PMC Modules PMC Modules NEW! PMC-DX502/2002 Reconfigurable FPGA with Differential I/O ■PMC-DX502: 32 differential I/O, 500K gates ■PMC-DX2002: 32 differential I/O, 2M gates PMC-DX502 and PMC-DX2002 modules provide users Download your own logic programs and algorithms into the on-board user-configured FPGA to quickly create a custom digital I/O module. with the capability to implement complex, customized digital I/O board solutions. Application-specific logic PMC Compliance Specifications Conforms to PCI Local Bus Specification, Revision 2.2 and routines and algorithms can be downloaded into the FPGA CMC/PMC Specification, P1386.1. on-board reconfigurable FPGA to control operation of FPGA: Xilinx Virtex-II FPGA Electrical/Mechanical Interface: Single-Width Module. the I/O channels. PMC-DX502: XC2V500 FPGA with 500K system gates 32-bit PCI Master: Implemented by PLX PCI 9056 device. PMC-DX2002: XC2V2000 FPGA with 2M system gates These modules are ideal for advanced differential PCI bus clock frequency: 66MHz. FPGA configuration: Downloadable via PCI bus or from flash RS422 I/O functions. Typical uses include hardware memory. Signaling: 5V and 3.3V compliant. simulation, in-circuit diagnostics, and communication Input/output signals: 32 differential lines. Interrupts (INTA#): Interrupt A is used to request an interrupt. processing. Modules are able to generate recipe-based Example FPGA program: VHDL provided implements interface responses to input stimulus and to translate communi- Environmental to PCI bus IC, interface to SRAM, PLL control, and digital I/O cation protocols. Operating temperature: 0 to 70°C or -40 to 85°C (E versions) control. Program requires user proficiency with Xilinx soft- ware tools. See Engineering Design Kit. Storage temperature: -55 to 105°C. Powerful and versatile, these PMC modules are designed ® ® Relative humidity: 5 to 95% non-condensing. around a reconfigurable FPGA, the Xilinx Virtex -II. The Digital I/O Power: Consult factory. Operates from 3.3V supply. PMC-DX502 has the 500K-gate package, while the I/O channel configuration: 32 bi-directional differential signals. Direction is controlled independently. MTBF: Consult factory. PMC-DX2002 uses the 2M-gate version.Both DSP- capable FPGAs feature versatile logic resources, large Differential driver output voltage with 50 ohm load: 2V minimum, 5V maximum. Ordering Information on-chip memories, and a high-speed interface. Common mode output voltage: 3V maximum: ® PMC Modules The PCI bus interface is handled by a PLX PCI 9056 Minimum input resistance: 12K ohms. PMC-DX502: Differential I/O with 500K-gate FPGA device which provides 32-bit 66MHz bus mastering Termination resistors: 120 ohm termination resistor PMC-DX502E: PMC-DX502 with extended temp.range with dual-channel DMA support. networks are installed in sockets. PMC-DX2002: Differential I/O with 2M-gate FPGA Engineering Design Kit PMC-DX2002E: PMC-DX2002 with extended temp.range Features Provides user with basic information required to develop a PMC-DX-EDK: Engineering Design Kit (one kit required)■32 bi-directional RS422 differential I/O lines custom FPGA program. Kit must be ordered with the first purchase of a PMC-DX module. See Page 54 for details.■Customizable FPGA with 500,000 or 2,000,000 gates Software (see Page 81) ® PMCSW-API-VXW: VxWorks software support package (Xilinx Virtex-II XC2V500 or XC2V2000) ® PCISW-API-QNX: QNX software support package ■FPGA code loads from PCI bus or flash memory ® PCISW-API-WIN: Windows DLL software support ■256K x 36-bit SRAM memory Accessories (see Page 87) 5025-288: Termination panel, SCSI-3 connector,■Supports dual DMA channel data transfer to CPU 68 screw terminals ■Supports both 5V and 3.3V signalling 5028-432: Cable, shielded, SCSI-3 connector both ends ■Extended temperature option (-40 to 85°C) Acromag, Inc. • PO Box 437, Wixom, MI 48393  Phone: 248-624-1541  Fax: 248-624-9234  solutions@acromag.com  www.acromag.com 57