ADVANET A6PCI7508
Specifications
Board Size
6U single slot width
CPU
Freescale MPC7447A Select either 600MHz/1GHz (optional at time of shipment) L1 cache: 32KB+32KB, L2 cache: 512KB
External Bus I/F
Bridge chip PLX PCI6254 When using system slot: Transparent bridge When using peripheral slot: Non-transparent bridge Signaling levels: 3.3V or 5V (optional at time of shipment) 64-bit data bus/33MHz
Front-Panel
Serial port: TIA/EIA-232E standard?start-stop synchronization 8-pin modular connector Ethernet A: Uses Intel RC82545GM 10/100/1000Base-T,8-pin modular connector Ethernet B: Uses onboard Tsi108 MAC and external PHY 10/100/1000Base-T,8-pin modular connector
Host Bridge
Tundra Tsi108
Memory
Boot ROM: 512KB FLASH memory Main memory: Onboard SDRAM supports DDR2-400 Select from either 512MB or 1GB (optional at time of shipment) Provided with ECC function that can automatically perform single bit correction out of 64 bits Backup SRAM: 512KB SRAM Serial EEPROM: 2Kbit I2C-EEPROM
Onboard I/O
PMC×2,CompactFLASH Realtime clock (Epson RTC-8564JE)
Power Requirements
DC5.0V±5%,DC3.3V±5% DC5.0V max 4A (When CPU is 1 GHz, not including PMC) DC3.3V max 2A(As above)
RAS Function
Watchdog timer, CPU internal/board temperature monitor
Datasheet
Extracted Text
www.advanet.co.jp CompactPCI series PowerPC CPU Board PowerPC G4 CPU Board PowerPC G4 CPU Board Features The A6pci7508 is a 6U size single slot width high performance Compact PCI single board computer with an onboard Power PC G4 MPC7447A processor by Freescale. The operating clock of the MPC7447A, which is the CPU, is 1 GHz, and it has an internal 64KB L1 cache and a 512 KB L2 cache. The main memory consists of the latest DDR2-SDRAM, and supports CPU and I/O power across a powerful 3.2 GB/s bandwidth. It also supports ECC, enabling correction of single bit data errors, combining high reliability with performance. As a front panel I/O, the A6pci7508 is equipped with 1 ch RS-232C serial ports, 2 ch gigabit Ethernet, one onboard CompactFLASH socket, and two PMC (PCI Mezzanine Card) slots. The A6pci7508 can use either a Compact PCI system slot or a peripheral slot. It automatically recognizes the type of slot, and changes the bridge IC operating mode and whether or not there is a terminating resistor accordingly. While it goes without saying that it can be used as a single central CPU, multiple CPU boards can be added in response to increased processing loads. You can choose from a CPU operating clock of either 600 MHz or 1 GHz, and the memory sizes of 512 MB or 1 GB. The A6pci7508 can handle a wide range of customer requirements. Specifications Block diagram CPU Freescale MPC7447A CPU Select either 600MHz/1GHz (optional at time of shipment) PowerPC G4 Processor L1 cache: 32KB+32KB, L2 cache: 512KB MPC7447A Host bridge Tundra Tsi108 Memory Boot ROM:512KB FLASH memory Host I/F 72 1.3GB/s Main memory:Onboard SDRAM supports DDR2-400 8 Ethernet B Select from either 512MB or 1GB (optional at time of shipment) SRAM 512KB RJ45 Host Provided with ECC function that can automatically perform single 16 Mem I/F Local Port CompactFLASH 3.2GB/s 16 bit correction out of 64 bits Host Bridge DDR2-400 SDRAM 8 1GB max with ECC Tsi108 72 Backup SRAM:512KB SRAM CPLD(Watchdog, etc.) Serial EEPROM:2Kbit I2C-EEPROM 8 RS-232C RJ45 Dip Switch Front panel I/O Serial port:TIA/EIA-232E standard start-stop synchronization PCI bus 8-pin modular connector I2C bus 33MHz 64 1 Ethernet A:Uses Intel RC82545GM 64 EEPROM 2Kbit PMC Slot 1 10/100/1000Base-T,8-pin modular connector 64 PMC Slot 2 Ethernet B:Uses onboard Tsi108 MAC and external PHY RTC RTC-8564JE Ethernet A 64 10/100/1000Base-T,8-pin modular connector Gbit Ethernet RJ45 RC82545GM Therm Sensor DS1631Z Onboard I/O Peripherals CompactPCI 33MHz 64 PMC×2,CompactFLASH CPCI bridge Therm Sensor DS1631Z PLX6254 64 Realtime clock (Epson RTC-8564JE) Hot Swap External bus I/F 5.0V Switching Regurator 1.3V/1.1V Control 1.8V 5.0V Switching Regurator Bridge chip PLX PCI6254 0.9V 5.0V Switching Regurator 5.0V Switching Regurator 1.2V When using system slot: Transparent bridge 3.3V Linear Regurator 2.5V When using peripheral slot: Non-transparent bridge 2.5V Linear Regurator 1.5V Signaling levels: 3.3V or 5V (optional at time of shipment) 64-bit data bus/33MHz RAS function Watchdog timer, CPU internal/board temperature monitor Power requirements DC5.0V±5%, DC3.3V±5% DC5.0V max 4A (When CPU is 1 GHz, not including PMC) DC3.3V max 2A(As above) Board size 6U single slot width
Frequently asked questions
What makes Elite.Parts unique?

What kind of warranty will the A6PCI7508 have?

Which carriers does Elite.Parts work with?

Will Elite.Parts sell to me even though I live outside the USA?

I have a preferred payment method. Will Elite.Parts accept it?

Why buy from GID?

Quality
We are industry veterans who take pride in our work

Protection
Avoid the dangers of risky trading in the gray market

Access
Our network of suppliers is ready and at your disposal

Savings
Maintain legacy systems to prevent costly downtime

Speed
Time is of the essence, and we are respectful of yours
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods