Elite.Parts chervon right Manufacturers chervon right A chervon right ADVANTECH chervon right PCM-9372F-Q0A1
About product Specifications Features Datasheet FAQ

ADVANTECH PCM-9372F-Q0A1

Image of ADVANTECH PCM-9372F-Q0A1

Description

Advantech PCM-9372F-Q0A1 CPU Board. VIA Eden 3.5" SBC w/ VIA Eden 800 MHz CPU, VGA/LCD, LVDS, Ethernet, Audio

Part Number

PCM-9372F-Q0A1

Price

Request Quote

Manufacturer

ADVANTECH

Lead Time

Request Quote

Category

PRODUCTS - P

Specifications

2nd Cache Memory

64 KB on the Eden processor

Audio

VIA 82C686 support AC97 2.0 compliant, Mic-in, Line-in, Line-out

Battery

Lithium 3 V/196 mAH

BIOS

AWARD 256 KB Flash memory

CPU

Embedded VIA low power Eden-800 processor, 128KB L1 cache memory on die

Dimension (L x W)

145 mm x 102 mm (5.7" x 4")

Display Chipset

VIA VT8606 Twister chip with IntegratedS3 Savage4 2D/3D/Video Accelerator

Ethernet Chipset

RealTek RTL8100

Expansion Interface

PC/104

Interface

IEEE 802.3u 100BASE-T Fast Ethernet compatibleBuilt-in boot ROM in Flash BIOS

IrDA

115 Kbps, IrDA 1.1 compliant

LCD Interface

4x AGP VGA/LCD interface, Support for 9,12, 18, 24, 36-bit TFT and 16 or 24-bit DSTN panels up to SXGA resolution

LVDS

2-Channel ( 2 x 18-bit) LVDS interface

Memory Size

8/16/32 MB frame buffer using system memory

MIO

1 x EIDE (Ultra DMA100), 1 x FDD, 1 x K/B, 1 x Mouse, 1 x RS-232/422/485, 1 x RS-232, 1 x LPT

Operating Humidity

0% ~ 90% Relative Humidity, non condensing

Operating Temperature

0 ~ 60° C (32~140° F)

Power supply voltage

+5 V ± 5%, +12 V ± 5%Max. : 4.5 A @ +5 V, 1.3 A @ +12 V (Within 5 ms after power on)Typical: 2.08 A @ +5 V, 0.08 A @ +12 V (with 128 MB DRAM, Eden 400 MHz CPU) 2.33 A @ +5 V, 0.08 A @ +12 V (with 128 MB DRAM, Eden 667 MHz CPU)

Resolution

CRT Mode:1280 x 1024@16 bpp (60 Hz), 1024 x 768@ 16 bpp (85 Hz) LCD/Simultaneous Mode:1280 x 1024@ 16 bpp (60 Hz), 1024 x 768@16 bpp (60 Hz)

SSD

CompactFlash card Type I/II

System Chipset

VIA PN133T (Twister T), VIA VT82C686B

System Memory

SDRAM 144-pin SODIMM x 1, Max. 512 MBPC133 SODIMM for all model, optional PC100 SODIMM for PCM-9372-J0A1

TV-out (optional)

Supports both NTSC/PAL, S-video and Composite Video via PCM-232 TV-out module

USB

2 USB ports, USB 1.1 compliant

Watchdog Timer

1 - 62 sec, 62 level timer intervals system reset or IRQ11

Weight

0.85 kg (weight of total package)

Features

Datasheet

pdf file

ADVANTECH-PCM-9372-datasheet.pdf

158 KiB

Extracted Text

VIA Eden SBC with CPU, Audio, PCM-9372 VGA/LCD, LVDS and Ethernet EIDE UDMA/100 audio LVDS COM 2 LCD LPT Display Eden CPU on solder side SODIMM up to PC/104 512 MB connector CompactFlash™ FDD on solder side USB Ethernet COM 1 KB/mouse CRT display Banish the Heat Introduction There are several choices for dealing with thermal issues. The real estate is well-packed on this tightly designed 3.5" There are choices for heatsinks: finned, or flat, or, since the single board computer (SBC) with an onboard new VIA CPU and chipset are mounted on the solder side, you can Embedded low power Eden processor. The VIA Eden design a chassis that also serves heatsink duty. processor uses advanced 0.15µ/0.13µ CMOS technology Low power DVD player SBC with 128KB L1 cache memory and 64KB L2 cache memory The PCM-9372 supports 3D audio and complies with the on die. This board can operate without a fan at AC97 standard and 3D engine 4X AGP VGA/LCD controller temperatures up to 60° C (140° F) and typically consumes which supports DVD play. The PCM-9372 combines audio, under 12 Watts while supporting numerous peripherals. and network functions on a single board computer the This SBC includes a 4X AGP controller, an AC'97 audio same size as the 3.5" SBC form factor standard. PCM-9372 interface, a PCI Ethernet interface, and 2 channel LVDS power consumption is only 11.3 W with the Eden 400 interface. Its design is based on the 3.5" SBC form factor processor. that supports the PC/104 interface for ISA module upgrades. Other on-board features include an LPT, 2 USBs, and 2 serial ports: 1 RS-232, and 1 RS-232/422/ 485. The SSD solution supports CompactFlash™ cards Features Type I and Type II.  Embedded low power VIA Eden 400/667/800 MHz The PCM-9372 uses a VIA Twister chip with Integrated processor Savage4 2D/3D/Video Accelerator and supports 4X AGP VGA/LCD interface and up to 32 MB frame buffer using  Fanless operation at 60ºC. (PCM-9372F-J0A1 & PCM- system memory. The board is effective for use as an 9372F-M0A1) embedded controller, through its ability to add more  133MHz FSB and 4X AGP graphics for high performance custom control cards through its fast PC/104 socket. The applications PCM-9372's powerful, fanless processor choices and solid  ATA100 on primary EIDE system chipset make it a perfect core technology for medical equipment and other long life applications. www.advantech.com/epc PCM-9372  Display mode: CRT Modes: 1280 x 1024@16bpp (60Hz), Specifications 1024 x 768@16bpp (85Hz); LCD/Simultaneous Modes:  CPU: Embedded VIA low power Eden processor, 1280 x 1024@16bpp (60Hz), 1024 x 768@16bpp (60Hz) 128KB L1 cache memory on die  LVDS: Supports 2 Channel (2 x 18bit) LVDS interface Eden-400 (PCM-9372F-J0A1) Eden-667 (PCM-9372F-M0A1) Ethernet interface Eden-800 (PCM-9372F-Q0A1)  Chipset: RTL 8100  System chipset : VIA PN133T (Twister T) ,  Ethernet interface: IEEE 802.3u 100BASE-T Fast VIA VT82C686B Ethernet compatible  BIOS: Award 256 KB Flash memory  I/O address switchless setting  System memory:  Built-in boot ROM One 144pin SODIMM socket accepts 64 to 512 MB SDRAM Audio Function PC133 144pin SODIMM for all models  Chipset: VIA 82C686 Option PC100 SODIMM for PCM-9372F-J0A1  Audio controller: AC97 ver. 2.0 compliant interface  2nd cache memory: 64KB on the Eden processor  Audio interface: Microphone in, Line in, CD audio in,  Enhanced IDE interface: One channel supports up to line out, two EIDE devices. BIOS auto-detect, PIO Mode 3 or Mechanical and Environmental Mode 4, UDMA33 transfer. Primary IDE supports up to UDMA66/100 mode.  Dimensions (L x W): 145 mm x 102 mm (5.7" x 4")  FDD interface: Supports up to two FDDs  Power supply voltage: +5 V, +12V ±5%  Serial ports: Two serial RS-232 ports, COM1: RS-232,  Power requirements: COM2: RS-232/422/485 Max:  Parallel port: One parallel port supports SPP/EPP/ECP 4.5A @ +5V, 1.3A @ +12V (Within 5ms after power on) mode Typical: 2.08A @ +5V, 0.08A @ +12V (with 128 MB DRAM, Eden 400  Keyboard/mouse connector: Supports standard PC/AT MHz CPU) keyboard and a PS/2 mouse 2.33A @ +5V, 0.08A@+12V(with 128 MB DRAM, Eden 667  Power management: Supports power saving modes MHz CPU) including Normal/Standby/Suspend modes. APM 1.2  Operating temperature: 0 ~ 60° C compliant  Weight: 0.85 kg (weight of total package)  Watchdog timer: 62 level timer intervals • USB: Two universal serial bus ports, USB 1.1 compliant Ordering Information  Expansion: PC/104 connector for ISA control board ‰PCM-9372F-J0A1: Solid State Disk VIA Eden 3.5" SBC w/ VIA Eden-400MHz CPU, VGA/LCD,  Supports one 50-pin socket for CFC type I/II LVDS, Ethernet, Audio VGA/LCD Interface ‰‰‰‰‰PCM-9372F-M0A1:  Chipset: VIA Twister chip with integrated Savage4 2D/ Same as PCM-9372F-J0A1, but with Eden 667 MHz CPU 3D/Video Accelerator ‰‰‰‰‰PCM-9372F-Q0A1 (available Q4, 2002):  Frame buffer: Supports 4/8/16/32MB frame buffer with Same as PCM-9372F-J0A1, but with Eden 800 MHz CPU system memory ‰‰‰‰‰1703100260: 26cm USB cable  Interface: 4X AGP VGA/LCD interface, Support for 9, 12, ‰‰‰‰‰1703200201: ATX power cable for Biscuit SBC 15, 18, 24, 36 bit TFT and optional 16- or 24-bit DSTN ‰‰‰‰‰1961937210: Flat heat sink for PCM-9372 panel ‰‰‰‰‰1759200850: +5V Fan for PCM9372 heat sink ‰‰‰‰‰1701440500: 40-40-44 for 2.5" & 3.5" HDD IDE cable Note: All features and specifications are subject to change without notice. 2010937200MN2h

Frequently asked questions

What makes Elite.Parts unique?

chervon down
At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

What kind of warranty will the PCM-9372F-Q0A1 have?

chervon down
Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Which carriers does Elite.Parts work with?

chervon down
Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Will Elite.Parts sell to me even though I live outside the USA?

chervon down
Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

I have a preferred payment method. Will Elite.Parts accept it?

chervon down
All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

Why buy from GID?

quality

Quality

We are industry veterans who take pride in our work

protection

Protection

Avoid the dangers of risky trading in the gray market

access

Access

Our network of suppliers is ready and at your disposal

savings

Savings

Maintain legacy systems to prevent costly downtime

speed

Speed

Time is of the essence, and we are respectful of yours

What they say about us

FANTASTIC RESOURCE

star star star star star

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

star star star star star

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

star star star star star

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

star star star star star

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

star star star star star

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

star star star star star

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Related Products

product

Intel Pentium 4 P4-1.8G-400FSB Processor. 1.8GB | FSB400 | 478-pin

product

Advantech P4-2.4G-533FSB CPU Board - Intel Pentium 4 2.4GB FSB533 478-pin CPU Main Features

product

Advantech P4-2.53G-533FSB CPU Board - Intel Pentium 4 2.53GB FSB533 478-pin CPU

product

Advantech P4-2.66G-533FSB CPU Board - Intel Pentium 4 2.66GB FSB533 478-pin CPU

product

Advantech P4-2.8G-533FSB CPU Board - Intel Pentium 4 2.8GB FSB533 478-pin CPU

product

Advantech PCA-6002E2-02A1 CPU Boards - PCA-6002 Series Pentium III 500 MHz Card with 400 MHz, HISA, ...