ADVANTECH PCM-9377F-M0A1E
Specifications
Audio
Supports AC97 Audio stereo sound
Battery
Lithium 3 V/196 mAH
BIOS
AWARD 2 Mbit Flash BIOS
Board Type
3.5 in
Cache Memory
64 KB on the processor
Chipset
VIA Mark processor
Controller
Intel 82551QM
CPU
Embedded VIA Mark CoreFusion 533/800 MHz processor, 128 MB L1 cache memory on die
Dimensions
146 x 105 mm (5.7" x 4"); 0.85 kg (weight of total package)
Display Interface
N/A. With dual simultaneous display for CRT + LVDS, CRT + TTL, CRT +TV-out (w/PCM-232)
Expansion Interface
PC/104 & Mini PCI type III
Gross Weight
8-bit general purpose Input / Output
I/O Chipset
1 x EIDE, 1 x FDD, 1 x K/B, 1 x Mouse, 1 x RS232/422/485, 1 x RS232, 1 x LPT
Input
RJ-45 connector
Memory
8/16/32 MB frame buffer using system memory
Operating Humidity
10% ~ 90% Relative Humidity, non condensing
Operating Temperature
0 ~ 60° C (32 ~ 140° F)
Pixel Size
CRT panel; LCD panel Support for 18, 24, 36-bit TTL TFT LCD panels; LVDS Interface 2-channel (two 18-bit) LVDS interface; TV-Out (optional) Supports both NTSC/PAL, S-video and Composite Video via PCM-232 TV-out module (with optional BIOS)
Power Consumption
Max:3.0 A @ +5 V (with 256 MB DRAM, VIA Mark 800); Typical:2.21 A @ +5 V (with 256 MB DRAM, VIA Mark 800)
Power Management
ACPI supported
Power Supply
AT/ATX, +5V ±5%, +12V ±5%, or supports single +5V power only
Processor
VIA Mark
Resolutions
Support for all resolutions up to 1600 x 1200
Speed
10/100 Mbps
SSD
Supports CompactFlash Card Type I/II
System Memory
SDRAM 144-pin SODIMM x1, Max. 512 MB with both PC100 and PC133 memory type
System Monitor
IEEE 802.3u (100 BASE-T) protocol compatible
USB
4 x USB ports, USB 2.0 compliant
Watchdog Timer
1 ~ 62 sec, 62-level time intervals system reset or IRQ11
Features
- 18-bit TTL and LVDS LCD display and TV-out
- 8-bit GPIO and Hardware Monitor detection
- Coast line (external connector layout) same as PCM-9373
- Mini PCI type III and PC/104 for expansion
- VIA® Mark 533/800 MHz Processor
Datasheet
Extracted Text
3.5" SBC with VIA® Mark, PCM-9377 VGA, LCD, LVDS, LAN, USB NEW Features IDE Print Port LVDS TV enable Audio Inverter Power LCD Power VIA® Mark 533/800 MHz Processor Audio Power 18-bit TTL and LVDS LCD display and TV-out Mini PCI type III and PC/104 for expansion Power Switch LCD 2 8-bit GPIO and Hardware Monitor detection Mini PCI LCD 1 Coast line (external connector layout) same as PCM-9373 USB 3/4 PC/104 USB 1/2 SMBus GPIO Power COM 2 Stand-by Power COM1 Clear COMS LAN IrDA VGA HDD & PWR LED Watchdog KB/MS CPU Fan Display Specifications Chipset VIA Mark processor Memory Size 8/16/32 MB frame buffer using system memory General Resolution Support for all resolutions up to 1600 x 1200 CPU Embedded VIA Mark CoreFusion 533/800 MHz Panel type CRT panel processor, 128 MB L1 cache memory on die LCD panel Support for 18, 24, 36-bit TTL TFT LCD 2nd Cache Memory 64 KB on the processor panels System Chipset VIA Mark processor LVDS Interface 2-channel (two 18-bit) LVDS interface BIOS AWARD® 2 Mbit Flash BIOS TV-Out (optional) Supports both NTSC/PAL, S-video System Memory SDRAM 144-pin SODIMM x1, Max. 512 MB with both and Composite Video via PCM-232 TV-out module PC100 and PC133 memory type (with optional BIOS) Power Management ACPI supported Dual Independent N/A. With dual simultaneous display for CRT + LVDS, SSD Supports CompactFlash Card Type I/II Display CRT + TTL, CRT +TV-out (w/PCM-232) WatchDog Timer 1 ~ 62 sec, 62-level time intervals system reset or IRQ11 Expansion Interface PC/104 & Mini PCI type III Mechanical and Environmental Battery Lithium 3 V/196 mAH Dimension (LxW) 146 x 105 mm (5.7" x 4") Weight 0.85 kg (weight of total package) I/O Operation Temperature 0 ~ 60° C (32 ~ 140° F) I/O Interface 1 x EIDE, 1 x FDD, 1 x K/B, 1 x Mouse, Operating Humidity 10% ~ 90% Relative Humidity, non condensing 1 x RS232/422/485, 1 x RS232, 1 x LPT USB 4 x USB ports, USB 2.0 compliant Power Audio Supports AC97 Audio stereo sound Power Supply Voltage AT/ATX, +5V ±5%, +12V ±5%, or supports single +5V GPIO 8-bit general purpose Input / Output power only Power Consumption Max: 3.0 A @ +5 V Ethernet (with 256 MB DRAM, VIA Mark 800) Chipset Intel 82551QM Typical: 2.21 A @ +5 V (with 256 MB DRAM, VIA Mark 800) Speed 10/100 Mbps Interface RJ-45 connector Standard IEEE 802.3u (100 BASE-T) protocol compatible Single Board Computers All product specifications are subject to change without notice Last updated : 7-Feb-2007 PCM-9377 Board Diagram Watch-Dog PC104 connector ISA bus CD-in , Line-in , MIC-in ALC650 AC97 CODEC Line-out connector Primary IDE connector SO-DIMM Memory bus connector Comapct flash Type-II connector VGA connector VIA PCI bus Mark Floppy connector VIA TTL Panel connector VT82C686B COM1 (RS-232) COM2 (RS232/422/485) LVDS Panel connector Print port (SPP/EPP/ECP Mode) USB2.0 connector Intel 82551QM LAN connector 10/100Mb Ethernet Keyboard & PS2 mouse connector 8 bit GPIO/ Thermal Sensor Optional Accessories Packing List PCM-232-00A1E TV out module 1 x PCM-9377 SBC FDD cable Kit 1 x Mini Jumper Pack (p/n: 9689000002) 9681000044E 1 x 26-pin to 34-pin FDD adapter 1 x Startup Manual 1701260125 1 x slim FDD cable 1 x Utility CD 1701340700 1 x 34-pin flat cable for FDD 1 x Audio Cable (p/n: 1703100152) Embedded OS 1 x IDE 44 pin cable (p/n: 1701440351) 2070000449 Image WinCE 5.0 Core Eng V1.1 PCM-9373/72 1 x USB 2 port cable (p/n: 1703100121) (19 MB) 1 x Keyboard/Mouse cable (p/n: 1700060202) 2070000450 Image WinCE 5.0 Pro Eng V1.1 PCM-9373/72 (30 MB) 1 x serial cable (p/n: 1701140201) 2070000451 Image WinCE5.0 ProPlus Eng V1.1 PCM-9373/72 1 x printer port cable (p/n: 1700260250) (32 MB) 2070000607 Image XPE SP2 V2.10 (ENG) (430 MB) 2066002300 SUSI Library V1.0 Ordering Information Part No. CRT LVDS DVI 10/100 USB RS-232 RS-232/422/485 LPT GPIO CF Mini PCI PC-104 PCM-9377F-M0A1E 1 1 1 1 4 1 1 1 4 in, 4 out 1 1 1 PCM-9377F-Q0A1E 1 1 1 1 4 1 1 1 4 in, 4 out 1 1 1 Online Download www.advantech.com/products
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the PCM-9377F-M0A1E have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods