ADVANET ADVME7511A
Specifications
Backup SRAM
512KB SRAM. Coin type lithium primary battery for data backup.
Boot ROM
512KB Flash memory
Environmental
RoHS compliant
External bus Interface
Standard: VME64x(ANSI/ VITA 1.1)and 2eSST(ANSI/VITA 1.5) compliant. Address/Data width: A16,A 24,A32,A64,D08,D16,D32,D64
Front I/O Ethernet
2ports. Serial port : TIA/EIA-232E specification, asynchronous, 1 port. 8 pin modular connector
Host Bridge
IDT Tsi108 or Tsi109 (The expanded temperature support version)
L1 cache
data 32KB, instruction 32KB
L2 cache
data / instruction 1MB
Main Memory
SDRAM supporting DDR2-400 is equipped on board. Capacity of 512MB or 1GB (Optional at shipment) With ECC function capable of automatic correction of 1 bit error within 64 bits.
Mechanical
Form factor: 6U size, 4HP (1 slot width). Weight: 380g.
On board I/O, and Peripheral
PMC I/F : IEEE 1386.1 compliant 2 slots. CompactFlash : CF+ and CompactFlash Specification Rev2.1 compliant.
PCI-VME Bridge chip
IDT Tsi148
Power
DC5V-5% (supplied from P1/P2 connector)
Processor
Freescale MC7448 1GHz or 1.4GHz (Optional at shipment)
Serial EEPROM
2k bit I2C-EEPROM Non-volatile memory to store boot information
Features
- A CPU internal temperature monitor, a board temperature monitor and a watchdog timer for RAS function
- Battery-backup SRAM 512kB
- CompactFlash socket
- Compatible with VITA35-2000 for PMC-P4 pin out mapping to VME64x-P2
- Freescale PowerPC G4 Processor MC7448 (1GHz/1.4GHz, option at shipping)
- Gigabit Ethernet (2ch)
- IDT Tsi108 or Tsi109 (The expanded temperature
- IDT Tsi148 for VME interface IC, supporting VME64x, 2eSST
- Onboard DDR2-SDRAM (bandwidth;3.2GB/s, with ECC function) (512MB/1GB, option at shipping)
- Operated by single power supply (5V)
- Size; 6U, 1 slot width
- support version) as a host bridge
- Two PMC slots (64bit,PCI(33/66MHz) /PCI-X(66/100MHz))
Datasheet
Advanet-ADVME7511A-ds1-1027487016.pdf
229 KiB
Extracted Text
VMEbus CPU Board Freescale PowerPC G4 Processor Advme7511A Freescale PowerPC G4 MC7448 Processor DDR2-SDRAM with ECC support Two PMC slots Supporting VME64x, 2eSST FEATURES • For Industrial automation,and so on. • • Freescale PowerPC G4 Processor MC7448 RoHS compliant (except the expanded temperature (1GHz/1.4GHz, option at shipping) support version) The Advme7511A is a high performance VME bus single board computer (6U size, 1 slot width) equipped with MC7448 processor • IDT Tsi108 or Tsi109 (The expanded temperature (PowerPC G4), Tsi108 or Tsi109 (host bridge) and Tsi148 (PCI-VME support version) as a host bridge bridge). • Onboard DDR2-SDRAM (bandwidth;3.2GB/s, with ECC CPU clock frequency (MC7448) is 1GHz or 1.4GHz and it has a built- function) (512MB/1GB, option at shipping) in L1 cache (64k bytes) and L2 cache (1MB). It is equipped with • Gigabit Ethernet (2ch) DDR2-SDRAM main memory, and supports CPU performance and I/O performance with the powerful bandwidth (3.2GB/s). Memory • CompactFlash socket capacity is 512MB or 1GB, and in either case, it corresponds to ECC that can correct single-bit error,and the high performance and high • Two PMC slots (64bit,PCI(33/66MHz) /PCI- reliability are had both. X(66/100MHz)) • Compatible with VITA35-2000 for PMC-P4 pin out It is equipped with a RS232C serial port (1ch) and Gigabit Ethernet (2ch) as front panel I/O, as well as a CompactFlash socket and two mapping to VME64x-P2 PMC(PCI/PCI-X)slots onboard. • Battery-backup SRAM 512kB The board’s VME interface supports VME64x and 2eSST, and can be • A CPU internal temperature monitor, a board used as either the system controller or nonsystem controller of the temperature monitor and a watchdog timer for RAS VME bus. The slot type is automatically recognized, and then function accordingly, the operation mode of the bridge IC is automatically changed. It can be used as a single central CPU, but furthermore, • IDT Tsi148 for VME interface IC, supporting VME64x, CPU boards can be added depending on the processing load. The 2eSST Advme7511A has an expanded temperature range of -20ºC to 75°C as factory optional settings (Tsi109). • Size; 6U, 1 slot width • Operated by single power supply (5V) VMEbus CPU Board Advme7511A Freescale PowerPC G4 Processor Specifications System Architecture Processor Freescale MC7448 1GHz or 1.4GHz (Optional at shipment) L1 cache : data 32KB, instruction 32KB L2 cache : data / instruction 1MB Host Bridge IDT Tsi108 or Tsi109 (The expanded temperature support version) Main Memory SDRAM supporting DDR2-400 is equipped on board. Capacity of 512MB or 1GB (Optional at shipment) With ECC function capable of automatic correction of 1 bit error within 64 bits. Boot ROM 512KB Flash memory Serial EEPROM 2k bit I2C-EEPROM Non-volatile memory to store boot information Backup SRAM 512KB SRAM Coin type lithium primary battery for data backup Front I/O Ethernet 2ports Serial port : TIA/EIA-232E specification, asynchronous, 1 port 8 pin modular connector On board I/O, PMC I/F : IEEE 1386.1 compliant 2 slots and Peripheral CompactFlash : CF+ and CompactFlash Specification Rev2.1 compliant External bus Interface Standard: VME64x(ANSI/VITA 1.1)and 2eSST(ANSI/VITA 1.5) compliant Address/Data width: A16,A24,A32,A64,D08,D16,D32,D64 PCI-VME Bridge chip IDT Tsi148 Power DC5V5% (supplied from P1/P2 connector) Mechanical Form factor: 6U size, 4HP (1 slot width) Weight: 380g Environmental RoHS compliant Block Diagram Note: The information in this document is subject to change without notice and should not be construed as a commitment by EUROTECH. While reasonable precautions have been taken, EUROTECH assumes no responsibility for any error that may appear in this document. All trademarks or registered trademarks are the properties of their respective companies. Oct 2011 North America Latin America sales.na@eurotech.com sales.la@eurotech.com For your local contact please refer to: Europe, Middle East and Africa Asia Pacific www.eurotech.com/contacts sales.emea@eurotech.com sales.ap@eurotech.com
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the ADVME7511A have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
Why buy from GID?
Quality
We are industry veterans who take pride in our work
Protection
Avoid the dangers of risky trading in the gray market
Access
Our network of suppliers is ready and at your disposal
Savings
Maintain legacy systems to prevent costly downtime
Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods