ADVANTECH PCI-1710HG-B

Description
100KS/s, 12-bit High Gain Multifunction Card
Part Number
PCI-1710HG-B
Price
Request Quote
Manufacturer
ADVANTECH
Lead Time
Request Quote
Category
OTHER PERIPHERALS
Features
- 12-bit A/D converter, with up to 100 kHz sampling rate
- 16 digital inputs and 16 digital outputs
- 16 single-ended, 8 differential or a combination of analog inputs
- Automatic channel/gain scanning
- BoardIDâ„¢ Switch
- Onboard FIFO memory (4096 samples)
- Onboard programmable counter
- Programmable gain
- Two 12-bit analog output channels
Datasheet
Extracted Text
100 KS/s, 12-bit, PCI-bus PCI-1710/1710L Multifunction Card 100 KS/s, 12-bit, (High-gain), PCI-1710HG/HGL PCI-bus Multifunction Card 1 IPPC & AWS Features § 16 single-ended, 8 differential or a combination of analog inputs. 2 § 12-bit A/D converter, with up to 100 KHz sampling rate TPC § Programmable gain for each input channel § Free combination of single-ended and differential inputs 3 § On-board 4 K samples FIFO buffer FPM § Two 12-bit analog output channels § 16 digital inputs and 16 digital outputs 4 ATM § Programmable pacer/counter § Board ID § Short circuit protection 5 DA&C PCI-1710/1710L/1710HG/1710HGL PCLD-8710 6 cPCI 7 Introduction ADAM-3000 The PCI-1710/1710L/1710HG/1710HGL is a multifunction card for the PCI bus. Its advanced circuit design provides higher quality and more functions, including the five most desired measurement and control functions: 12-bit A/D conversion, D/A conversion, digital input, digital output, and counter/timer. 8 eConnectivity § Accuracy (depends on gain) Specifications * S.E.: Single-ended D: Differential 9 ICOM Analog Input PCI-1710/1710L PCI-1710HG/1710HGL § Channels 16 single-ended or 8 differential Gain Accuracy Gain Accuracy Remar.k (software programmable) 10 0.5, 1 0.01% of FSR ±1 LSB 0.5, 1 0.01% of FSR ±1 S.E./D Software § Resolution 12-bit LSB § On-board FIFO 4 K samples 2 0.02% of FSR ±1 LSB 5, 10 0.02% of FSR ±1 S.E./D § Conversion Time 8 ms LSB 11 UNO-2000/3000 § Maximum Input ±30 V 4 0.02% of FSR ±1 LSB 50, 100 0.04% of FSR ±1 D Overvoltage LSB § Input Range (V, software programmable) 8 0.04% of FSR ±1 LSB 500, 1000 0.08% of FSR ±1 D 12 LSB VBOX Model PCL-1710/1710L PCI-1710HG/1710HGL ±10, ±5, ±1, ±0.5, ±0.1 ±0.05, ±0.01, Bipolar ±10, ±5, ±2.5, ±1.25, ±0.625 ±0.005 § Linearity Error ±1 LSB 13 0 ~ 10, 0 ~ 5, 0 ~ 2.5, 0 § Input Impedance 1 GΩ Unipolar 0 ~ 10, 0 ~ 1, 0 ~ 0.1, 0 ~ 0.01 ADAM-4000 ~ 1.25 § Trigger Mode Software, onboard programmable pacer or external § Common Mode Rejection Ratio (CMRR) Analog Output (PCI-1710/1710HG only) 14 ADAM-5000 PCI-1710/1710L PCI-1710HG/1710HGL § Channels 2 Gain CMRR Gain CMRR § Resolution 12-bit 0.5, 1 75 dB 0.5, 1 75 dB § Relative Accuracy ±1/2 LSB 15 2 80 dB 10 90 dB ADAM-6000 § Gain Error ±1 LSB 4 84 dB 100 106 dB § Throughput 38 KS/s (min.) 8 84 dB 1000 106 dB § Slow Rate 10 V/ms 16 § Maximum Sampling Rate (S/s, depending on PGIA settling time) § Output Range Internal reference: 0 ~ +5 V @ -5 V, ADAM-8000 Model Gain Max. Sampling Rate (software programmable) 0 ~ +10 V @ -10 V PCI-1710/1710L 0.5, 1, 2, 4, 8 100 KS/s External reference: 0 ~ +x V @ -x V (-10 ≤ x ≤10) 0.5, 1 100 KS/s § Driving Capability 10 mA 5, 10 35 KS/s PCI-1710HG/1710HGL 20, 100 7 KS/s Digital Input 500, 1000 770 S/s § Channels 16 Note: The sampling rate depends on the computer hardware architecture and software § Input Voltage Low: 0.4 V max. environment. The rates may vary due to programming language, code efficiency, High: 2.4 V min. CPU utilization and so on. § Input Load: Low: -0.2 mA @ 0.4 V High: 20 mA @ 2.7 V Plug-in DA&C Cards Online Download www.advantech.com/products 5-10 5-11 PCI-1710/1710L PCI-1710HG/HGL 1 Specifications Cont. Feature Details IPPC & AWS Features PCI-1710 series provide specific functions for different user requirements: Digital Output PCI-1710 100 KS/s, 12-bit Multifunction Card § Channels 16 2 