz slot and Mini PCI interface

GPIO

8-bit general purpose input/output

I/O Interface

2 x EIDE (UDMA 100), 1 x FDD (optional), 1 x K/B, 1 x Mouse, 3 x RS232, 1 x RS232/422/485,1 x LPT

Interface

RJ45 by cable

IrDA

SIR115 kbps, IrDA 1.1 Compliant

LCD Interface

2 Channel (2 x 18 -bit) LVDS

LVDS

Hirose connector supports up to 2 channel (36-bit) LVDS LCD Panel

Memory Size

Optimized Shared Memory Architecture, supports up to 64 MB/8 MB frame buffer using system memory

Operating Humidity

0% ~ 90% relative humidity, non-condensing

Operating Temperature

0 ~ 60° C (32 ~ 140° F)

Power Consumption

(Pentium M 1.6 G, 256 M DDR 300)-Max:+5 V @ 3.8 A, +12 V @ 0.4 A; Average:+5 V @ 3.22 A, +12 V 0.2 A

Power Management

APM 1.2, ACPI Support

Power Supply Voltage

+5 V ± 5%, +12 V ± 5%

Resolution

CRT Display mode:pixel resolution up to 1600 x 1200 at 85-Hz and 2048 x 1536 at 75-Hz; LCD Display mode:Dual channel LVDS panel support up to UXGA panel resolution with frequency range from 25 MHz to 112 MHz

Speed

10/100 Mbps

SSD

Supports CompactFlash Card TYPE I/II (shared 2nd IDE Channel)

System Chipset

Intel 855GME GMCH/ICH4 Chipset

System Memory

2 x 184-pin DIMM sockets, support ECC Double Data Rate (DDR)128 MB to 2 GB, accepts 128/256/512/1024 MB DR200/266/333 DRAM

TV-Out (Cable optional)

Supports both NTSC/PAL, S-video and Composite Video

USB

6 x USB 2.0 compliant ports

WatchDog Timer

255-level timer interval, from 15 sec to 14835 sec, setup by software, jumperless selection, generates system reset

Weight

0.85 kg (weight of total package)

Features

Embedded Intel Pentium M 1.1 GHz/Intel Celeron M 600 MHz
Extended temperature optional
Support ECC DDR Memory
Supports enhanced Intel Speedstep Technology
Supports six USB 2.0 ports
Supports up to 1000Base-T Ethernet
Supports up to two channel 48-bit LVDS interface
With Vcore 2 phase design for more stable system design

Datasheet

Advantech=PCM-9581F-S0A1=datasheet1-1532362655.pdf

107 KiB

Download

Extracted Text

Onboard Intel® Pentium® M SBC PCM-9581 with Audio, VGA/LCD Features PCI 2 x DIMM  Embedded Intel® Pentium® M 1.1 GHz, 1.6 GHz (optional)/Intel Celeron® M 600 MHz  Support ECC DDR Memory Ethernet  With Vcore 2 phase design for more stable system design 2nd IDE  Supports up to 1000Base-T Ethernet Socket 478 support Pentium M  Supports 6 x ports Host USB 2.0 LPT @ 400MHz FSB 1st IDE  Supports up to 2 channel 48-bit LVDS interface GPIO  Supports Enhanced Intel Speedstep® Technology 6 USB ATX power connector TV-out 48-bit KB/Mouse Audio 4 COM LVDS CRT  Interface RJ45 by cable Speciﬁcations  Standard IEEE 802.3u 100Base-T and IEEE 802.3z/ab 1000Base-T compatible General Built-in boot ROM in Flash BIOS  CPU Embedded Intel Pentium M (Banias/Dothan)/Celeron M Display Celeron M Processor supported Celeron M 600 MHz (512 KB) PCM-9581F-M0A1  Chipset Intel 855GME chip integrated. (Extreme Graphics 2) Pentium M 1.1 GHz PCM-9581F-S0A1,  Memory Size Optimized Shared Memory Architecture, supports up to PCM-9581FG-S0A1 64 MB/8 MB frame buffer using system memory uFCPGA2 (478 pin) PCM-9581F-00A1  Resolution CRT Display mode: pixel resolution up to 1600 x 1200 PCM-9581FG-00A1 at 85-Hz and 2048 x 1536 at 75-Hz Optional: LCD Display mode: Dual channel LVDS panel support Penitum M 745 1.8 GHz @ 400 MHz FSB up to UXGA panel resolution with frequency range from Pentium M 1.6 GHz @ 400 MHz FSB 25 MHz to 112 MHz  2nd Cache Memory Depends on CPU type from 512 KB to 2 MB  LCD Interface 2 Channel (2 x 18 -bit) LVDS  System Chipset Intel 855GME GMCH/ICH4 Chipset  LVDS Hirose connector supports up to 2 channel (36-bit)  BIOS AWARD® 512 kbit Flash BIOS LVDS LCD Panel  System Memory 2 x 184-pin DIMM sockets, support ECC Double  TV-Out (Cable optional) Supports both NTSC/PAL, S-video and Composite Data Rate (DDR)128 MB to 2 GB, accepts Video 128/256/512/1024 MB DR200/266/333 DRAM  Dual Independent CRT + LVDS  Power Management APM 1.2, ACPI Support Display  SSD Supports CompactFlash Card TYPE I/II (shared 2nd IDE Channel) Mechanical and Environmental  WatchDog Timer 255-level timer interval, from 15 sec to 14835 sec,  Dimension (L x W) 203 x 146 mm (8" x 5.75") setup by software, jumperless selection, generates  Weight 0.85 kg (weight of total package) system reset  Operating Temperature 0 ~ 60° C (32 ~ 140° F)  Expansion Interface Supports a PCI2.2 with 32-bit/33 MHz slot and Mini  Operating Humidity 0% ~ 90% relative humidity, non-condensing PCI interface  Battery Lithium 3 V/196 mAH Power  Power Supply Voltage +5 V ± 5%, +12 V ± 5% I/O  Power Consumption (Pentium M 1.6 G, 256 M DDR 300)  I/O Interface 2 x EIDE (UDMA 100), 1 x FDD (optional), 1 x K/B, Max: +5 V @ 3.8 A, +12 V @ 0.4 A 1 x Mouse, 3 x RS232, 1 x RS232/422/485,1 x LPT Average: +5 V @ 3.22 A, +12 V 0.2 A  USB 6 x USB 2.0 compliant ports  Audio ALC202. AC97 3D surround stereo sound Packing List Supports Speaker out, CD-input, Line -in, Line-out, Microphone  1 x PCM-9581 SBC  IrDA SIR115 kbps, IrDA 1.1 Compliant  1 x Mini Jumper Pack (p/n:9689000002)  GPIO 8-bit general purpose input/output  1 x Startup Manual  1 x Utility CD Ethernet  1 x ATX Power Cable (p/n:1700000265)  Chipset Intel 82551ER, optional 82551QM, 82540 (Gigabit)  Speed 10/100 Mbps (PCM-9581F), 10/100/1000 Mbps (PCM-9581FG) PC/104 Modules All product specifications are subject to change without notice Last updated : 20-Mar-2006 PCM-9581 Board Diagram Intel PentiumM processor VGAConnector DDR LVDS Connector 855GME DIMM DVIConnector Codec TVConnector FDD MiniPCI Connector LPT Super LAN LAN I/O COM 6USB2.0 chip Connector 1/2 Audio KB/ ICH4 codec Mouse IDE COM Super 3/4 I/O CF PCISlot Ordering information LPT/ L2 Giga RS- PCI Thermal Operation Part No. CPU CRT LVDS TV out 10/100 Audio USB2.0 RS-232 FDD/ CF miniPCI Cache LAN 232/422/485 Slot Solution Temp. KB/MS PCM-9581F-00A1E Socket 479 - Yes 36 bit Yes 1 -- Yes 6 3 1 Yes Yes 1 1 Active 0 ~ 60° C PCM-9581FG-00A1E Socket 479 - Yes 36 bit Yes -- 1 Yes 6 3 1 Yes Yes 1 1 Active 0 ~ 60° C LV Pentium PCM-9581F-S0A1E 1 MB Yes 36 bit Yes 1 -- Yes 6 3 1 Yes Yes 1 1 Passive 0 ~ 60° C M 1.1 GHz LV Pentium PCM-9581FG-S0A1E 1 MB Yes 36 bit Yes -- 1 Yes 6 3 1 Yes Yes 1 1 Passive 0 ~ 60° C M 1.1 GHz Celeron M PCM-9581F-M0A1E 512 KB Yes 36 bit Yes 1 -- Yes 6 3 1 Yes Yes 1 1 Passive 0 ~ 60° C 600 Optional Accessories  PCM-10586-6100 Wiring kit for PCM-9581F/9586  PCM-10586-6A00 Wiring kit for PCM-9581FG  CF-HDD-ADP CompactFlash 50 pin to IDE 44-pin adapter  1703050306 TV-out cable  1703100260 USB cable (26 cm)  1703100121 USB cable (12 cm) Online Download www.advantech.com/products LPC PCIBus

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products