ADVANTECH MIC-5401
Specifications
AMC Module
Single width, mid-size form factor (full-size front panel available as an option)
Montior
Power-on hour counter. Voltage: 12 V, 5 V, and 3.3 V management power. Temperature: two on-board locations
Sotrage Drive Supported
2.5" SAS or SATA hard disk drives, or 2.5" SATA SSD (solid state drive)
Standards
PICMG 3.0 R2.0, AMC.0 R2.0, AMC.3 R1.0, IPMI1.5, and SCOPE AdvancedMC Hardware Profile V1.0
Thermal Sensor
LM75/DS75 (x2)
Watchdog
AMC compliant watchdog
Features
- 3.0 Gb/s interface speed support
- AdvancedTCA and MicroTCA compatible
- Dual port SAS drive support
- Hot-swap capable
- HPM.1 compliant firmware upgrade and rollback support through IPMB
- Power-on hour counter
- SAS or SATA 2.5" hard disk drive compatible
- Single-width mid-size AMC form factor
- System management compliant to PICMG3.0 R2.0, AMC.0 R2.0, AMC.3 R1.0, and IPMI1.5
- Two thermal sensors to monitor on-board temperatures
Datasheet
MIC-540-20794352671.pdf
313 KiB
Extracted Text
Advanced Mezzanine Card MIC-5401 SAS/SATA Storage AMC NEW Features Single-width mid-size AMC form factor SAS or SATA 2.5" hard disk drive compatible Hot-swap capable AdvancedTCA and MicroTCA compatible Dual port SAS drive support 3.0 Gb/s interface speed support Two thermal sensors to monitor on-board temperatures System management compliant to PICMG3.0 R2.0, AMC.0 R2.0, AMC.3 R1.0, and IPMI1.5 Power-on hour counter HPM.1 compliant firmware upgrade and rollback support through IPMB RoHS COMPLIANT 2002/95/EC Introduction The Advantech MIC-5401 is a single-width/mid-size Advanced Mezzanine Card (AMC) designed to support a 2.5" SAS or SATA hard disk drive to work as an enterprise storage module on an ATCA platform or in a MicroTCA shelf. The 2.5" hard disk drive is connected to the AMC port 2 (SAS and SATA) and port 3 (SAS only) according to the AMC.3 specifications. Dual port SAS drives may be used on the MIC-5401 to increase the interface bandwidth of failover support between dual hosts in fault tolerant environments. Like all other standard AMC modules, an IPMI-based module management controller (MMC) is also implemented on the MIC-5401 to serve as a communication interface to the Carrier Management Controller on an ATCA platform, or to the MicroTCA Carrier Management Controller on the MicroTCA Carrier Hub in a MicroTCA shelf. As a local IPMI controller on the AMC, it manages all hot-swap activities, E-keying, and hardware heath monitoring such as voltages (12V, 5V, and management power 3.3V) and on-board temperatures (including hard disk drive’s ambient temperature). The MIC-5401’s mechanical design is optimized for a maximum of shock and vibration durability combined with a user- and service friendly mounting process for the disk drive. Specifications AMC Module Single width, mid-size form factor (full-size front panel available as an option) Storage Device Supported 2.5" SAS or SATA hard disk drives, or 2.5" SATA SSD (solid state drive) PICMG 3.0 R2.0, AMC.0 R2.0, and IPMI 1.5 compliant System Management Redundant firmware images based on Pigeon Point Systems’ solution supporting HPM.1 compliant upgrades and manual/automatic rollback Power-on hour counter Monitor Voltage: 12 V, 5 V, and 3.3 V management power Temperature: two on-board locations Watchdog AMC compliant watchdog Thermal Sensor LM75/DS75 (x2) Temperature and humidity GR-63-CORE, Issue 3, R4-7 (-5° C ~ 55° C; 5% ~ 95%RH) (operating) Temperature and humidity GR-63-CORE, Issue 3, R4-7 (-40° C ~ 70° C; 95%RH) (non-operating) Altitude GR-63-CORE, Issue 3, R4-8, R4-9, R4-10, R4-11, R4-12 (-60 m ~ 4000 m) Environmental Conditions 2 Vibration (operating) IEC 60068-2-64 (0.002G /Hz, 1 Grms, 5 ~ 500 Hz) Vibration (non-operating) IEC 60068-2-6 (2 G, 5 ~ 500 Hz, 1 Octave/min) Shock (operating) IEC 60068-2-27 (half-Sine, 10 G, 11 ms) Shock (non-operating) IEC 60068-2-27 (half-Sine, 30 G, 11 ms) Conformance UL94V0, FCC Class B, CE, RoHS & WEEE compliant Regulatory NEBS Level 3 Designed for GR-63-CORE and GR-1089-CORE Compliance Standards PICMG 3.0 R2.0, AMC.0 R2.0, AMC.3 R1.0, IPMI1.5, and SCOPE AdvancedMC Hardware Profile V1.0 MIC-5401 Block Diagram GPIO Latch Module Buffer Management IPMB-L Control Control 2.5" SAS/SATA Hard Disk Drive Status Local or DC/DC 2.5" SSD Drive Payload Power (12V) Converter Power (5V) Port3 Seccondary SAS SATA/Primary SAS Port 2 Ordering Information Model Number Front Panel MIC-5401-0000E Mid-Size Note: 1. AMC modules with pre-installed hard disk or solid state disk drives are available on request. Please contact Advantech sales representative for further detail. 2. Full size front panel is available on request. Online Download www.advantech.com/products Mechanical Adapter
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the MIC-5401 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods