ADVANTECH PCM-5864L-00A1
Specifications
2nd level cache
512 KB on-board Pipeline Burst SRAM
BIOS
Award 256 KB Flash BIOS
CPU
Intel Pentium MMX up to 233 MHz
Display Chipset
C&T 69000, 64-bit graphics engine with optional CST
Display memory
2MB of SDRAM on C&T 69000 (standard)
Enhanced IDE interface
One 44-pin header supports 2 IDE
Ethernet Chipset
Realtek RTL8139A
Ethernet interface
PCI 100/10 Mbps Ethernet controller. IEEE
FDD interface
Supports up to two FDDs
Flat panel performance
36-bit direct interface to mono, STN,
I/O bus expansion
One 32-bit PCI bus expansion slot
Infared port
Supports up to 4 Mbps transfer rate (FIR)
Keyboard/mouse connector
10-pin header connector for
Max. power requirements
7 A @ 5 V (4.75 ~ 5.25 V)
Operating temperature
0 ~ 60° C
Parallel port
One parallel port supports SPP/EPP/ECP parallel
PC/104 expansion
104-pin 16-bit
Processor
Intel Pentium MMX
RAM
One 168-pin DIMM socket accepts 8 ~ 128 MB SDRAM
Serial port
Four serial ports:
Size
203 mm x 146 mm (8" x 5.75")
Solid State Disk
Supports one 50-pin socket for Compact Flash card
System chipset
SiS 5582
Typical power consumption
4.5 A @ 5 V with AMD K6-2/333,
USB interface
Two USB connectors with fuse protection.
Watchdog timer
Software enabled/disabled. 0 ~ 63 sec.
Weight
0.27 kg (0.59 lbs) (Bare)
Features
- 18-bit LVDS interface (PCM-5864 only)
- 32-bit PCI-bus 100/10 Mbps Ethernet interface
- 32-bit PCI-bus VGA/LCD controller supports 36-bit LCD panels
- 4 serial ports: three RS-232 and one RS-232/422/485
- AC97 PCI surround audio interface, video-in and video-out
- Accepts Intel Pentium, MMX, AMD , K6; K-62; and IDT WinChip
- expansion capabilities
- interface (PCM-5864 only)
- processors
- USB interface, FIR, PCI slot, and PC/104 connector for flexible
- Watchdog timer with jumperless selection
Datasheet
Extracted Text
® Pentium MMX SBC with Video, Audio, VGA/LCD and Ethernet PCM-5864/L Ethernet DIMM up to PCI slot 128 MB Video-in 100Base-T Audio connector Power connector Keyboard/mouse SiS connector chipset FDD interface Enhanced IDE interface ® Intel Pentium , Award ® Pentium MMX, BIOS AMD K6, K6-2 processor Parallel port Video-out Two USB FIR connectors CRT display COM1 - COM4 connector Flat panel display LCD controller on chip connectors 2 MB memory True multimedia SBC Introduction ® The PCM-5864 is a highly integrated multimedia SBC that The PCM-5864/5864L is an all-in-one true multimedia Pentium combines audio, video-in and TV-out, and network functions on a processor-based single board computer (SBC) with a 32-bit audio single computer board the size of a 5.25" floppy drive. It provides controller and video input/output (PCM-5864 only), a PCI SVGA PCI 32-bit full-duplex, integrated 3D surround audio which controller, a 18-bit LVDS interface, a PCI Ethernet interface and ® complies with the AC97 standard, video capture that supports RCA one PCI expansion slot. When using an Intel Pentium MMX connectors and S-Video connectors via optional cable kit, and processor, the PCM-5864/5864L achieves outstanding video-out function which supports NTSC and PAL formats. performance that surpasses any other SBC in its class. This compact (only 5.75" x 8") unit offers all the functions of a single Features board industrial computer, but still fits in the space of a 5.25" ® , floppy drive. • Accepts Intel Pentium MMX, AMD , K6; K-62; and IDT WinChip processors On-board features include 512 KB 2nd level cache, four serial ports (three RS-232, one RS-232/422/485), one multi-mode • 32-bit PCI-bus VGA/LCD controller supports 36-bit LCD panels parallel (ECP/EPP/SPP) port, two USB (Universal Serial Bus) • 18-bit LVDS interface (PCM-5864 only) ports, an FIR (IrDA), a floppy drive controller and a keyboard/PS/2 • 32-bit PCI-bus 100/10 Mbps Ethernet interface mouse interface. The built-in high speed PCI IDE controller supports both PIO and bus master modes. Up to two IDE devices • AC97 PCI surround audio interface, video-in and video-out can be connected, including large hard disks, CD-ROM drives and interface (PCM-5864 only) tape backup drives. • 4 serial ports: three RS-232 and one RS-232/422/485 The PCM-5864/5864L features 100/10Base-T Ethernet and • USB interface, FIR, PCI slot, and PC/104 connector for flexible supports 36-bit XGA LCD panels. A standard 2 MB of VGA expansion capabilities memory is included on the C & T LCD controller 69000 chip. The PCM-5864/5864L also supports 24-bit LVDS interface for long • Watchdog timer with jumperless selection distance data transmission with good EMI safeguards. Note: All specifications are subject to change without notice PCM-5864/L Audio function (PCM-5864 only) Specifications • Chipset: Creative ES1371 Standard SBC functions • Audio controller: 32-bit, Sound Blaster Pro compatible ® • CPU: Intel Pentium MMX up to 233 MHz • Sound quality: AC97 full-duplex, integrated 3D audio AMD K6-2 up to 333 MHz • Audio interface: Mic in, Line in, CD audio in, Line out, Speaker IDT WinChip out • BIOS: Award 256 KB Flash BIOS Video-in/Video-out (PCM-5864 only) • System chipset: SiS 5582 • Chipset: Philips SDA 7111A, Analog Device 725AR • 2nd level cache: 512 KB on-board Pipeline Burst SRAM • Connectors: 8-pin (video-in), 6-pin (video-out) header • RAM: One 168-pin DIMM socket accepts 8 ~ 128 MB SDRAM connector via optional cable connect to S-Video and RCA • Enhanced IDE interface: One 44-pin header supports 2 IDE connector devices, supports PIO mode 3,4, Ultra PMA133 mode • Format: NTSC or PAL, YUV 422 quality with RGB 16 format. • FDD interface: Supports up to two FDDs Supports live video capture up to 10 ~ 15 fps at 320 x 240 • Parallel port: One parallel port supports SPP/EPP/ECP parallel resolution mode LVDS interface (PCM-5864 only) • Serial port: Four serial ports: • Chipset: TI SN75LVDS81 or NS DS90CR5803 COM1, 3, 4: RS-232 • Performance: 24 low-voltage TTL data channels plus clock-in COM2: RS-232/422/485 and 3 low-voltage differential data channels plus clock-out. 3.3 • Watchdog timer: Software enabled/disabled. 0 ~ 63 sec. volt and 250 mW (typ.). Meets ANSI EIA/TIA-644 selectable • Data transmitting distance: Over 10 meters • Keyboard/mouse connector: 10-pin header connector for PCI Bus Ethernet Interface keyboard and PS/2 mouse • Chipset: Realtek RTL8139A • USB interface: Two USB connectors with fuse protection. • Ethernet interface: PCI 100/10 Mbps Ethernet controller. IEEE Complies with USB Spec. Rev. 1.0 802.3U protocol compatible • Infared port: Supports up to 4 Mbps transfer rate (FIR) Solid State Disk • Supports one 50-pin socket for Compact Flash card • PC/104 expansion: 104-pin 16-bit PC/104 module connector Mechanical and environmental • I/O bus expansion: One 32-bit PCI bus expansion slot • Max. power requirements: 7 A @ 5 V (4.75 ~ 5.25 V) PCI CRT/Flat Panel interface • Typical power consumption: 4.5 A @ 5 V with AMD K6-2/333, • Chipset: C&T 69000, 64-bit graphics engine with optional CST 64 MB DIMM 69030 • Operating temperature: 0 ~ 60° C • Flat panel performance: 36-bit direct interface to mono, STN, (32 ~ 140° F) DSTN & TFT panels. Advanced power management. • Size: 203 mm x 146 mm (8" x 5.75") . supports 3.3V or 5V Flat panel display • Weight: 0.27 kg (0.59 lbs) (Bare) • Display mode: Flat panel: up to 800 x 600 @ 24 bpp Ordering Information 1024 x 768 @ 16 bpp ® 1280 x 1024 @ 8 bpp q PCM-5864-00A1: Pentium MMX SBC with Video, Audio, VGA/LCD, LVDS and Ethernet CRT display: up to 800 x 600 @ 24 bpp q PCM-5864L-00A1: Same as PCM-5864-00A1, but without 1080 x 768 @ 16 bpp audio, video-in, video-out, LVDS functions 1280 x 1024 @ 8bpp q PCM-10586-3000: PCM-5864 wiring kit • Display memory: q PCM-1700100170: USB Cable for PCM-5864/L 2MB of SDRAM on C&T 69000 (standard) q PCM-110: PCI Riser Card, 1 x slot 4MB of SDRAM on C&T 69030 (optional) q PCM-120: PCI Riser Card, 2 x slot 2010586400 MN181 Note: All specifications are subject to change without notice
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the PCM-5864L-00A1 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods