® 6U CompactPCI Pentium III/II SBC with SCSI/DUAL LAN/VGA MIC-3376 Features w Accepts slot 1 processors, including Pentium III and Pentium II w Intel 440BX chipset w Single/dual PCI-to-PCI bridge drive up to 7 or 14 CompactPCI slots w Supports Ultra2 Wide SCSI interface w Dual on-board 10/100 Base-TX fast Ethernet with RJ-45 connectors w On-board high-performance AGP VGA display w Connection to four Ultra DMA/33 high speed IDE devices through J3 connector w Accepts CompactFlash memory card w Two DIMM sockets support up to 512 MB SDRAM, support ECC Introduction The MIC-3376 is a 6U CompactPCI single board computer. Targeting Complete I/O Functions the performance demanding applications, the MIC-3376 accepts The MIC-3376 offers all I/O functions of an industrial computer Pentium III/II processors up to 550 MHz to provide optimum with the rugged Eurocard form factor. All I/O connectors are computing capability. Based on Intel 440BX chipset, the MIC-3376 available on the front panel containing two fast-Ethernet interfaces, enhance its performance with 100 MHz front side bus. two serial ports, two USB ports, one VGA connector, one SCSI High Performance Pentium III Processor ® The MIC-3376 accepts an Intel slot 1 Pentium III or Pentium II processor. With support of 66 and 100 MHz CPU bus clock and CPU’s integrated 512 KB L2 cache memory, the MIC-3376 can fullfill customer’s requirement on high-performance computing capability. Compact 2-slot Design The MIC-3376 has rich functions on a single board with only two-slot width. Advantech provides a CPU heat sink specially designed for the SECC 2 Pentium III/II processor, and MIC-3376 can operate without cooling fan on the heat sink. The MIC-3376 needs only the external cooling air from the chassis fans for ventilation. This enables the MIC-3376 to use Pentium III/II CPU but still within a 2-slot wide space. On-board SCSI, Dual LANs and Dual PCI-to-PCI Bridges An Ultra2 wide SCSI interface is optionally available on the front panel. It provides connection to external RAID system and other SCSI devices with data transfer rate up to 80 MB/s. The dual on-board fast Ethernet channels provide teaming functions like Adapter Fault ® Tolerance, Adaptive Load Balancing and Fast EtherChannel to increase transmission throughput and reliability. The MIC-3376 also provides single/dual PCI-to-PCI bridge options to drive up to 7/14 CompactPCI slots. MIC-3376 interface, one parallel port, and one PS/2 keyboard/mouse connector. AGP VGA Interface Also located on the front panel are the reset button and LEDs for • Controller: Intel C&T 69000 power status, HDD operation, SCSI operation, and Ethernet • AGP 1.0 compliant, 66MHz. communication. • Display memory: 2 MB on-chip SDRAM. The built-in high speed PCI IDE controller provides two seperate IDE • Display resolution: Supports non-interlaced CRT monitor channels with Ultra DMA/33 mode. The user defined J3 connector is resolutions up to 1280 x 1024 @ 256 colors, 16 million colors up defined to support up to four IDE devices and two FDDs. These to 800 x 600 drives can simply be connected to the backplane or to the rear transition board for easy service and maintenance. Ultra2 Wide SCSI Interface (MIC-3376S/MIC-3376F) An optional rear transition board (MIC-3301) can be used to connect • Controller: Symbios SYM53C895 a keyboard, a mouse and one serial port from the rear panel. It also • Performs Ultra2 wide SCSI LVD synchronous transfers as fast as can carry a 2.5” hard disk drive and one CompactFlash disk. 80 MB/s Meets Industrial Applications Requirements • 68-pin connector on front panel The MIC-3376 is designed for use in mission critical applications. It Rear Transition Board (MIC-3301) accepts a CompactFlash memory card to eliminate fragile rotating • Front panel I/O connectors: PS/2 keyboard and mouse, COM 1 hard drive. A watchdog timer can automatically reset the system or generate an interrupt if the system stops due to a program bug or • On-board connectors: One floppy disk connector (34-pin 2.54 EMI. The two-layer front panel design complies with IEEE 1101.10. mm pitch box header), primary IDE connectors (includes one 40- Connectors are firmly screwed to the front panel, and the replaceable pin 2.54 mm pitch box header, one 44-pin 2.0 mm pitch box shielding gasket is attached to the panel edge. This reduces header for 2.5” hard disk drive, one CompactFlash socket, and emissions and gives better protection against external interference. one secondary IDE connector (40-pin 2.54 mm pitch box header)) Specifications • On-board brackets to carry a 2.5’ hard disk drive • Size: 6U high, two-slot wide (8 TE) Standard SBC Functions ® ® ® • CPU: Intel Pentium III up to 550 MHz, Pentium II up to 450 Mechanical and Environmental Specifications MHz. • Operating temperature: 0° to 60° C (32° to 140° F) • BIOS: Award 2 MB Flash memory. • Storage temperature: -20° C ~ 70° C (-4° F ~ 158° F) • Chipset: Intel 440BX. • Humidity (operating and storage): 5 ~ 95% (non-condensing) • Front side bus clock: 100/66 MHz. • Size: 233.35 x 160 mm (6U), 2-slot (8 TE) wide • Bus interface: 32-bit, 33 MHz, PICMG 2.0 compliant. • Weight: 0.8 kg (1.8 lb) • 2nd level cache: CPU built-in 512 KB. • Shock: 20 G (operating); 50 G (storage/transit) • RAM: Two 168-pin DIMM sockets. Supports up to 512 MB SDRAM, supports ECC. Ordering Information • Enhanced IDE interface: Handles up to 4 IDE devices. Supports PIO mode 4 and DMA/33 mode. Available through J3 connector. ® q MIC-3376: 6U CompactPCI Pentium III/II processor board with • Floppy disk drive interface: Supports up to two floppy disk single PCI-to-PCI bridge, dual LAN, VGA, utility CD-ROM disc, drives. available through J3 connector. manual, and heat sink • CompactFlash interface: Accepts one CompactFlash card on ® q MIC-3376S: 6U CompactPCI Pentium III/II processor board with primary IDE channel, master or slave selectable by a jumper. single PCI-to-PCI bridge, SCSI, dual LAN, VGA, utility CD-ROM, • Parallel port: Configured to LPT1, LPT2, LPT3 or disabled. manual, and heat sink Supports multimode parallel (SPP/EPP/ECP) port. ® q MIC-3376D: 6U CompactPCI Pentium III/II processor board with • Ethernet: Two Intel 82559 Fast Ethernet controller chips, 10/ dual PCI-to-PCI bridge, dual LAN, VGA, utility CD-ROM disc, 100Base-TX with RJ-45 connectors. manual, and heat sink ® • Serial ports: Two RS-232 ports with 16550 UARTs q MIC-3376F: 6U CompactPCI Pentium III/II processor board with dual PCI-to-PCI bridge, SCSI, dual LAN, VGA, utility CD-ROM disc, • USB interface: Two USB ports. manual, and heat sink • Watchdog timer: Can generate a system reset or IRQ 15. Software q MIC-3301: 6U Rear transition board, provides connection to enabled/disabled. Time interval is from 1 to 63 seconds. COM1, keyboard, and mouse on rear panel. Connectors for two Jumperless with run-time setup. IDE channels on board. (for use in a chassis with rear I/O • Keyboard/mouse connector: One 6-pin mini-DIN connector on support) the front panel. • PCI-to-PCI bridge: One or two Intel DEC 21150 controller chips, drive up to seven or fourteen bus master peripherals. 2010337600 Note: All specifications are subject to change without notice