Industry Pack Modules NEW! IP482/483/484 Not Actual Photo Counter/Timers (available 4th Qtr 2003) ■IP482: Ten 16-bit counters – TTL ■IP483: Five 16-bit counters – TTL, and Two 16-bit counters – RS422 ■IP484: Five 16-bit counters – RS422 These modules are very flexible and available in several varieties to accommodate a broad range of counter/timer applications. Several models with a variety of configurations provide up to ten counter/timer channels for counting events, IP Compliance (ANSI/VITA 4) Specifications Meets IP specifications per ANSI/VITA 4-1995. generating waveform control signals, measuring pulse- Counter/Timers IP data transfer cycle types supported: Input/output (IOSel*), widths or periodic rates, and monitoring operations. Counter/timer configuration: ID read (IDSel*), Interrupt select (INTSel*). IP482: Ten 16-bit counters – TTL Support for internal or external triggering simplifies the Access times (8MHz or 32MHz clock): IP483: Five 16-bit counters – TTL synchronization of operations to specific events. Counter ID space read: 0 wait states (250ns cycle). Two 16-bit counters – RS422 functions can use internally generated clocks or an Registers read/write: 1 wait states (500ns cycle). IP484: Five 16-bit counters – RS422 Interrupt read/write: 0 wait states (250ns cycle). externally supplied clock. Clock frequency: 8 or 32 MHz. Field I/O: Front panel SCSI-3 connector. Environmental Features Operating temp.: 0 to 70°C or -40 to 85°C (E versions) 8MHz carrier operation: ■Up to ten 16-bit counter/timers (IP482) Selectable internal clock frequency: 0.5, 1, 2, 4, or 8 MHz. Storage temperature: -55 to 125°C. External clock: 2MHz maximum frequency. Relative humidity: 5 to 95% non-condensing.■Available with both TTL and RS422 Minimum input event: 125nS. Power: Consult factory. driver interface (IP483 only) Minimum pulse measurement: 125nS. Minimum period measurement: 300nS. MTBF: Consult factory. ■8 or 32MHz clock time base Minimum gate/trigger pulse: 125nS. 32MHz carrier operation: Ordering Information■Single counter/timer modes: Selectable internal clock frequency: 2, 4, 8, 16, or 32 MHz. - Event counting IP Modules External clock: 8MHz maximum frequency. - Frequency measurement IP482: Ten 16-bit counters – TTL Minimum input event: 31.25nS. - Period/pulse-width measurement Minimum pulse measurement: 31.25nS. IP482E: Same as IP482 plus extended temperature range - Quadrature position measurement Minimum period measurement: 150nS. IP483: Five 16-bit counters – TTL, Minimum gate/trigger pulse: 31.25nS. - Square wave/pulse train generation Two 16-bit counters – RS422 - Time/period interrupter Mode accuracy (with external clocking): IP483E: Same as IP483 plus extended temperature range Waveform generation: Period is ±62nS. - Pulse width generation IP484: Five 16-bit counters – RS422 Watchdog: Timeout occurs within ±1 clock cycle. Pulse/period measurement: ±1 clock cycle. IP484E: Same as IP484 plus extended temperature range ■Extended temperature option (-40 to 85°C) Interrupts: Supported for watchdog timer time-out, event For Industry Pack Carrier Cards, see Page 5. count complete, pulse width or periodic rate measurement complete, pulse wave complete (one-shot mode), succes- Software (see Page 81) Benefits sive waveform generation (continuous). IPSW-API-VXW ■Most configuration is handled by a single ® Triggering/gate: Programmable via register write or external VxWorks software support package register which minimizes programming. trigger. Minimum pulse width 125nS. Line may be used IPSW-API-QNX for gating of counter. ® QNX software support package■Pullups are socketed for easy adjustment. Counter trigger: Interface for triggering counter func- IPSW-ATX-PCI tions. Input level is TTL or RS422 differential digital. ® ActiveX /OLE Controls 2.0 software package Counter input: Interface for events and pulse/period measure- IPSW-LINUX ments. Also triggers load of watchdog timer register. Level ™ Linux support (website download only) is TTL or RS422 differential digital. For accessories information, see Page 87. TTL compatibility: V = 2.0V and V = 0.8V. inputs are IH IL buffered and include 4.7K pull-ups to +5V. Counter output: Level is TTL or RS422 differential digital. Acromag, Inc.  PO Box 437, Wixom, MI 48393  Phone: 248-624-1541  Fax: 248-624-9234  solutions@acromag.com  www.acromag.com 30 Industry Pack Modules