ADVANTECH EVA-X4300
Specifications
Board Type
SoC
Counter / Timer
Two sets of 8254 timer controller, Supports 2 sets Watch Dog Timer (WDT)
DMA Controller
Provides two 82C37 compatible DMA controllers, 4-channel 8-bit DMA transfer and 3-channel 16-bit DMA transfer
Embedded L1 Cache
16 KB I-Cache, 16 KB D-Cache
Ethernet Controller
Integrated 10/100 Mbps Ethernet (MAC + PHY) NE2000 Compatible
FIFO UART Port
Supports up to 5 COM ports, Compatible with 16C550/16C552, Default internal pull-high, Supports TXD_En signal on COM1 and COM2, Supports the programmable baud rate generator with the data rate from 50 to 460.8 Kbps, The character options are programmable for 1 start bits; 1, 1.5 or 2 stop bits; even, odd or no parity; 5~8 data bits, Port 80h output data may be redirected to COM1
General Chip Selector
Two sets extended Chip Selector, Configurable I/O-map or Memory-map, I/O Addressing: From 2 byte to 64 KB, Memory Address: From 512 byte to 4 GB
General Purpose I/O
Up to 40 GPIO, 8 dedicated and 32 multi-functional programmable I/O pins, GPIO pins can be individually configured as inputs, outputs, or as interrupt trigger sources, Open-drain with a pull-high 75 KW
IDE Controller
Supports 2 channel Ultra-DMA 100 ( PATA x 4 )
Input Clock
14.318 MHz, 32.768 KHz
Interrupt Controller
Provides two 8259 compatible interrupt controllers, Independent programmable level/edge-trigger interrupt channels, Serial IRQ supported
ISA Bus Interface
AT clock programmable, 8/16-bit ISA device with Zero-Wait-State, Generate refresh signals to ISA interface during DRAM refresh cycle, Complete IRQ set
LPC (Low Pin Count) Bus Interface
Supports 2 programmable registers to decode LPC address
Operating Temperature
-20° C ~ 85° C
Operating Voltage Range
Core Voltage: 1.32 V ± 5 %, I/O Voltage: 1.8 V ± 5 %, 3.3 V ± 10 %
Output Clock
24 MHz, 25 MHz, 14.318 MHz, PCI clock, ISA clock, SDRAM clock
Package Type
PBGA, 581 balls, Lead-free, RoHS compliant Dimensions: 27 mm x 27 mm x 2.23 mm
Parallel Port
Supports SPP / EPP / ECP mode
PCI Control Interface
32-bit, 33 MHz, compliant with PCI spec. Rev. 2.1, Up to 3 individual PCI master devices, 3.3 V I/O with 5 V tolerance
Power Consumption
Approx. 1.2 Watt
Processor
EVA-X4300
Processor Core
x86 core, 6 stage pipe-line, 300 MHz
PS/2 Keyboard and Mouse Interface
Compatible with 8042 controller
Real Time Clock
Internal RTC or External RTC, Under 2 uA power consumption on Internal Mode
SDR / DDR2 SDRAM Control Interface
16-bit data bus width, Supports DLL for clock phase auto-adjustment, SDR supports up to 133 MHz, 128 MB, DDR2 supports up to 166 MHz, 256 MB
Speaker Out
Buzzer
SPI Interface
Supports external SPI flash as data storage
Stacked 256 KB Flash
Internal SPI interface, for BIOS storage
Universal Serial Bus
USB 1.1/2.0 Host controller, supports 4 USB ports, Supports HS, FS and LS mode
Features
- 32-bit 486SX instruction set compatible SoC
- Integrated interfaces: PCI, ISA, IDE, Ethernet PHY, USB, SPI and LPC
- Low power architecture (Fanless, no heatsink required)
- Operating frequency up to 300 MHz
- Stacked 256 KB Flash and 10/100 Mbps Ethernet PHY
- Supports both SDR and DDR 2 SDRAM
- Supports up to 40-bit GPIO and 5 UART
- Wide operating temperature range (-20° C ~ 85° C)
Datasheet
Extracted Text
Highly Integrated x86 SoC for EVA-X4300 Industrial Embedded Platforms Features 32-bit 486SX instruction set compatible SoC Operating frequency up to 300 MHz Supports both SDR and DDR 2 SDRAM Integrated interfaces: PCI, ISA, IDE, Ethernet PHY, USB, SPI and LPC Supports up to 40-bit GPIO and 5 UART Stacked 256 KB Flash and 10/100 Mbps Ethernet PHY Low power architecture (Fanless, no heatsink required) Wide operating temperature range (-20° C ~ 85° C) DOS Introduction EVA-X4300 is a fully static 32-bit x86-based processor that powers a wide-range of PC peripherals, applications and OSs, such as DOS, Windows CE, Linux and most popular 32-bit RTOS (Real Time OS) for maximum software re-use and legacy compatibility. EVA-X4300 integrates comprehensive features and rich I/O flexibility within a single System on Chip, to reduce board design complexity and shorten product development schedules. Taking advantage of ultra low power consumption, EVA-X4300 is able to operate in wide temperature range environments without thermal designs, making them the perfect x86-based SoC for diverse embedded applications. Specifications Processor Core x86 core, 6 stage pipe-line, 300 MHz Embedded L1 Cache 16 KB I-Cache, 16 KB D-Cache 16-bit data bus width SDR / DDR2 SDRAM Supports DLL for clock phase auto-adjustment Control Interface SDR supports up to 133 MHz, 128 MB DDR2 supports up to 166 MHz, 256 MB Provides two 82C37 compatible DMA controllers DMA Controller 4-channel 8-bit DMA transfer and 3-channel 16-bit DMA transfer Provides two 8259 compatible interrupt controllers Interrupt Controller Independent programmable level/edge-trigger interrupt channels Serial IRQ supported Two sets of 8254 timer controller Counter / Timer Supports 2 sets Watch Dog Timer (WDT) Two sets extended Chip Selector Configurable I/O-map or Memory-map General Chip Selector I/O Addressing: From 2 byte to 64 KB Memory Address: From 512 byte to 4 GB 32-bit, 33 MHz, compliant with PCI spec. Rev. 2.1 PCI Control Interface Up to 3 individual PCI master devices 3.3 V I/O with 5 V tolerance AT clock programmable 8/16-bit ISA device with Zero-Wait-State ISA Bus Interface Generate refresh signals to ISA interface during DRAM refresh cycle Complete IRQ set Integrated 10/100 Mbps Ethernet (MAC + PHY) Ethernet Controller NE2000 Compatible IDE Controller Supports 2 channel Ultra-DMA 100 ( PATA x 4 ) USB 1.1/2.0 Host controller, supports 4 USB ports Universal Serial Bus Supports HS, FS and LS mode LPC (Low Pin Count) Bus Interface Supports 2 programmable registers to decode LPC address Supports up to 5 COM ports Compatible with 16C550/16C552 Default internal pull-high FIFO UART Port Supports TXD_En signal on COM1 and COM2 Supports the programmable baud rate generator with the data rate from 50 to 460.8 Kbps The character options are programmable for 1 start bits; 1, 1.5 or 2 stop bits; even, odd or no parity; 5~8 data bits Port 80h output data may be redirected to COM1 Embedded Core Services All product specifications are subject to change without notice Last updated : 24-Mar-2009 EVA-X4300 Board Diagram 32-bit JTAG x86-based CPU SPI SPI interface 300 MHz interface Controller IDE IDE interface 32 KB North D/I Cache Bridge SDR/DDRII 256 KB Memory USB SDRAM Flash USB interface interface Controller PCI PCI Bus Interrupt WDTO LAN WDT MAC PHY Controller South Bridge Programable LPC GPCS LPC interface Chip Select ISA Bus Keyboard Parallel DMA GPIO Timer Mouse RTC PWM UART Port Controller Controller Counter Controller Keyboard External SPP /EPP /ECP GPIO PWM UART Mouse RTC Up to 40 GPIO, 8 dedicated and 32 multi-functional programmable I/O pins General Purpose I/O GPIO pins can be individually configured as inputs, outputs, or as interrupt trigger sources Open-drain with a pull-high 75 KW SPI Interface Supports external SPI flash as data storage Internal RTC or External RTC Real Time Clock Under 2 uA power consumption on Internal Mode Parallel Port Supports SPP / EPP / ECP mode PS/2 Keyboard and Mouse Interface Compatible with 8042 controller Stacked 256 KB Flash Internal SPI interface, for BIOS storage Speaker Out Buzzer Input Clock 14.318 MHz, 32.768 KHz 24 MHz, 25 MHz, 14.318 MHz Output Clock PCI clock, ISA clock, SDRAM clock Core Voltage: 1.32 V ± 5 % Operating Voltage Range I/O Voltage: 1.8 V ± 5 %, 3.3 V ± 10 % Operating Temperature -20° C ~ 85° C Power Consumption Approx. 1.2 Watt PBGA, 581 balls, Lead-free, RoHS compliant Package Type Dimensions: 27 mm x 27 mm x 2.23 mm Ordering Information Part Number Description Part Number Description EVA-X43000C-C00E EVA-X4300 EVA-X43000C-V00E EVA-X4300 bundle with VGA chip EVA-X43000C-CB0E EVA-X4300 bundle with BIOS license EVA-X43000C-VB0E EVA-X4300 bundle with VGA chip and BIOS license Online Download www.advantech.com/products
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the EVA-X4300 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods