Industry Pack Modules Industry Pack Modules IP445 Isolated Digital Output IP445 modules provide 32 isolated solid-state relay outputs to safely control discrete devices. A major IP445 advantage is its flexibility. The module supports wide range bipolar (AC or DC) voltage switching. Each port can be configured for high or When used together, the IP440 input module and IP445 output module simplify loop-back monitoring of your critical signals. low-side switches. The outputs are TTL-compatible when configured as low-side switches using on-board Specifications Ordering Information socketed pull-up resistors. Digital Outputs Industry Pack Modules Output channel configuration: 32 isolated solid-state relays Isolation protects your computer system from noise, IP445 support AC or DC (high/low-side switching) operation. transient signals, and field wiring faults. Outputs are Digital output module. Isolation: Logic and field connections are optically isolated by grouped into four 8-channel ports. Ports are isolated via IP445E solid-state relays. Individual ports are also isolated from Same as IP445 plus extended temperature range. solid-state relays from the logic and from each other. each other. Output lines of an individual port share a For Industry Pack Carrier Cards, see Page 5. common connection and are not isolated from each other. Readback buffers simplify output status monitoring. IP Logic and field lines are isolated from each other for And for easy closed-loop monitoring of critical control Software (see Page 81) voltages up to 250V AC or 354V DC on a continuous basis signals, use the IP445 with an IP440 input module. IPSW-API-VXW (unit will withstand a 1000V AC dielectric strength test for ® VxWorks software support package one minute without breakdown). IPSW-API-QNX Features Voltage range: 0 to ±60V DC or peak AC. ® QNX software support package ■32 bipolar solid state relays Output ON current range: 140mA maximum continuous IPSW-ATX-PCI (up to 1A total per port). ®■High/low-side switch configuration ActiveX /OLE Controls 2.0 software package Turn on time: 1mS typical, 2mS maximum. IPSW-LINUX ■Port-isolated output channels Turn off time: 1mS typical, 2mS maximum. ™ Linux support (website download only) Output pull-up resistors: 4.7K ohms, socketed. ■±60V AC/DC voltage range For accessories information, see Page 87. IP Compliance (ANSI/VITA 4)■High speed processing (0 wait states) Meets IP specifications per ANSI/VITA 4-1995. ■TTL-compatible IP data transfer cycle types supported: Input/output (IOSel*), ID read (IDSel*). ■Failsafe power-up and system reset Access times (8MHz clock): 0 wait states (250ns cycle). ■Output readback function Updates: Requires four 8-bit writes to update all channels. ■Socketed pull-up resistors for low-side Environmental switching applications Operating temperature: 0 to 70°C (IP445) or -40 to 85°C (IP445E model). ■Current-limited solid-state relays Storage temperature: -40 to 125°C (all models). Relative humidity: 5 to 95% non-condensing. Benefits MTBF: 713,455 hrs at 25°C, MIL-HDBK-217F, Notice 2. ■Unique ground reference points for each port permits Power: AC and DC switching on one module. +5V (±5%) all outputs on: 400mA maximum. ±12V (±5%): 0mA (not used).■Pin are compatible with IP440 input module for loopback monitoring. Acromag, Inc.  PO Box 437, Wixom, MI 48393  Phone: 248-624-1541  Fax: 248-624-9234  solutions@acromag.com  www.acromag.com 27