ADVANTECH MIC-3716/3
Description
3U, 250 kS/s, 16-bit, 16-ch
High-Resolution Multifunction Card
Part Number
MIC-3716/3
Price
Request Quote
Manufacturer
ADVANTECH
Lead Time
Request Quote
Category
PRODUCTS - M
Specifications
Accuracy Relative
±1LSB
Channels
16 single-ended, 8 differential, or combination Resolution 16 bits
16, 5V/TTL
Driving Capability
±20 mA
FIFO Size
1024 samples/ch
Input Impedance
100 MO/10 pF (Off); 100 MO/100 pF (On)
Input Voltage Logic 0
0.4 V max.
Logic 1
2.4 V min.
2.7 V min.
Max. Sampling Rate
250 kS/s
Operation Mode
Single output
Output Capability Sink
0.4 V max. @ +8 mA
Output Impedance
0.1 O max.
Output Voltage Logic 0
0.4 V max.
Overvoltage Protection
30 Vp-p
Sampling Modes
Software, pacer, or external
Slew Rate
20 V/µs
Source
2.4 V min. @ -0.4 mA
Features
- 16 analog input channels with 1K FIFO
- 16 digital input channels
- 16 digital output channels
- 16 S.E. or 8 Diff. AI, or a combination
- 16-bit high resolution
- 2 analog output channels (PCI-1716 only)
- 250 KS/s sampling rate
- Auto calibration function
- Board ID
- One 10 MHz 16-bit resolution counter
- PCI-bus mastering for data transfer
- Unipolar/Bipolar input range
Datasheet
Advantech-MIC-3716-Datasheet-1713552870.pdf
141 KiB
Extracted Text
250 kS/s, 16-bit, 16-ch CPCI Multifunction MIC-3716 Card 30 MS/s, Simultaneous 4-ch Analog Input MIC-3714 CPCI Card 16-bit, 8-ch Non-isolated Analog Output MIC-3723/3723R CPCI Cards MIC-3716/3 MIC-3714/3 MIC-3723R/3 MIC-3723/3 Specifications Specifications Specifications Analog Input Channels 16 single-ended, 8 differential, or Analog Input Analog Output combination Resolution 16 bits Channels 8 Channels 4 single-ended channels Max. Sampling Rate 250 kS/s Resolution 16 bits Resolution 12 bits FIFO Size 1024 samples/ch Overvoltage Protection 30 Vp-p Output Rate Static update Max. Sampling Rate 30 MS/s (Only in FIFO Input Impedance 100 MΩ/10 pF (Off); 100 MΩ/100 pF (On) Output Range (V, software 32k) Sampling Modes Software, pacer, or external programmable) Input Range FIFO Size 32,768 samples/ch Overvoltage Protection 30 Vp-p Bipolar Unipolar ±10 V ±10 ±5 ±2.5 ±1.25 ±0.625 Internal Unipolar - 0 ~ 10 0 ~ 5 0 ~ 2.5 0 ~ 1.25 Input Impedance 50 Ω/1 MΩ/jumper Reference Current Loop 0 ~ 20 mA, 4 ~ 20 mA Accuracy (% of FSR ±1LSB) 0.15 0.03 0.03 0.05 0.1 selectable, 100 pF Slew Rate 20 V/µs Analog Output Sampling Modes Software, pacer, post- Driving Capability 5mA Channels 2 trigger, pre-trigger, delay- Resolution 16 bits Output Impedance 0.1 Ω max. trigger, about-trigger Output Rate Static update Operation Modes Single output, synchronized Output Range Input Range (V, software output Internal Bipolar ±5, ±10 programmable) Reference Unipolar 0 ~ 5, 0 ~ 10 Digital Input/Output 0 ~ +x V @ +x v (-10 ≤ x ≤ 10) General External Reference Channels 16, 5V/TTL -x ~ +x V @ +x v (-10 ≤ x ≤ 10) Slew Rate 20 V/µs Bus Type CompactPCI Input Voltage Logic 0: 0.8 V max. Driving Capability ±20 mA I/O Connectors 4 x BNC connector (for Logic 1: 2.0 V min. Output Impedance 0.1 Ω max. AI) Output Voltage Logic 0: 0.5 V max. @ 24 mA Operation Mode Single output Logic 1: 2.4 V min. @ -15 mA Accuracy Relative: ±1LSB 1 x PS/2 connector (for Output Capability Sink: 0.5 V max. @ 24 mA ext. colock and trigger) Digital Input/Output Source: 2.4 V min. @ -15 mA Channels 16, 5V/TTL Dimensions (L x H) 160 x 100 mm (6.3" x Input Voltage Logic 0: 0.4 V max. 3.9") with 3U bracket Logic 1: 2.4 V min. General Output Voltage Logic 0: 0.4 V max. Power Consumption Typical: +3.3 V @ 550 mA PICMG Compliance CompactPCI V2.0, R 2.1 Logic 1: 2.7 V min. , +5 V @ 150 mA , Output Capability Sink: 0.4 V max. @ +8 mA Hot-Swap V2.1, R 2.0 +12 V @ 600 mA Source: 2.4 V min. @ -0.4 mA Bus Type CompactPCI Max.: +3.3 V @ 850 mA, Counter/Timer I/O Connector Type 68-pin SCSI-II female +5 V @ 200 mA, Channels 3 Dimensions 160 x 100 mm (6.9" x 3.9") +12 V @ 700 mA Applications with 3UBracket Compatibility 5 V/TTL Operating Temperature 0 ~ 70° C (32~158° F) Power Consumption Typical: 5 V @ 850, 12 V @ Resolution 16 bits Storing Temperature -20 ~ 85° C (-4 ~ 185° F) Max. Input Frequency 1 MHz 600 mA Reference Clock Internal 10 MHz Storing Humidity 5 ~ 95% RH, Certifications CE External Clock Frequency 10 MHz non-condensing (refer to External Voltage Range TTL (Low: 0.8, IEC 68-2-3) High: 2 V) Certifications CE and FCC certified General Ordering Information PICMG Compliance CompactPCI V2.0, R 2.1 Hot-Swap V2.1, R MIC-3723/3 3U CompactPCI 16-bit, 8-ch 2.0 Bus Type CompactPCI non-isolated analog output Ordering Information I/O Connector Type 68-pin SCSI-II female card Dimensions 160 x 100 mm (6.9" x 3.9") with 3U Bracket MIC-3714/3 3U, 30 MS/s MIC-3723R/3 3U CompactPCI 16-bit, 8-ch Power Consumption Typical: +5 V @ 850 mA, +12 V @ 600 mA non-isolated analog output Simultaneous 4-ch Max.: +5 V @ 1 A, +12 V @ 700 m A card with Rear I/O support Certifications CE Analog Input Card PCL-10168-1 68-pin SCSI-II cable with ADAM-3909 DB-9 Wiring Terminal for male connectors on both Ordering Information DIN-rail Mounting PCL-10168-2 ends and special shielding for MIC-3716/3 3U, 250 kS/s, 16-bit, 16-ch PCL-10901-1 PS2 to DB-9 wiring cable, noise reduction, 1 and 2 m High-Resolution Multifunction Card 1 m PCLD-8710 Industrial Wiring Terminal Board with CJC ADAM-3968 68-pin SCSI-II Wiring circuit for DIN-rail Mounting. (cable not PCL-10901-3 PS2 to DB-9 wiring cable, Terminal Board for DIN-rail included) 3 m mounting PCL-10168 68-pin SCSI-II cable with male connectors PCL-1010B-1 BNC to BNC wiring cable, on both ends and special shielding for noise reduction, 1 and 2 m 1 m ADAM-3968 68-pin SCSI-II Wiring Terminal Board for DIN-rail Mounting Online Download www.advantech.com/products
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the MIC-3716/3 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods