Industry Pack Modules IP230-x 16-Bit D/A Analog Output IP230 modules have a 16-bit D/A converter (DAC) to provide highly-accurate analog voltage outputs. Jumper-selectable output ranges give you the choice of Independent D/A converters on each channel provide better performance and smoother operation. unipolar or bipolar voltage output. And for greater flexibility, the IP230 module accepts conversion start Environmental Specifications triggers from software commands, or from external Operating temperature: 0 to 70°C (IP230-4/8) sources for synchronization to specific events. Analog Outputs or -40 to 85°C (IP230-4E/8E models). Output configuration: 4 (IP230-4/4E) or 8 (-8/8E). Storage temperature: -55 to 125°C (all models). D/A Resolution: 16 bits. Features Relative humidity: 5 to 95% non-condensing Output ranges: ±5V, ±10V, 0 to 10V (jumper-selectable).■IP230-4: 4 analog voltage output channels Power: +5V (±5%): 200mA maximum. IP230-8: 8 analog voltage output channels Maximum throughput rate: ±12V (±5%) from P1: 150mA maximum. Outputs can be updated simultaneously or individually. MTBF: 815,720 hrs. at 25°C, MIL-HDBK-217F, notice 2. ■Individual 16-bit D/A converters per channel One channel: 100KHz (10µS/conversion) Four channels (IP235-4): 100KHz (10µS/4 ch) ■10µS settling time (100KHz throughput) Ordering Information Eight channels (IP235-8): 100KHz (10µS/8 ch). DAC programming: Immediate (transparently ■Three output ranges: ±5V, ±10V, 0 to 10V Industry Pack Modules programmed to DAC output); simultaneous (input (jumper-selectable) IP230-4 latches of multiple DACs are loaded with new data Four high-resolution voltage outputs before simultaneously updating outputs).■Two trigger modes IP230-4E (software or external trigger) System accuracy: 0.0061% of 20V span maximum Same as IP230-4 plus extended temp. range corrected error (i.e. calibrated) at 25°C with the IP230-8■External trigger output output unloaded. Eight high-resolution voltage outputs Output at reset: 0V for bipolar output, 5V for unipolar. ■Extended temperature option (-40 to 85°C) IP230-8E Output current: -5 to +5mA (maximum). Same as IP230-8 plus extended temp. range Short circuit protection: Indefinite at 25°C. Benefits For Industry Pack Carrier Cards, see Page 5. ■High channel density saves card cage slots. IP Compliance (ANSI/VITA 4) Software (see Page 81) Meets IP specifications per ANSI/VITA 4-1995. ■Internally stored calibration coefficients IPSW-API-VXW IP data transfer cycle types supported: ® ensure accuracy. VxWorks software support package Input/output (IOSel*), ID read (IDSel*). IPSW-API-QNX ■Flexible output control allows single cycle updating of Access Times (8MHz clock): ® QNX software support package individual channels or all channels simultaneously. All functions: 1 wait state (375nS cycle). IPSW-ATX-PCI ® ActiveX /OLE Controls 2.0 software package■Hardware jumpers allow output range selection on an individual channel basis. IPSW-LINUX ™ Linux support (website download only) For accessories information, see Page 87. Acromag, Inc.  PO Box 437, Wixom, MI 48393  Phone: 248-624-1541  Fax: 248-624-9234  solutions@acromag.com  www.acromag.com 16 Industry Pack Modules