PCI-1710L 100 KS/s, 12-bit Multifunction Card w/o AO TPC § Output Voltage Low: 0.4 V max. @ 8.0 mA (sink) High: 2.4 V min. @ -0.4 mA (source) PCI-1710HG 100 KS/s, 12-bit High-Gain Multifunction Card PCI-1710HGL 100 KS/s, 12-bit High-Gain Multifunction Card w/o AO 3 Programmable Timer/Counter FPM § Counter Chip 82C54 or equivalent Mixed Single-ended or Differential Analog Inputs § Counters 3 channels, 16 bits, 2 channels are permanently The PCI-1710/1710HG features an automatic channel/gain scanning circuit. The circuit, 4 configured as a 32-bit programmable pacer; 1 channel rather than your software, controls multiplexer switching during sampling. The onboard ATM is free for user applications SRAM stores different gain values and configurations for each channel. This design lets § Input, gate TTL/CMOS compatible you perform multi-channel high-speed sampling (up to 100 KHz) with different gains for § Time Base Channel 1: 10 MHz 5 each channel and allows free combination of single-ended and differential inputs. DA&C Channel 2: Takes input from output of channel 1 Channel 0: Internal 1 MHz or external clock On-board FIFO (First In First Out) Memory (10 MHz max.) selected by software. The PCI-1710/1710/1710HG/1710HGL has an on-board FIFO buffer that can store up 6 cPCI General to 4 K A/D samples. The PCI-1710/1710HG generates an interrupt when the FIFO is half full. This feature provides continuous high-speed data transfer and more predictable § CE certified to CISPR 22 class B performance on Windows systems. § I/O Connector 68-pin SCSI-II female connector 7 ADAM-3000 § Power Consumption +5 V @ 850 mA (Typical), On-board Programmable Counter +5 V @ 1.0 A (Max.) The PCI-1710/1710/1710HG/1710HGL provides a programmable counter to generate a § Operating Temperature 0 ~ 60° C (32 ~ 140° F) (refer to IEC 68-2-1, 2) 8 pacer trigger for the A/D conversion. The counter chip is an 82C54 or equivalent, which § Storage Temperature -20 ~ 70° C (-4 ~ 158° F) eConnectivity includes three 16-bit counters on a 10 MHz clock. One counter is used as an event counter § Operating Humidity 5 ~ 95% RH non-condensing (refer to IEC 68-2-3) for counting events coming from the input channels. The other two are cascaded together § Dimensions (L x H) 175 x 100 mm (6.9" x 3.9") to make a 32-bit timer for a pacer trigger. 9 § MTBF Over 64,770 hrs @ 25° C, grounded-fix environment ICOM Special Shielded Cable for Noise Reduction The PCL-10168 shielded cable is specially designed for the PCI-1710/1710HG to reduce Ordering Information 10 noise in the analog signal lines. Its wires are all twisted pairs, and the analog lines and Software § PCI-1710 100 KS/s, 12-bit Multifunction Card, user’s manual and digital lines are separately shielded, providing minimal cross talk between signals and driver CD-ROM. (cable not included) great protection against EMI/EMC problems. § PCI-1710L 100 KS/s, 12-bit Multifunction Card w/o AO, user’s 11 manual and driver CD-ROM. (cable not included) UNO-2000/3000 § PCI-1710HG 100 KS/s, 12-bit High-Gain Multifunction Card, user’s Pin Assignments manual and driver CD-ROM. (cable not included) 12 § PCI-1710HGL 100 KS/s, 12-bit High-Gain Multifunction Card w/o VBOX AO, user’s manual and driver CD-ROM. (cable not included) § PCLD-8710 Industrial Wiring Terminal Board with CJC circuit for 13 ADAM-4000 DIN-rail mounting (cable not included) § PCL-10168 68-pin SCSI-II cable with male connectors on both ends and special shielding for noise reduction, 1 m. 14 § PCL-10168-2 68-pin SCSI-II cable with male connectors on both ADAM-5000 ends and special shielding for noise reduction, 2 m. § ADAM-3968 68-pin SCSI-II Wiring Terminal Board for DIN-rail 15 Mounting ADAM-6000 16 ADAM-8000 Plug-in DA&C Cards Online Download www.advantech.com/products 5-10 5-11
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the PCI-1710HG-B have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods