Elite.Parts

Description

Advantech MIC-3081 10U CompactPCI Enclosure with 8-slot 6U Backplane and Redundant Power Supply (CT Bus and Rear I/O)

Part Number

MIC-3081

Price

Request Quote

Manufacturer

ADVANTECH

Lead Time

Request Quote

Category

COMPACTPCI

Specifications

3.5" HDD

5.25" HDD

6U Slot

System x8, Rear transition x8 (80 mm, IEEE 1101.11 compatible)

Blower

2 (hot-swap, 40 CFM/each) on the chassis top (outlet)

Bus

32-bit/33 MHz, 64-bit/66 MHz

Dimensions (W x H x D)

444 x 446 x 342 mm (17.5" x 17.6" x 13.5")

Fan

2 (hot-swap, 163 CFM/each) on the chassis bottom (inlet)

H.110 CT Bus

Yes

Humidity

10 ~ 95 % @ 40 °C, non-condensing

Input

AC 100 ~ 240 V @ 47 ~ 63 Hz, full range (PFC)

MTBF

100,000 hours

MTTR

5 minutes

Non-Operating Temperature

-40 ~ 60°C (-40 ~ 140°F)

Operating Temperature

0 ~ 45°C (32 ~ 113 °F)

Output

460 W ATX

Safety

CE, TUV, cUL, UL

VI/O Voltage

3.3 V/5 V (short-bar selectable)

Vibration

(5-500 Hz) 1.0 Grms 2.0 G

Weight

16.5 Kg (36.3 lb)

Features

10U-high enclosure, 19-inch enclosure
560 W ATX 2+1 redundant power supply
8-slot 6U Compact PCI Backplane
Built-in advance intelligent alarm module/chassis management module
Device bay accommodates up to three devices
H.110 CT bus compliant (PICMG2.5)
Hot-swappable fan modules and blowers
Supports rear I/O

Datasheet

MIC-3081.pdf

267 KiB

Download

Extracted Text

® 10U CompactPCI Enclosure with 8-slot 6U Backplane and Redundant Power Supply MIC-3081 (CT Bus and Rear I/O) Features § 10U-high enclosure, 19-inch enclosure § 8-slot 6U CompactPCI backplane § Supports rear I/O ® § H.110 CT bus compliant (PICMG 2.5) § 560 W ATX 2+1 redundant power supply § Hot-swappable fan modules and blowers § Built-in advance intelligent alarm module/chassis management module § Device bay accommodates up to three devices Introduction The MIC-3081 series CompactPCI is a 10U-high enclosure with eight CompactPCI slots for rack mounting, which provides a flexible, and configurable development platform. It supports an 8-slot H.110 CT bus backplane and rear I/O, designed to speed the implementation of telecom Internet and Industrial automation applications. Optimal for Cooling Airflow with Hot-swap Fans A 2U space underneath the card slots accommodates two 163-CFM high-speed fans, to provide forced cooling air into the system. There are also two high-speed blowers on the top for linear air flow to optimize the chassis cooling system. All the fans in this chassis are individually hot-swappable, allowing users to replace any of the fans without interrupting the system operation. The fan’s tachometer output enables the alarm module to monitor the speed of the fans. A protective circuit has been designed into the fan backplane to reduce spikes and noise during fan hot-swapping. This design allows users to replace new fans safely without turning the system off. System Fault Detection and Alarm Notification The MIC-3081 has an optional intelligent chassis management module, the MIC-3924A, to monitor and report internal conditions via SNMP trap, e-mail, pager and beep sounds. The system’s status including CPU (SBC) temperature, system power voltage levels and fan speeds can be easily checked remotely from any web browser for administrator monitoring. The chassis management module’s serial port can be linked to a modem, to communicate to a remote host for real time monitoring, module configuration and alarm reporting. No software is needed for remote monitoring since the SNMP/HTTP protocol provides an open platform for all operating systems. Hot-swap Passive Backplane with H.110 CT Bus The 6U-sized 8-slot backplane of the MIC-3081 supports 32/64-bit operations, and complies with PICMG 2.1 hot-swap specification. Eight CompactPCI slots are available. Slot 8 is dedicated to the system master, while slot 1 through 7 are available for additional 32/64-bit CompactPCI peripheral boards. Connectors P3 and P5 on each peripheral slot of the telephony backplane are configured for rear I/O, while connector P4 is configured for the ECTF H.110 CT bus (TDM telephony bus). The backplane may be configured for 3.3 V or 5 V I/O CompactPCI device support. A short bar is provided on the backplane to select the desired I/O voltage. The eight rear I/O are directly behind the backplane for IEEE 1101.11 compliance. 8-slot backplane LCM for 560 W ATX Intelligent alarm module (MIC-3921) or Supports IEEE Two hot-swappable 163-CFM fan modules with H.110 CT system status 2+1 redundant chassis management module 1101.11 rear I/O underneath the system for heavy loading bus (MIC-3921) power supply (MIC-3924A), detecting system power, transition boards applications fan speed and CPU temperature Online Download www.advantech.com/products Advantech may make changes to specifications and product descriptions at any time, without notice. Last Updated: March-03-04 MIC-3081 Specifications Features 6USlot Systemx8,Reartransitionx8(80mm,IEEE1101.11compatible) Bus 32-bit/33MHz,64-bit/66MHz Backplane H.110CTBus Yes V Voltage 3.3V/5V(short-barselectable) I/O MIC-3081A/8-10A MIC-3081A/8-10R,MIC-3081B/8-10R DriveBay 5.25"HDD 3 2 3.5"HDD 1 1 Fan 2(hot-swap,163CFM/each)onthechassisbottom(inlet) Cooling Blower 2(hot-swap,40CFM/each)onthechassistop(outlet) Input AC100~240V@47~63Hz,fullrange(PFC) Output 460WATX** 560WATX(2+1redundant,280W/each)* +3.3V +5V -5V +12V -12V +5Vsb +3.3V +5V -5V +12V -12V +5Vsb PowerRequirement Max.Load 45A** 40A** 0.0A 16A 2.0A 3.5A 36A* 58A* 0.5A 20A 1.5A 1.5A Min.Load -- 1.0A -- 0.5A -- -- 0.3A 2.0A -- 0.5A -- 0.1A Safety CE,TUV,cUL,UL Operating Non-Operating Temperature 0~45°C(32~113°F) -40~60°C(-40~140°F) Environment Humidity -- 10~95%@40°C,non-condensing Vibration(5-500Hz) 1.0Grms 2.0G Dimensions(WxHxD) 444x446x342mm(17.5"x17.6"x13.5") Physical Weight 16.5Kg(36.3lb) 18Kg(39.7lb) Reliability MTBF 100,000hours Serviceability MTTR 5minutes PICMG2.0,R3.0CompactPCISpecification Compliance Standard PICMG2.1,R2.0CompactPCIHot-SwapSpecification PICMG2.5,R1.0CompactPCIComputerTelephonySpecification * The Maximum combined load on +5 V and +3.3 V output shall not exceed 290 W ** The Maximum combined load on +5 V and +3.3 V output shall not exceed 300 W Recommended Configurations Ordering Information CPU Board Alarm AlarmModule/Chassis PartNumber PowerSupply Enclosure Rear I/O Board Module and Master Slave ManagementModule CMM MIC-3081A/8-10A 460WsingleATX MIC-3921 MIC-3377/M RIO-3301, RIO-3302, MIC-3921 MIC-3389 RIO-3302S 560WATX2+1redundant, MIC-3081A/8-10R MIC-3921 MIC-3368-A RIO-3308 MIC-3921 280W/each MIC-3368B-A 560WATX2+1redundant, MIC-3081A/8-10A MIC-3368E-A RIO-3308C MIC-3921 MIC-3081B/8-10R MIC-3924A 280W/each MIC-3081A/8-10R MIC-3368E1-A RIO-3308S MIC-3366* RIO-3306 -- MIC-3366B* MIC-3358A RIO-3309C MIC-3921 Parts Information MIC-3369A PartNumber Descriptions MIC-3368-A RIO-3308 MIC-3924 MIC-3368B-A 1757930036 SinglepowersupplymoduleforRPS560W(2+1)ATX MIC-3368E-A RIO-3308C MIC-3924 Fantraymoduleincludingmetalbracket,163-CFMx1 9682308100 MIC-3368E1-A RIO-3308S fan,foamandconnector MIC-3081B/8-10R MIC-3366* RIO-3306 MIC-3924 Blowertraymoduleincludingmetalbracket,40-CFMx1 MIC-3366B* 9682308101 fan,andconnector MIC-3358A RIO-3309C MIC-3924 MIC-3369A * Four peripheral slots are available when use this CPU board (2-slot width) Online Download www.advantech.com/products Advantech may make changes to specifications and product descriptions at any time, without notice. Last Updated: March-03-04

Frequently asked questions

At GID Industrial (Elite.Parts' parent company), we specialize in procuring industrial parts. We know where to find the rare and obsolete equipment that our customers need in order to get back to business. There are other companies who claim to do what we do, but we're confident that our commitment to quality and value is unparalleled in our field.

Warranties differ by part and by which suppliers we use to procure it for you. Sometimes, a part will be sold as-is and without a warranty. Our specialty, single board computers, tend to receive a one-year warranty.

Elite.Parts can ship via FedEx, UPS, DHL, and USPS. We have accounts with each of them and generally ship using one of those, but we can also ship using your account if you would prefer. However, we can use other carriers if it will be more convenient for you.

Absolutely! We are happy to serve customers regardless of location. We work with international clients all the time, and we are familiar with shipping to destinations all across the globe.

All major credit cards are accepted: Visa, MasterCard, Discover, and American Express. We will also accept payment made with wire transfer or PayPal. Checks will only be accepted from customers in the USA. Terms may available for larger orders, upon approval.

What they say about us

FANTASTIC RESOURCE

One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!

Bucher Emhart Glass

EXCELLENT SERVICE

With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.

Fuji

HARD TO FIND A BETTER PROVIDER

Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.

Applied Materials

CONSISTENTLY DELIVERS QUALITY SOLUTIONS

Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.

Nidec Vamco

TERRIFIC RESOURCE

This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.

Trican Well Service

GO TO SOURCE

When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.

ConAgra Foods

Why buy from GID?

What they say about us

Related Products