PCM-9579F-J0A1E - ADVANTECH

Description

ADVANTECH PCM-9579 Series Embedded ULV Celeron 400MHz, 256KB L2 cache, CRT, 36-bit LVDS/TTL, TV-Out, 10/100 LAN, Audio, USB1.1 x4, CF, PC/104, PCI/104, PCI slot, Passive Thermal Solution, 0 ~ 60° C

Part Number

PCM-9579F-J0A1E

Price

Request Quote

Manufacturer

ADVANTECH

Lead Time

Request Quote

Category

EMBEDDED SINGLE BOARD COMPUTER » EBX & 5.25" SINGLE BOARD COMPUTER

Specifications

Audio

Realtek ALC202 AC’97 codec, AC’97 2.0 compliant, Mic-in, Line-in, CD Audio-in, Line-out, Speaker-out

Battery

Lithium 3 V/196 mAH

BIOS

AWARD® 256 kbit Flash BIOS

Cache Memory

256 KB/512 KB on ULV Celeron/LV Pentium III processor

Chipset

VIA® Twister chip with Integrated S3 Savage4 2D/3D/Video Accelerator
VT8606, VT82C686B, 133 MHz FSB

Controller

RealTek® RTL8139DL

CPU

Embedded Ultra Low Voltage Intel Celeron or Low Voltage Pentium III Processor, on-die 32 KB L1 cache memory ULV Celeron-400 (PCM-9579F-J0A1E), ULV Celeron-650 (PCM-9579F-M0A1E), LV Pentium III-933 (PCM-9579F-R0A1E)

Dimensions

203 x 146 mm (8" x 5.75") 0.85 kg (weight of total package)

Expansion Interface

PC/104-Plus (ISA & PCI) and PCI slot

I/O Chipset

2 x EIDE (Ultra DMA 100), 1 x FDD, 1 x K/B, 1 x Mouse, 1 x RS-232/422/485, 3 x RS-232, 1 x LPT

Input

RJ45 by cable

IR Interface

115 kbps, IrDA 1.1 compliant

LCD Controller

2-Channel (2 x 18-bit) LVDS interface

LCD Interface

4X AGP VGA/LCD interface, Support for 18, 24, 36-bit TFT and 16 or 24-bit DSTN panels up to SXGA resolution

Memory

8/16/32 MB frame buffer using system memory

Operating Humidity

0% ~ 90% relative humidity, non-condensing

Operating Temperature

0 ~ 60° C (32 ~ 140° F)

Power Consumption

Max.: 4.5 A @ +5 V (with 256 MB, ULV Celeron-650) Typical: 2.99 A @ +5 V (with 256 MB DRAM, ULV Celeron-400 CPU) 3.29 A @ +5 V (with 256 MB DRAM, ULV Celeron-650 CPU)

Power Management

APM 1.1, ACPI Support

Power Supply

+5 V ±5%

Processor

-20 ~ 70° C (accessories Storage temperature: -20 ~ 60° C)
Intel Celeron

Programming

95% @ 60° C

Resolutions

CRT Mode: 1280 x 1024 @ 16 bpp (60 Hz), 1024 x 768 @ 16 bpp (85 Hz), LCD/Simultaneous Mode: 1280 x 1024 @ 16 bpp (60 Hz), 1024 x 768 @ 16 bpp (60 Hz)

Speed

10/100 Mbps

SSD

CompactFlash® card Type I/II and DiskOnChip®

System Memory

SDRAM 168-pin PC/100 or 1 x 133 DIMM, Max: 512 MB

System Monitor

IEEE 802.3u 100BASE-T Fast Ethernet compatible Built-in boot ROM in Flash BIOS

TV-out

Supports both NTSC/PAL, S-video and Composite Video

USB

4 x USB ports, USB 1.1 compliant

Watchdog Timer

1 - 62 sec, 62 level interval timer, system reset or IRQ11

Features

100/133 MHz FSB and 4X AGP graphics for high performance applications
EBX form factor standard, also supports PC/104-Plus
Extended temperature optional
Fanless, 0 ~ 60° C operation (PCM-9579F-J0A1E or PCM-9579F-M0A1E)
Supports LCD backlight turn-off function
Supports Wake-on-LAN, Wake-on-Modem
ULV Intel® Celeron®, LV Intel Pentium® III SBC with CPU, Audio, VGA/LCD and Ethernet

Datasheet

PCM-9579_d-558091248s.pdf

186 KiB

Download

Extracted Text

ULV Intel® Celeron®, LV Intel Pentium® III PCM-9579 SBC with CPU, Audio, VGA/LCD and LAN Features SR PC/104+ connector KB/Mouse DOC 2000  ULV Intel® Celeron®, LV Intel Pentium® III SBC with CPU, Audio, VGA/ LCD and Ethernet USB 4 COM ULV Intel  Fanless, 0 ~ 60° C operation (PCM-9579F-J0A1E or PCM-9579F-M0A1E) FDD Celeron, LV Intel Pentium III 1st IDE UDMA/100  EBX form factor standard, also supports PC/104-Plus 2nd IDE  Supports Wake-on-LAN, Wake-on-Modem LPT  Supports LCD backlight turn-off function Ethernet  100/133 MHz FSB and 4X AGP graphics for high performance applications VGA CompactFlash  Extended temperature optional (on solder side) EBX power Backlight LCD display DIMM up to 512 MB Audio TV-out option LVDS Display Speciﬁcations  Chipset VIA® Twister chip with Integrated S3 Savage4 2D/3D/Video Accelerator General  Memory Size 8/16/32 MB frame buffer using system memory  CPU Embedded Ultra Low Voltage Intel Celeron or Low  Resolution CRT Mode: 1280 x 1024 @ 16 bpp (60 Hz), Voltage Pentium III Processor, on-die 32 KB L1 cache 1024 x 768 @ 16 bpp (85 Hz), memory ULV Celeron-400 (PCM-9579F-J0A1E), ULV Celeron-650 (PCM-9579F-M0A1E), LCD/Simultaneous Mode: 1280 x 1024 @ 16 bpp (60 Hz), LV Pentium III-933 (PCM-9579F-R0A1E) 1024 x 768 @ 16 bpp (60 Hz)  2nd Cache Memory 256 KB/512 KB on ULV Celeron/LV Pentium III  LCD Interface 4X AGP VGA/LCD interface, Support for 18, 24, processor 36-bit TFT and 16 or 24-bit DSTN panels up to SXGA  System Chipset VT8606, VT82C686B, 133 MHz FSB resolution  BIOS AWARD® 256 kbit Flash BIOS  LVDS 2-Channel (2 x 18-bit) LVDS interface  TV-Out (optional) Supports both NTSC/PAL, S-video and Composite  System Memory SDRAM 168-pin PC/100 or 1 x 133 DIMM, Max: 512 MB Video  Power Management APM 1.1, ACPI Support  Dual Independent -  SSD CompactFlash® card Type I/II and DiskOnChip® Display  Watchdog Timer 1 - 62 sec, 62 level interval timer, system reset or Mechanical and Environment IRQ11  Dimension (L x W) 203 x 146 mm (8" x 5.75")  Expansion Interface PC/104-Plus (ISA & PCI) and PCI slot  Weight 0.85 kg (weight of total package)  Battery Lithium 3 V/196 mAH  Operating Temperature 0 ~ 60° C (32 ~ 140° F) I/O  Operating Humidity 0% ~ 90% relative humidity, non-condensing  I/O Interface 2 x EIDE (Ultra DMA 100), 1 x FDD, 1 x K/B,  Storage Temperature -20 ~ 70° C (accessories Storage temperature: 1 x Mouse, 1 x RS-232/422/485, 3 x RS-232, 1 x LPT -20 ~ 60° C)  Storage Humidity 95% @ 60° C  USB 4 x USB ports, USB 1.1 compliant  Audio Realtek ALC202 AC’97 codec, AC’97 2.0 compliant, Power Mic-in, Line-in, CD Audio-in, Line-out, Speaker-out  Power Supply Voltage +5 V ±5%  IrDA 115 kbps, IrDA 1.1 compliant  Power Consumption Max.: 4.5 A @ +5 V (with 256 MB, ULV Celeron-650)  GPIO - Typical: 2.99 A @ +5 V (with 256 MB DRAM, ULV Ethernet Celeron-400 CPU) 3.29 A @ +5 V (with 256 MB DRAM, ULV Celeron-650 CPU)  Chipset RealTek® RTL8139DL  Speed 10/100 Mbps  Interface RJ45 by cable Packing List  Standard IEEE 802.3u 100BASE-T Fast Ethernet compatible  1 x PCM-9579 SBC Built-in boot ROM in Flash BIOS  1 x Mini Jumper Pack: 10 pcs (p/n: 9689000002)  1 x Startup Manual  1 x Utility CD  1 x EBX 7P-4P power cable (p/n: 1703080101) Stackable SBCs All product specifications are subject to change without notice Last updated : 7-Feb-2007 PCM-9579 Intel Board Diagram ULVprocessor VGAConnector LVDS Connector DDR VIAVT8606 DIMM TTLPanelConnector TV-out Codec FDD COM3/4 SuperI/O Audio LAN Connector LPT DOC2000 COM 1/2 VIAVT82C686B KB/ Mouse 2IDE 4 PC/104Connector USB1.1 PCI-104connector CF Ordering Information LPT/ L2 LVDS/ USB RS- RS-232/ DOC PCI-104 PC/104 PCI Thermal Operation Part No. CPU CRT TV-out 10/100 Audio FDD/KB/ CF Cache TTL 1.1 232 422/485 2000 connector connector Slot Solution Temp. MS ULV PCM-9579F-R0A1E Pentium III 512 KB Yes 36-bit Yes 1 Yes 4 3 1 Yes Yes Yes Yes Yes 1 Active 0 ~ 60° C 900 MHz ULV PCM-9579F-M0A1E Celeron 256 KB Yes 36-bit Yes 1 Yes 4 3 1 Yes Yes Yes Yes Yes 1 Passive 0 ~ 60° C 650 MHz ULVCeleron PCM-9579Z-M0A1E 256 KB Yes 36-bit Yes 1 Yes 4 3 1 Yes Yes Yes Yes Yes 1 Passive -20 ~ 80° C 650 MHz ULV PCM-9579F-J0A1E Celeron 256 KB Yes 36-bit Yes 1 Yes 4 3 1 Yes Yes Yes Yes Yes 1 Passive 0 ~ 60° C 400 MHz ULV PCM-9579Z-J0A1E Celeron 25 6KB Yes 36-bit Yes 1 Yes 4 3 1 Yes Yes Yes Yes Yes 1 Passive -20 ~ 80° C 400 MHz Optional Accessories  PCM-10586-5A00E Wiring kit for PCM-9575/9577/9579  1703100260 USB cable for PCM-9572F/9576F/9550F/9575  1703100121 USB cable for PCM-9570/9550/9576/9575 to meet MBPC-300 chassis  CF-HDD-ADP CompactFlash 50-pin to IDE 44-pin adapter  1703070101 ATX power control cable  1703050306 TV-out cable  PCM-110-00A3E 1-slot PCI riser card for 5.25" biscuits  PCM-120-00A3E 2-slot PCI riser card for 5.25" biscuits  PCM-200-00A2E PCI-104 to PCI bus module Online Download www.advantech.com/products ISABus PCIBus

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products