A5B Series Accuracy■Ordering Input Modules A5B40: Information ±0.05% (0.08% max) Span ±10µV RTI ±0.05% (VZ)* A5B41: ±0.05% (0.08% max) Span ±0.2mV RTI ±0.05% (VZ)* Model Input Output Nonlinearity A5B40-01 ±0.02% Span (±0.035% Max) DC mV input -10 to 10mV -5 to 5V DC Stability A5B40-02 Input Offset A5B40: ±1µV/°C (±2µV/°C max) DC mV input -50 to 50mV -5 to 5V DC Input Offset A5B41: ±20µV/°C (±25µV/°C max) A5B40-03 Output Offset A5B40: ±20µV/°C (±30µV/°C max) DC mV input -100 to 100mV -5 to 5V DC Output Offset A5B41: ±20µV/°C (±30µV/°C max) A5B40-04 Gain A5B40: ±25ppm/°C (±50ppm/°C max) DC mV input -10 to 10mV 0 to 5V DC Gain A5B41: ±50ppm/°C (±70ppm/°C max) A5B40-05 Noise DC mV input -50 to 50mV 0 to 5V DC A5B40 Input, 0.1 to 10Hz: 0.4µVRMS (1µVRMS max) A5B40-06 A5B41 Input, 0.1 to 10Hz: 2µVRMS (4µVRMS max) DC mV input -100 to 100mV 0 to 5V DC A5B40/41 Units A5B40 Output, VIN = Full Scale: 20mVP-P max A5B41-01 A5B41 Output, VIN = Full Scale: 30mVP-P max DC voltage in -1 to 1V -5 to 5V DC Wide-bandwidth Output, VIN = 0V: 10mVP-P A5B41-02 Bandwidth, -3dB Millivolt and DC voltage in -5 to 5V -5 to 5V DC 10KHz A5B41-03 Voltage Input Rise Time, 10 to 90% span DC voltage in -10 to 10V -5 to 5V DC 35µS A5B40/41 modules plug into a backpanel to A5B41-04 Output Range DC voltage in -1 to 1V 0 to 5V DC provide a single channel of analog input which is ±5V or 0 to +5V isolated, amplified, and converted to a propor- A5B41-05 Output Resistance DC voltage in -5 to 5V 0 to 5V DC tional DC voltage output signal. 50 ohms A5B41-06 The input signal is processed through a Output Protection DC voltage in -10 to 10V 0 to 5V DC Continuous short to ground preamplifier on the field side of the isolation Output Selection Time, (to ±1mV of VOUT) barrier. This preamplifier has a gain-bandwidth ■Performance 2.5µS @ 200pF, 3.5µS @ 500pF, product of 5MHz and is bandwidth limited to 4.0µS @ 1000pF, 6.0µS @ 2000pF Input Range 10KHz. Isolation is provided by transformer A5B40: ±10mV to ±100mV Output Enable Control coupling, again using a proprietary technique to A5B41: ±1V to ±10V Max Logic "0": +0.8V suppress transmission of common mode spikes Min Logic "1": +2.4V Input Bias Current or surges. Max Logic "1": +36V A5B40: ±0.5nA Input Current, "0, 1": 0.5µA A5B41: ±0.05nA Power Supply Voltage Input Resistance +5V DC ±5% Normal A5B40: 200M ohms Normal A5B41: 650K ohms Power Supply Current 30mA (33mA max) Power Off A5B40: 40K ohms Power Off A5B41: 650K ohms Power Supply Sensitivity A5B40: ±2µV/% (RTI) Overload A5B40: 40K ohms A5B41: ±200µV/% (RTI) Overload A5B41: 650K ohms Environmental Input Protection Operating Temperature Range: -40 to +85°C Continuous: 240VRMS max Storage Temperature Range: -40 to +85°C Transient: ANSI/IEEE C37.90.1-1989 Relative Humidity: 0 to 95% noncondensing CMV, Input to Output RFI Susceptibility: ±0.5% span error @ 400MHz, 5W, Continuous: 1500VRMS max 3 ft Transient: ANSI/IEEE C37.90.1-1989 Approvals (CSA, FM) CMR (50 or 60Hz) Class I; Division 2; Groups A, B, C, D. A5B40: 100dB NOTES A5B41: 90dB * VZ is the input voltage that results in 0V output. NMR RTI is Referred To Input. -3dB at 10KHz, 120dB per decade above 10KHz Tel: 248-624-1541 Fax: 248-624-9234 e-mail: sales@acromag.com www.acromag.com 174 A5B Series A5B Series Rack-Mount I/O Modules ■ Cables ■ Mounting Accessories■Ordering AXCA004-xx AXRK-002 Information Interface cable for host system connection. 19-inch metal rack for mounting the backpanels, General-purpose 26 conductor ribbon cable for use power supplies, and universal interface board. Backpanels and with APB01/02 backpanels. Specify length, -xx, in feet UM-BEFE 35 Accessories when ordering. Base element with snap foot (for DIN rail mounting). AXCA005 UM-BE 35 ■ User's Manual Daisy-chain cable, interconnects up to four APB02 Base element without snap foot (for DIN rail mounting). 8500-299 backpanels. UM-SE A5B User’s Manual. Acromag provides (1) manual Side element (for DIN rail mounting). with first purchase order at NO CHARGE. Additional manuals must be purchased. The first manual must UM-VS AXCA005 APB02 Backpanel be specified on the purchase order to ensure delivery. Connection pin (for DIN rail mounting). AXCA005 APB02 Backpanel ■Backpanels ■ Miscellaneous Accessories APB01 AXCA005 APB02 Backpanel 16-channel, non-multiplexed backpanel. Non-address- AXFS-003 AXCA004 able analog I/O signal channels provide each module Fuses for backpanel, 4 amp, package of 10. APB02 Backpanel To host with its own analog bus. The module output switch is AXJP-003 system continuously "on" when using this backpanel. A tem- Jumper strap, package of 10 jumpers. Connects I/O perature sensor is mounted on each channel to pro- modules to direct the output of any input module to ■ Power Supplies vide cold junction compensation for thermocouple the adjacent output module on the APB01 backpanel. modules. Field connections are terminated with four AXPRT-003 The jumpers can also be used to configure I/O address- screw terminals at each module site. Power supply, 120V AC input (104 to 132V range). es on APB02 backpanel. APB02 AXPRE-003 AXR1 16-channel, multiplexed backpanel. Has two analog Power supply, 220V AC input (207 to 265V range). Current conversion resistor (precision 20 ohm 0.1%) buses; one for input, one for output. Two-bus config- for A5B32 current input module. Sockets are provided uration takes advantage of the switch-controlled out- ■ Interface Accessories on APB01/02. puts on the input modules and the track-and-hold AXEV inputs on the output modules. Up to four APBO2 Evaluation board (single channel) with a test socket. See backpanels can be daisy-chained. Includes tempera- table below for additional parts required. ture sensor and four screw terminals at each module The following parts are required for DIN rail mounting site. of one AXEV evaluation board: APB03 Quantity Part No. Description Single channel, non-multiplexed backpanel. See tables 2 UM-BEFE35 Base element with snap foot below for additional parts required. 2 UM-SE Side element APB04 4 UM-VS Connection pin Dual channel, non-multiplexed backpanel. See tables below for additional parts required. AXIF The following parts are required for DIN rail mounting Universal interface board. Converts a 26-pin ribbon AXIF interface board of one APB03 or APB04 backpanel: cable to 26 screw terminals for discrete wire. Mounts Quantity Part No. Description on AXRK-002 rack (standoffs, mounting hardware 1 UM-BEFE35 Base element with snap foot included). Use AXCA004 cable. 2 UM-SE Side element AVMEIF The following parts are required to DIN rail mount two VMEbus interface board, 32 inputs. Interfaces APB01 or more APB03 or APB04 backpanels: backpanel with a 26-pin ribbon cable to Acromag VME A/D boards. Quantity Part No. Description 2 UM-BEFE35 Base element with snap foot 2 UM-SE Side element Note 1 UM-BE35 Base element w/o snap foot Note 2 UM-VS Connection pin Note 1: Quantity = # of panels - 2 Note 2: Quantity = 4 x (# of panels - 2) Tel: 248-624-1541 Fax: 248-624-9234 e-mail: sales@acromag.com www.acromag.com 167 A5B Series Rack-Mount I/O Modules Dimensions Backpanels APB03 and APB04 Backpanel APB01, APB02 Rack Mount Kit AXRK-002 Tel: 248-624-1541 Fax: 248-624-9234 e-mail: sales@acromag.com www.acromag.com 177 A5B Series Dimensions Digital I/O Panel APB16H-SSR AXIF Outline Drawing Power Supplies AXPRT-003 (115V) and AXPRE-003 (230V) Dimensions are in inches (millimeters). Tel: 248-624-1541 Fax: 248-624-9234 e-mail: sales@acromag.com www.acromag.com 178 A5B Series