® 4U CompactPCI Enclosure with 6-slot 6U Backplane and Redundant Power Supply MIC-3041 ( CT or Non-CT Bus and Rear I/O ) MIC-3041 Features § 4U-high enclosure for 6U CompactPCI boards § 6-slots 6U CompactPCI backplane (two options: H.110 CT bus or Non-CT bus) § Supports two hot-swappable SCSI HDD bays or two removable IDE HDD bays § Supports rear I/O § Built-in IDE slim-type CD-ROM and floppy § 300 W ATX 1+1 redundant power supply § Supports hot-swappable fan modules § Optional intelligent chassis management module (MIC-3924) Introduction The MIC-3041 is a 4U-high enclosure designed for mission critical and high reliability applications. It is equipped with redundant power supply and hot swappable fan module to minimize MTTR (Mean Time to Repair). This system supports 6 standard CompactPCI boards and IEEE 1101.11 rear I/O transition boards. Users can route I/O signals to the rear transition boards for simplified system cabling. Front boards pop in and out without any hardwiring. The MIC-3041 has two built-in hot-swappable SCSI HDD bays or removable 3.5” IDE HDD bays as standard. One slim-type FDD and slim CD-ROM provide users more flexibility for storage media demands. There are two options for backplanes: CT bus or Non-CT bus design. The default H.110 bus complies with PICMG 2.5, which is the open architecture to build-up a telecom solution or as an ideal development platform. The Non-CT bus design is perfect for IA instruments and military applications. Specifi cations MIC-3041A/6-4R MIC-3041B/6-4R MIC-3041C/6-4R & MIC-3041CW/6-4R Backplane System Slot Physical # 2 Physical # 2 Physical # 5 Slot Number 6U CompactPCI x6, transition x6 (80mm, IEEE1101.11 compatible) Bus 32-bit/33 MHz, 64-bit/66 MHz 3.3 V/5 V (short-bar selectable) VI/O Voltage Drive Bay 3.5" SCSI HDD 2 -- -- 3.5" IDE HDD 2 (removable) 2 (removable) -- Slim CD-ROM 1 Slim FDD 1 Cooling Fan 1 (163 CFM) on the chassis bottom (outlet) Power Requirement Input AC 100 ~ 240 V @ 47 ~ 63 Hz, full range Output 300 W ATX redundant power supply with PFC ( 300 W/each ) +3.3 V* +5 V* -5 V +12 V -12 V +5 Vsb Max. Load 20 A 32 A 0.5 A 16 A 0.8 A 2.0 A Min. Load 1.0 A 3.0 A 0.0 A 2.0 A 0.0 A 0.1 A Environment Operating Non-Operating Temperature 0 ~ 45 °C (32 ~ 113 °F) -40 ~ 60 °C (-40 ~ 140 °F) Humidity -- 10-95% @ 40 °C, non-condensing Shock 10 G 30 G Vibration (5-500 Hz) 1.0 Grms 2.0 Grms Physical Dimensions (W x H x D) 440 x 177 x 300 mm (17.3” x 7” x 11.8”) Weight 14 Kg (30.8 lb) Reliability MTBF 100,000 hours Serviceability MTTR 5 minutes Compliance Standard PICMG 2.0 R3.0 CompactPCI Specifi cation PICMG 2.1 R2.0 CompactPCI Hot Swap Specifi cation PICMG 2.5 R1.0CompactPCI Computer Telephony Specifi cation (optional) *Max. output 35A for +5V and +3.3V. Online Download www.advantech.com/products Advantech may make changes to specifications and product descriptions at any time, without notice. Last Updated: July-13-04 Last Updated: July-13-04 MIC-3041 Backplane Information Features 1 I/O slot 6 I/O slot 2 System slot 5 System slot 3 I/O slot 4 I/O slot 4 I/O slot 3 I/O slot 5 I/O slot 2 I/O slot 6 I/O slot 1 I/O slot MIB-3804, Non-CT bus backplane ( for MIC-3041C/6-4R & MIC-3041CW/6-4R ) MIB-3041A, CT bus backplane ( for MIC-3041A/6-4R & MIC-3041B/6-4R ) Recommended Configurations Enclosure CCPU Board RIO Card * Alarm module MIC-3368E RIO-3308S-A MIC-3368E1 MIC-3389 RIO-3302S-A MIC-3041A/6-4R MIC-3377/M MIC-3924L-A** MIC-3358A RIO-3309C-A MIC-3369A MIC-3358L RIO-3309L MIC-3358A RIO-3309C-A MIC-3041B/6-4R MIC-3369A MIC-3924L-A** MIC-3358L RIO-3309L MIC-3358A MIC-3041C/6-4R RIO-3309C-A MIC-3924L-A** MIC-3369A & MIC-3041CW/6-4R MIC-3358L RIO-3309L * Rear I/O of peripheral slot #6 which is reserved for SCSI or IDE cable routing cannot be used. ** One can upgrade the alarm module from MIC-3924L-A to MIC-3924A-A or MIC-3924B-A • MIC-3924L-A: Chassis management module without remote control for general purpose chassis, with single SBC application. • MIC-3924A-A: Chassis management module for general purpose chassis, with single SBC application • MIC-3924B-A: Chassis management module for multi-SBC application Ordering Information Model Name Chassis Color CD-ROM FDD HDD Drive Bay Power Supply H.110 CT Bus MIC-3041A/6-4R Black 1 1 2 (SCSI) 300 W (1+1) AC ATX Yes MIC-3041B/6-4R Black 1 1 2 (IDE) 300 W (1+1) AC ATX Yes MIC-3041C/6-4R Black 1 1 2 (IDE) 300 W (1+1) AC ATX No MIC-3041CW/6-4R White 1 1 2 (IDE) 300 W (1+1) AC ATX No Parts Information Part Number Descriptions 1757000025 300 W AC ATX (1+1) redundant power supply (w/PFC) 1757000023 300 W AC ATX single power supply module of 1757000025 (w/PFC) 1757946002 460 W AC ATX single power supply (w/PFC) 9682304100 163 CFM left hand side fan module (outlet) Two hot-swappable SCSI HDD bays One slim-type FDD and slim CD-ROM or removable 3.5” IDE HDD bays 6-slot 6U CompactPCI backplane with H.110 CT bus Optional intelligent chassis 300 W ATX Hot-swappable 163-CFM Supports IEEE 1101.11 management module 1+1 redundant fan modules underneath rear I/O transition boards MIC-3924, detecting power supply the chassis for heavy ( optional ) fan speed and CPU loading application temperature Online Download www.advantech.com/products Advantech may make changes to specifications and product descriptions at any time, without notice. Last Updated: July-13-04 Last Updated: July-13-04