Manufacturers
ADL 292249
Description
ADC 292249 CPU Board - ADL855PC-370-G5 292249 1.5Ghz, 1024k L2 cache, PC/104+ CPU
Part Number
292249
Price
Request Quote
Manufacturer
ADL
Lead Time
Request Quote
Category
PRODUCTS - 2
Features
- 10/100 Base-T LAN-Ethernet
- 128MB - 1024MB DDR-SDRAM
- 4 x USB2.0 Ports
- COM1, COM2, LPT1
- CRT/LCD on-board
- Direct-X Video Controller
- EIDE Hard Disk Interface
- Intel 855GME / ICH4, 400MHz FSB
- Intel Pentium M / Celeron M, 0.6GHz - 1.8GHz
- Non Volatile Setup Save
- Power Management (APM 1.2 plus features)
- RTC and Watchdog Timer
- Single 5VDC Power Supply
Datasheet
Extracted Text
PC/104 - Plus ® ® ADL855PC - Pentium M / Celeron M CPU 0.6GHz - 1.8GHz Features ® ® ® • Intel Pentium M / Celeron M, 0.6GHz - 1.8GHz ® • Intel 855GME / ICH4, 400MHz FSB • Power Management (APM 1.2 plus features) • 128MB - 1024MB DDR-SDRAM • Direct-X Video Controller • CRT/LCD on-board • 10/100 Base-T LAN-Ethernet • 4 x USB2.0 Ports • EIDE Hard Disk Interface • COM1, COM2, LPT1 • RTC and Watchdog Timer • Non Volatile Setup Save • Single 5VDC Power Supply Ordering Information Description Item Codes Part# Description ® ® The ADL855PC is based on the Intel Pentium M / Cel- ® ADL855PC-600C-G5 292243 0.6 GHz, 512k L2 cache, PC/104+ CPU eron M processors offering clock rates up to 1.8GHz. The ® ADL855PC-373C-G5 292248 1.0 GHz, 512k L2 cache, PC/104+ CPU Intel 855GME chipset (GMCH) supports a 400MHz FSB ® ADL855PC-738-G5 292246 1.4 GHz, 2048k L2 cache, PC/104+ CPU with integrated Intel Graphics controller “Extreme Graph- ADL855PC-745-G5 292245 1.8 GHz, 2048k L2 cache, PC/104+ CPU ics 2“. It can drive either a CRT or LVDS LCD. The mem- ADL855PC-140-G5 292268 1.0 GHz, 0k L2 cache, PC/104+ CPU ory is added via an SODIMM200 socket and can accept up Additional options are available, please contact our sales department. to 1Gigabyte of DDR333 SDRAM. SoDIMM200 SDRAM Memory DDR-DRAM128-3 994715 128MB DDR 333MHz STD TEMP DDR-DRAM256-3 994825 256MB DDR 333MHz STD TEMP The ADL855PC power management incorporates ACPI/ DDR-DRAM512-3 994925 512MB DDR 333MHz STD TEMP ® APM functions, which utilizes Intel's Advanced SpeedStep DDR-DRAM1024-3 994025 1024MB DDR 333MHz STD TEMP ® (Pentium M only) feature. The standard ADL855PC also DDR-DRAM512-3EX 994928 512MB DDR 333MHz -40°C - +85°C incorporates PCI 2.2 Bus, EIDE, 4xUSB 2.0, 2xRS232 DDR-DRAM1024-3EX 994028 1024MD DDR 333MHz -40°C - +85°C COM ports, PS/2 Keyboard and Mouse, parallel printer, DDR-ECC512 TBD 512MB ECC DDR 333MHz STD TEMP DDR-ECC1024 TBD 1024MB ECC DDR 333MHz STD TEMP AC97 Sound, and 10/100MBit LAN and more. DDR-ECC512-EX 995928 512MB ECC DDR 333MHz -40°C - +85°C DDR-ECC1024-EX 995026 1024MB ECC DDR 333MHz -40°C - +85°C ADL offers highly effective active and passive cooling solu- tions based on proven thermal data and mounting tech- Thermal Solutions niques; resulting in the least possible mechanical board ADL855PC-Fan 293051 Fan Only (not mounted) stress. Please contact your Sales Engineer for detailed ADL855PC-Spreader 293052 Thick Spreader (conductive cooling) ADLTS2HSS 292054 2 piece Heat-Sink Thermal Solution information on cooling solutions to fit your needs. ADLTSHSS-Fan 293057 Companion fan for ADLTS2HSS ADLTS2Pipe 293054 2 Heat-Pipe Thermal Solution Optional Cables ADL855PC-CK 293045 Development cable kit ADL8XX-PC 100-9700 ADL power cable for ADL855/LX8/S15 Data subject to change without notice Individual development cables are available, please contact our sales department. Advanced Digital Logic, Inc.; 4411 Morena Blvd., Suite 101; San Diego, CA 92117-4345 Ph. 858 490-0597 F. 858 490-0599; e-mail: sales@adl-usa.com; web: www.adl-usa.com PC/104 - Plus Feature Technical Specifications FEATURES FUNCTIONS REMARKS OPTIONS ® ® ® Processor/CPU: Intel Pentium M / Celeron M 0.6GHz - 1.8GHz L2-Cache: 2048KB / 1024KB / 512KB CPU Dependent ® CPU-Clock: 0.6GHz Celeron M ® CPU-Clock: 1.0GHz Celeron M ® CPU-Clock: 1.4GHz Pentium M ® CPU-Clock: 1.8GHz Pentium M ® Chipset Intel 855GME / ICH4 Front Side Bus 400MHz ® CPU Speed Steps: 100MHz software program. via CSR N/A on Celeron M ® INTEL Speed Step Technology: Geyserville III N/A on Celeron M Memory 200pin DDR SODIMM: 128MB* – 1024MB ECC Memory Supported *128MB - 256MB available on request Video Controller: 855GME Intel Extreme Graphics 2 Video Memory: 1 – 32MB UMA DDR-RAM 64MB Window Video Interfaces: VGA-Analog, LVDS Video Channel 1: 1600x1280x16 @ 85Hz max Video Channel 2: LVDS 18/24/36/48 Bit 36/48 requires second cable Real Time Clock: Yes External Battery Required for RTC ® LAN-Controller: Intel ICH4 – ext. PHY 82562EZ 10/100 MBit with PXE and RPL ® AC97-Controller: Intel ICH4 – AC97 V2.3 ALC650 Codec 5.1 Sound ® SMBus-Controller: Intel ICH4 – SMBus USB2-Controller: 4 Ports V2.0 Flash BIOS: 512KB/1MB 2MB available on version G5 BIOS: Award Power Management Control: ACPI / APM EIDE-Controller: PIO 1-4 and UDMA 100*/66*/33 Primary Master/Slave *requires 80 conductor cable HW-Monitor: Winbond W83627HF Audio Output: Stereo Output and SPDif 5.1 Support Audio Input: Stereo-Line, Mic and SPDif Keyboard: PS/2-USB Mouse: PS/2-USB COM1: RS232 115KBit max, TTL solder COM2: RS232 115KBit max, TTL solder LPT1: Uni/ECP/EPP Shared with FDC Floppy Disk: Available Shared with LPT ISA-Bus: Fintek F85226F LPC-ISA-Bridge, 16-Bit PCI-Bus: V2.2 Support For 4 Masters Spec: PC/104 Plus V2.0 Power Supply: 5volt +/-25mV ADLPS104CF recommended Power consumption: TBD. ® Celeron M 0.6GHz: -20°C to +75°C With ADL thermal solutions Extended Temperature ® -40°C to +85°C Celeron M 1.0GHz: -20°C to +75°C With ADL thermal solutions Available ® Operating Temperature: Pentium M 1.3GHz: -20°C to +60°C With ADL thermal solutions ® (typ. ambient) Pentium M 1.4GHz: -20°C to +60°C With ADL thermal solutions Provided CPU is kept below 100°C at all ® times and the installation has sufficient Celeron M 1.5GHz: -20°C to +60°C With ADL thermal solutions thermal path to dissipate ® Pentium M 1.8GHz: -20°C to +60°C With ADL thermal solutions Dimensions: 4.550” x 3.775” Weight: (gr) 120 g Data subject to change without notice Advanced Digital Logic, Inc.; 4411 Morena Blvd., Suite 101; San Diego, CA 92117-4345 Ph. 858 490-0597 F. 858 490-0599; e-mail: sales@adl-usa.com; web: www.adl-usa.com
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the 292249 have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods