ADVANTECH MIC-3369
Specifications
Altitude
60m below sea level to 4000m above sea level
BIOS
Award 4 Mb Flash (Network booting/Console redirect (optional)
Bus
64-bit/66 MHz
Channel
2
Chipset
Intel E7501/ICH4
Compatibility
Windows2000/NT 4. 0/XP, Red Hat Linux 8.0 and 9.0 VxWorks
Connector
One IDE connector and space reserved for embedded 2.5" HDD
Controller
ATI RageXL
Hint HB6
Intel 82546EB x1 (Dual GbE ports)
Winbond W83782D
CPU
Intel Pentium M processor (fanless)
Dimensions
233.35 x 160 mm (9.2" x 6.3"), 1-slot width
Front Side Bus
400 MHz
Humidity
95 % @ 60° C (non-condensing)
I/O Connector
RJ-45 x1 (front)
Integrated
512 MB/1 GB/2 GB memory on board (No onboard SO-DIMM connector for upgradility)
Interface
10/100/1000Base-TX
PCI Mezzanine (IEEE1386.1)
System/Drone mode capability
Interval
Programmable, 0 ~ 255 sec.
L2 Cache
1MB on 1.6Ghz CPU die or 2MB on 745 1.8Ghz CPU die
Lan
1
LEDs
HDD, power, hot swap
Max. Capacity
2 GB (optional)
Mode
ATA 33/66/100
Monitor
CPU temperature, 3.3 V/5 V/12 V
Non-Operating Temperature
-40 ~ 70°C (-40 ~ 158°F)
Operating Temperature
0 ~ 55°C (32 ~ 131°F)
Output
Interrupt, system reset, NMI
PCI
64-bit/133 MHz(PCI-X support)
Processor
Intel Pentium M
Real Time Clock
Built-in the South Bridge
Serial (COM1)
1 (RS-232, RJ-45 connector)
Shock
20 G 50 G
Signal
+5 V/+3.3 V compliant
Site
1
Solid State Disk
CompactFlash socket
Speed
1.6GHz or 745 1.8GHz(both 400MHz FSB)
Technology
DDR-200 SDRAM with ECC support
USB (2.0)
2 channels
Vibration (5-500 Hz)
1.5 Grms 2.0 Grms
VRAM
8 MB on board
Weight
0.8 kg (1.76 lb)
Features
- Hot-Swap Specification compliant (PICMG 2.1)
- Intel E7501 chipset
- Master/Drone mode mode selectable
- On-board 2.5" HDD connector and CompactFlash socket
- One 64-bit/66 MHz PMC expansion slot
- PICMG 2.16 compliant with Packet Switching Backplane Specification
- PICMG 2.9 compliant with System Management Specification
- Supports Dual Gigabit LANs
- Supports Intel Pentium M 745 processor @ 1.8 GHz/2 MB L2 cache
- Supports Intel Pentium M processor 1.6 GHz
- Up to 2 GB (DDR-200) memory on board with ECC
Datasheet
Extracted Text
® ® ® 6U CompactPCI Intel Pentium M Processor Board with VGA/Dual Gigabit MIC-3369A LAN/PMC NEW Features § Supports Intel Pentium M 745 processor @ 1.8 GHz/2 MB L2 cache ® ® § Supports Intel Pentium M processor 1.6 GHz § Supports Dual Gigabit LANs § Up to 2 GB (DDR-200) memory on board with ECC ® § Intel E7501 chipset § One 64-bit/66 MHz PMC expansion slot ® § PICMG 2.16 compliant with Packet Switching Backplane Specification § PICMG 2.9 compliant with System Management Specification § Hot-Swap Specification compliant (PICMG 2.1) § On-board 2.5" HDD connector and CompactFlash socket § Master/Drone mode mode selectable Introduction ® ® The MIC-3369A is the first CompactPCI server blade with the Intel Pentium M processor CPU on board to comply with CompactPCI Packet Switching Backplane (cPSB) systems. Supporting the PICMG 2.16 specification, it is an ideal platform for the emerging switch-fabric applications blade server, mission critical and computing intensive applications such as third-generation (3G) wireless, voice over Internet protocol (VoIP), networking, image processing, and other demanding telecom/data communication applications. ® ® ® The new MIC-3369A has been optimized for the Intel Pentium M processor and Intel E7501 chipset. It represents the next step in high performance cPCI platforms, delivering compelling performance at 3.2 GB/s bandwidth across the 400 MHz system bus with a high performance, micro-architecture, and includes 32 KB level 1 instruction and data caches, 1 MB level 2 advanced transfer cache and up to 3.2 GB/s of bandwidth across dual high performance DDR memory channels with max 2 GB DDR 200 memory on-board. It also provides dual Gigabit Ethernets, and 3.2 GB/s of I/O bandwidth. Advantech is ready, with the MIC-3369A architecture to meet customer’s high performance requirements for both CPUs and I/Os. As the mission-critical demand increases in the next generation networking and telecommunication equipment, the MIC-3369A has been optimized to play as a master card in a cPCI system, it could also plug into a peripheral slot as a "drone mode" operating in stand-alone computer. The MIC-3369A is designed in compliance with PICMG 2.9 specification in cooperating with the remote system and platform management. One PMC knockout One DB-15 VGA port Two USB 2.0 ports One RJ-45 COM1 port One RJ-45 Gigabit LAN port One u-FCPGA socket One 64-bit/ One 2.5" HDD bay One passive CompactFlash 66 MHz PMC CPU heatsink Memory on board One 2.5" socket connector IDE socket Online Download www.advantech.com/products Advantech may make changes to specifications and product descriptions at any time, without notice. Last Updated: March-03-04 MIC-3369A Specifications Features ® ® CPU Intel Pentium Mprocessor(fanless) Speed 1.6GHzor7451.8GHz(both400MHzFSB) ProcessorSystem L2Cache 1MBon1.6GhzCPUdieor2MBon7451.8GhzCPUdie ® Chipset Intel E7501/ICH4 BIOS Award4MbFlash(Networkbooting/Consoleredirect(optional) FrontSideBus 400MHz Bus PCI 64-bit/133MHz(PCI-Xsupport) Technology DDR-200SDRAMwithECCsupport Memory Max.Capacity 2GB(optional) Integrated 512MB/1GB/2GBmemoryonboard(NoonboardSO-DIMMconnectorforupgradility) Controller ATIRageXL Graphic VRAM 8MBonboard Interface 10/100/1000Base-TX ® Ethernet Controller Intel 82546EBx1(DualGbEports) I/OConnector RJ-45x1(front) Mode ATA33/66/100 EIDE Channel 2 Connector OneIDEconnectorandspacereservedforembedded2.5"HDD Interface System/Dronemodecapability PCI-to-PCIBridge Controller HintHB6 Bus 64-bit/66MHz LAN 1 FrontI/OInterface Serial(COM1) 1(RS-232,RJ-45connector) OperatingSystem Compatibility Windows2000/NT4.0/XP,RedHatLinux8.0and9.0VxWorks Controller WinbondW83782D HardwareMonitor Monitor CPUtemperature,3.3V/5V/12V Output Interrupt,systemreset,NMI WatchdogTimer Interval Programmable,0~255sec. Site 1 PMC Interface PCIMezzanine(IEEE1386.1) Signal +5V/+3.3Vcompliant SolidStateDisk CompactFlashsocket LEDs HDD,power,hotswap Miscellaneous USB(2.0) 2channels RealTimeClock Built-intheSouthBridge Voltage +3.3V +5V +12V -12V PowerRequirement ® ® (Intel Pentium M1.6GHz) Maximum 5.18A 4.19A 38mA <25mA Operating Non-Operating Temperature 0~55°C(32~131°F) -40~70°C(-40~158°F) Humidity 95%@60°C(non-condensing) Environment Shock 20G 50G Vibration(5-500Hz) 1.5Grms 2.0Grms Altitude 60mbelowsealevelto4000mabovesealevel Dimensions 233.35x160mm(9.2"x6.3"),1-slotwidth Physical Weight 0.8kg(1.76lb) PICMG2.0,R3.0CompactPCISpecification PICMG2.1,R2.0Hot-SwapSpecification Compliance Standard PICMG2.9,R1.0SystemManagementSpecification PICMG2.16,R1.0PacketSwitchingBackplaneSpecification Recommended Configurations CPUBoard PMCModule RearI/OBoard Enclosure MIC-3036-A,MIC-3039-B,MIC-3056A,MIC-3038A,MIC-3038C,MIC-3041B,MIC-3081, MIC-3369A MIC-3662D,MIC-3661D RIO-3309C-A MIC-3082A Rear Transition Board RearPanel On-boardHeader/Socket/Connector PartNumber SlotWidth KB&Mouse COM2* GbELAN VGA USB 10/100LAN** IDE FDD COM1 USB PRT Conn. RIO-3309C-A 1 1 2 1 1 1 1 1 1 1 1 J3/J5 1 * Support RS-232/422/485 selectable ** Optional for 3rd LAN from MIC-3369A but occupies the I/O port for COM2. Ordering Information FrontPanelI/O OnBoardMainFeatures PartNumber LAN COM PMC USB VGA CPU Memory EIDEChannel CFsocket SlotWidth MIC-3369A-M0 1 1 1 2 1 -- 512MB 2.5"HDD 1 1 MIC-3369A-M1 1 1 1 2 1 -- 1GB 2.5"HDD 1 1 MIC-3369A-M2 1 1 1 2 1 -- 2GB 2.5"HDD 1 1 Online Download www.advantech.com/products Advantech may make changes to specifications and product descriptions at any time, without notice. Last Updated: March-03-04
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the MIC-3369 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
Related Products

Advantech 9662302102 Fan Tray Module. Including Metal Bracket | 2 x 86 CFM Fan | Fan Filter and Foam...

Advantech 9662303206 Fan Tray Module Including Metal Bracket, 1 x 86 CFM Fan, Fan Filter Foam and Co...
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods