Industry Pack Modules IP330 16-Bit A/D Analog Input IP330 Industry Pack (IP) modules provide fast, high resolution A/D conversion. The IP330 has many features to improve your overall Advanced memory management techniques allow the IP330 to operate with minimal interruption of the A/D converter. system throughput rate. You can scan all channels or define a subset for more frequent sampling. Burst mode Environmental Specifications scans selected channels at the maximum conversion Operating temperature: 0 to 70°C (IP330) rate. Uniform mode performs conversions at user- Analog Inputs or -40 to 85°C (IP330E model). Input configuration: 16 differential or 32 single-ended. defined intervals. Both modes can scan continuously, Storage temperature: -55 to 100°C. or execute a single cycle upon receiving a trigger. A/D resolution: 16 bits. Relative humidity: 5 to 95% non-condensing. Input ranges: ±5V, ±10V*, 0-5V, and 0-10V*. MTBF: 798,625 hrs at 25°C, MIL-HDBK-217F, Notice 2. “Mail box”memory allows the CPU to read the latest * Requires ±15V external supplies. data in 32 storage buffer registers without interrupting Power: Data sample memory: Individual channel mailbox with one or +5V: 40mA. the A/D converter. two storage buffer registers per channel. +12V from P1: 20mA. Maximum throughput rate: -12V from P1 or ±15V through P2: 15mA. Features Only one channel can be updated at a time. One channel: 125KHz maximum (8µS/conversion)■16-bit A/D converter (ADC) Ordering Information [66KHz (15µS/conversion) recommended] ■8µS conversion time (125KHz) 16 channels (differential): 4.2KHz (240µS/16 ch) Industry Pack Modules 32 channels (single-ended): 2.1KHz (480µS/32 ch). IP330 ■16 differential or 32 single-ended inputs Programmable gains: 1x, 2x, 4x, 8x. 32 single-ended or 16 differential inputs. (±5V, ±10V, 0-5V, and 0-10V input ranges) A/D triggers: External and software. IP330E ■Individual channel mailbox with one or two Same as IP330 plus extended temperature range System accuracy: 2 LSB (0.0030%) typical storage buffer registers per channel (SW calib., gain=1, 25°C). For Industry Pack Carrier Cards, see Page 5. Data format: Straight binary or two’s compliment. ■Programmable scan control Software (see Page 81) Input overvoltage protection: Vss -20V to Vdd 40V with IPSW-API-VXW ■Four scanning modes power on, -35V to 55V power off. ® VxWorks software support package Common mode rejection ratio (60Hz): 96dB typical. ■User-programmable interval timer IPSW-API-QNX Channel-to-channel rejection ratio (60Hz): 96dB typical. ® QNX software support package ■External trigger input and output IPSW-ATX-PCI IP Compliance (ANSI/VITA 4) ® ActiveX /OLE Controls 2.0 software package■Programmable gain for individual channels Meets IP specifications per ANSI/VITA 4-1995. IPSW-LINUX IP data transfer cycle types supported: Input/output (IOSel*), ■Post-conversion interrupts ™ Linux support (website download only) ID read (IDSel*), Interrupt select (INTSel*). For accessories information, see Page 87. Access times (8MHz clock): Benefits ID PROM read: 1 wait state (375ns cycle). ■“Mailbox”memory eliminates scanning Channel port/register read/write: 0 wait states. interruptions for optimum throughput. Interrupt select cycle read: 1 wait state. Mail box I/O read: 1 wait state. 6 wait states ■Data register indicates new and missed if ongoing internal mail box write. (overwritten) data values in the mail box. ■Programmable interrupts simplify data acquisition by providing greater control. Acromag, Inc.  PO Box 437, Wixom, MI 48393  Phone: 248-624-1541  Fax: 248-624-9234  solutions@acromag.com  www.acromag.com 20 Industry Pack Modules