Hardware Accessories Hardware Accessories Termination Products Acromag provides a broad selection of hardware acces- sories to simplify the use of our I/O boards. This collection of panels, cables, and adapters facilitate field wiring and cable connections between boards within the card cage. Model # Description Page Termination Panels 5025-288 DIN rail-mount, 68 screw terminals, SCSI-3 cable connection . . . . . . . . . . . . . . . . . .89 5025-552 DIN rail-mount, 50 screw terminals, 50-pin header cable connection . . . . . . . . . . .89 Termination Panels Cables 5028-378 DIN rail-mount, 50 screw terminals, Termination panels provide screw terminals for easy Acromag also provides a large selection of signal cables SCSI-2 cable connection . . . . . . . . . . . . . . . . . .89 field signal wiring. A cable connector provides a clean to complete the connection of the field wiring on the 6985-16DI 19-inch wall-mount panel, 16 inputs, ribbon cable connection . . . . . . . . . . . . . . . . . .89 interface to the I/O board or mezzanine module. Many termination panel to the I/O board. We offer you a wide 6985-16DO 19-inch wall-mount panel, 16 outputs, termination panels have a compact footprint and assortment of ribbon cables to accommodate the vari- ribbon cable connection . . . . . . . . . . . . . . . . . .89 mount neatly on a DIN rail strip. Other panels are ous pin and connector configurations. Cables range 6985-32DI 19-inch wall-mount panel, 32 inputs, designed for mounting directly onto a standard 19-inch from simple 50-pin headers (shielded or unshielded) to ribbon cable connection . . . . . . . . . . . . . . . . . .89 computer rack. high-speed SCSI cables. Cable support is available for 6985-32DO 19-inch wall-mount panel, 32 outputs, all of Acromag’s analog I/O, digital I/O and serial ribbon cable connection . . . . . . . . . . . . . . . . . .89 All of Acromag’s I/O boards have a corresponding communication boards. Cables termination panel. This convenience saves you the time 5025-275 Flat cable, unshielded, and hassle of finding a compatible panel or crafting 50-pin female and P2 connectors . . . . . . . . . .89 Transition Modules your own. 5025-550 Flat cable, unshielded, These adapters provide a solution for controlling the 50-pin female connectors at both ends . . . . .89 location of your cabling within the card cage. Transition 5025-551 Flat cable, shielded modules repeat field I/O connections on Acromag’s 50-pin female connectors at both ends . . . . .89 VME,VME64, and cPCI carrier boards for front or rear 5028-187 Round cable, shielded, exit from the card cage. They can only be used with 50-pin female and SCSI-2 connectors . . . . . . .89 crates specifically designed for the use of 80mm transi- 5028-432 Round cable, shielded, tion modules. 68-pin SCSI-3 connectors . . . . . . . . . . . . . . . . .89 5028-438 Round cable, shielded, 50-pin SCSI-2 connectors . . . . . . . . . . . . . . . . .89 9944 Flat cable, for VME digital I/O, 64-pin female connectors at both ends . . . . .89 9948 Flat cable, for VME digital I/O, 64-pin female and P2 connectors . . . . . . . . . .89 Transition Modules TRANS-200 Transition module, 6U,VME64 . . . . . . . . . . . . .89 TRANS-C100 Transition module, 3U, cPCI . . . . . . . . . . . . . . . .89 TRANS-C200 Transition module, 6U, cPCI . . . . . . . . . . . . . . . .89 TRANS-GP Transition module, 6U,VME . . . . . . . . . . . . . . .89 Technical Illustrations Termination panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90 Signal cables 92 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Transition modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94 Acromag, Inc. • PO Box 437, Wixom, MI 48393  Phone: 248-624-1541  Fax: 248-624-9234  solutions@acromag.com  www.acromag.com 87 Hardware Accessories Industry Pack Accessories PCI Carrier Cards CompactPCI Carrier Cards VME Carrier Cards Models Description APC8620 APC8621 AcPC8625 AcPC8630 AcPC8635 AVME9630 AVME9660 AVME9670 AVME9675 Notes 5025-550 Ribbon Cable R R R R R 5025-551 Ribbon Cable R R R R R Shielded (for analog Industry Packs). 5028-438 SCSI-2 to R R R Shielded. SCSI-2 Cable TRANS-GP Transition A TRANS-200 Modules RR TRANS-C100 R TRANS-C200 R 5025-552 Termination R R R R R 5028-378 Panels R R R R Chart Legend R = Recommended for use with carrier. A = Available. PMC Accessories CompactPCI Accessories Cables Termination Panels Cables Termination Panels Models Description 5028-432 5028-438 5025-288 5028-378 Models Description 5028-432 5028-438 5025-288 5028-378 PMC220 PMC Modules   AcPC330 cPCI Boards   PMC230   AcPC341   PMC330   AcPC424   PMC341   AcPC464   PMC408   AcPC482   PMC424   AcPC483   PMC440   AcPC484   PMC464   AcPC730   PMC48x   PMC49x   VME Accessories PMC730   PMC-DXxxx   Termination Panels Cables PCI Accessories Digital I/O VME Boards AVME9420/25-i   Cables Termination Panels AVME9421/26-i   Models Description 5028-432 5028-438 5025-288 5028-378 AVME9422/27-i     APC330 PCI Boards   AVME9430-i   APC341   AVME9431-i   APC424   AVME9432-i     APC464   AVME9440-i    APC482   APC483   APC484   APC730   Acromag, Inc.  PO Box 437, Wixom, MI 48393  Phone: 248-624-1541  Fax: 248-624-9234  solutions@acromag.com  www.acromag.com 88 6985-16DI 6985-32DI 6985-16DO 6985-32DO 9944 9948 Hardware Accessories Hardware Accessories Hardware Accessories 9944-x Ordering Information Flat cable, for isolated digital I/O termination panels, 64-pin female connectors at both ends. Links VME board front Termination Panels connector to 6985 panel. For technical illustrations see Page 90. 9948-x 5025-288 Flat cable, for isolated digital I/O termination panels, 64-pin DIN rail-mount panel with 68 screw terminals for field I/O female connectors at both ends. Links VME board P2 con- connections and SCSI-3 connector for Acromag offers a variety of cables to complete your system. nector to 6985 panel. I/O board connections. 5025-552 Transition Modules DIN rail-mount panel with 50 screw terminals for field I/O For technical illustrations see Page 94. connections and 50-pin connector for TRANS-200 I/O board connections. 80mm VME64 transition module for AVME967x IP carriers. 5028-378 Brings 200 I/O points from backplane out four 50-pin SCSI- DIN rail-mount panel with 50 screw terminals for field I/O 2 connectors at rear of card cage. connections and SCSI-2 connector for TRANS-C100 I/O board connections. 80mm cPCI transition module for AcPC8635 carrier. Brings 6985-16DI 100 I/O points from backplane to two 50-pin SCSI-2 con- Isolated digital I/O panel, 16 input channels, The AVME9432 (shown) and AVME9422 connect to 6985-32Dx nectors at the rear of the card cage. 19-inch rack-mount. panels in front using 9944 cables and a 6985-16Dx panel out the TRANS-C200 rear P2 with a 9948 cable. 6985-16DO 80mm cPCI transition module for AcPC8625 carrier. Brings Isolated digital I/O panel, 16 output channels 200 I/O points from backplane to four 50-pin SCSI-2 con- 19-inch rack-mount. nectors at the rear of the card cage. 6985-32DI TRANS-GP Isolated digital I/O panel, 32 input channels 80mm VME transition module for use with Motorola 19-inch rack-mount. MVME162 or Acromag AVME9660. Enables I/O connec- 6985-32DO tions to a termination panel from front or rear of the card Isolated digital I/O panel, 32 output channels cage. Does not connect to backplane. 19-inch rack-mount. Cables (specify x = length in feet, 12 feet max.) Transition modules simplify I/O connections in the rear of a card For technical illustrations see Page 92. cage. From left: TRANS-200, TRANS-C200, TRANS-GP. 5025-550-x Flat cable, unshielded, 50-pin female connectors at both ends. Recommended for digital I/O applications. 5025-551-x Same as 5025-550 above except shielded. Recommended for best performance with analog I/O applications. The 5025-552 termination panel and 5025-550 signal cable make 5028-187 field I/O connections to the APC8620 carrier easy. Round cable, shielded, 6 ft. long, SCSI-2 connector at one end and 50-pin female connector at other end. 5028-432 AVME9670 with TRANS-200, 5028-438, and 5028-378. Round cable, shielded, 6 ft. long, SCSI-3 68-pin connector at both ends. 5028-438 Round cable, shielded, 6 ft. long, SCSI-2 50-pin connector at both ends. 5029-943 Flat cable, for serial communication modules, 5ft. long, 50- pin female connector at one end and four DE-9P Attach up to four 5025-552 panels and 5025-550 cables to bring connectors at other end. I/O connections out the front of an AVME9660 carrier. AcPC8625 with TRANS-C200, 5028-438, and 5028-378. Acromag, Inc.  PO Box 437, Wixom, MI 48393  Phone: 248-624-1541  Fax: 248-624-9234  solutions@acromag.com  www.acromag.com 89 Hardware Accessories Technical Illustrations 5025-288 Termination Panel PIN 68 TOP VIEW TB2 J1 1 2 PIN 1 3.40" (86.36) PLACE MODEL/SERIAL LABEL HERE. TB1 SIDE VIEW 7.1" (180.34) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 TERMINATION MARKINGS 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 2.7" (68.58) NOTE: DIMENSIONS ARE IN INCHES (MM) FRONT VIEW 5025-552 Termination Panel 5028-378 Termination Panel PIN 26 PIN 50 TERMINATION PANEL ACROMAG PIN 1 PIN 25 SCSI-2 CONNECTOR PART NUMBER (50 PINS) 4001-041 TERMINATION MARKINGS Acromag, Inc.  PO Box 437, Wixom, MI 48393  Phone: 248-624-1541  Fax: 248-624-9234  solutions@acromag.com  www.acromag.com 90 Hardware Accessories ModeL: Serial: 282-222 Hardware Accessories Hardware Accessories 6985-16DI and 6985-16DO Termination Panels 6985-32DI and 6985-32DO Termination Panels Acromag, Inc.  PO Box 437, Wixom, MI 48393  Phone: 248-624-1541  Fax: 248-624-9234  solutions@acromag.com  www.acromag.com 91 Hardware Accessories 5025-550/551 Cable 9944 Cable 9948 Cable 5028-187 Cable PLUG CONNECTOR TO TO I/O MODEL 5025-552 BOARDS I/O TERMINATION PANEL Acromag, Inc.  PO Box 437, Wixom, MI 48393  Phone: 248-624-1541  Fax: 248-624-9234  solutions@acromag.com  www.acromag.com 92 Hardware Accessories Hardware Accessories Hardware Accessories TOP VIEW 5028-432 Cable 2 METERS (78.72 INCHES, +4.0 / -0.0 INCHES) P2 P1 PIN 34 PIN 68 PIN 34 PIN 68 PIN 1 PIN 35 PIN 1 PIN 35 TOP VIEW 5028-438 Cable 2 METERS (78.72 INCHES, +4.0 / -0.0 INCHES) P1 P2 LATCH LATCH SPRING SPRING COPPER BRAID SHEILD, BEIGE PVC JACKET. COPPER, ALUMINIZED POLYESTER SHEILD PLUS UL TYPE CL2, 25 TWISTED PAIRS 28 AWG STRANDED PIN 25 PIN 25 PIN 50 PIN 50 (.050" [1.27 MM] PIN SPACING) D-SUB CONNECTOR MALE 50-PIN HIGH DENSITY MOLDED HOOD AND STRAIN RELIEF, BEIGE PIN 1 PIN 26 PIN 26 PIN 1 P1 P2 Acromag, Inc. • PO Box 437, Wixom, MI 48393  Phone: 248-624-1541  Fax: 248-624-9234  solutions@acromag.com  www.acromag.com 93 Hardware Accessories TRANS-200 Transition Module AVME967x TRANS-200 5028-438 Cable IP D IP C 5028-378 Termination Panel IP B IP A VME64x Backplane Acromag, Inc.  PO Box 437, Wixom, MI 48393  Phone: 248-624-1541  Fax: 248-624-9234  solutions@acromag.com  www.acromag.com 94 Hardware Accessories TB2 J1 TB1 Hardware Accessories Hardware Accessories TRANS-C200 Transition Module ACPC8625 TRANS-C200 5028-438 Cable 5028-378 Termination Panel Acromag, Inc.  PO Box 437, Wixom, MI 48393  Phone: 248-624-1541  Fax: 248-624-9234  solutions@acromag.com  www.acromag.com 95 cPCI Backplane TB2 J1 TB1 Hardware Accessories Model TRANS-C100 3.150 (80.0) SLOT A SLOT B J2 P1 3.937 TP1 (100.0) GND CompactPCI Backplane 5025-552 ACPC8635 TRANS-C100 Termination Panel SLOT A SLOT B 5025-550 or 5025-551 Cable J2 P1 TP1 GND Acromag, Inc.  PO Box 437, Wixom, MI 48393  Phone: 248-624-1541  Fax: 248-624-9234  solutions@acromag.com  www.acromag.com 96 Hardware Accessories D1 P3 P1 A1 A22 A B F1 F22 P2 P4 F1 F25 F1 F22 J1 J2 A1 A25 A1 A22 A1 A22 F1 F22 Hardware Accessories Hardware Accessories TRANS-GP Transition Module Front View of Card Cage Top View of Card Cage Top View of VME crate P1 Backplane To field I/O or P1 IP module Termination Panel TRANS-GP MVME TRANS- B A Cable 162 GP AB P1 Backplane B A CD A A B VME crate B VME card cage P1 Backplane AB TRANS-GP P1 MVME 162 IP module Drives A B AVME9660 Cable Acromag, Inc.  PO Box 437, Wixom, MI 48393  Phone: 248-624-1541  Fax: 248-624-9234  solutions@acromag.com  www.acromag.com 97 Hardware Accessories Technical Diagrams Models PMC330, PMC341, PMC424, PMC464, PMC48x, PMC49x, PMC730, PMC-DXxxx 0.075" (1.900mm) CMC BEZEL 0.108" (2.743mm) SEE NOTE 1 IN FRONT PANEL SEE NOTE 4 PMC MODULE CONNECTORS 0.800" (20.32mm) INTERBOARD SEPARATION COMPONENT SIDE OF PMC MODULE COMPONENT SIDE OF PMC CARRIER/CPU BOARD PLANES FLATHEAD SCREW FLATHEAD SCREW PMC CARRIER/CPU 0.532" (13.500mm) BOARD CONNECTORS SEE NOTES 2 AND 3 PMC MODULE P1 CONNECTOR IN FRONT PANEL 1. The usable space on the solder side of the PMC module is 0.075” (1.900mm) per PMC Mechanical Standard P1386.1. This PMC module is within limits. 2. The total height off the PMC carrier/CPU board is 0.532” (13.500mm) per P1 PMC Mechanical Standard P1386.1. This PMC module is within limits. 3. The maximum component height for VME and CompactPCI is 0.540” (13.720mm). This PMC module is within limits. Field 2.913 4. Distance to interboard separation plane is 0.108” (2.743mm). (74.00) I/O The desired spacing is 0.100” ((2.540mm) for VME and CompactPCI. J1 J2 Interface PMC logic interface connectors Dimensions are in inches Component side view (millimeters) 5.866 (149.00) Models PMC220, PMC230, PMC408, PMC440 0.138" (3.500mm) CMC BEZEL 0.045" (1.143mm) SEE NOTE 1 IN FRONT PANEL SEE NOTE 4 PMC MODULE CONNECTORS 0.800" (20.32mm) COMPONENT SIDE OF PMC MODULE INTERBOARD SEPARATION COMPONENT SIDE OF PMC CARRIER/CPU BOARD PLANES FLATHEAD SCREW FLATHEAD SCREW 0.595" (15.110mm) PMC CARRIER/CPU SEE NOTES 2 AND 3 BOARD CONNECTORS PMC MODULE P1 CONNECTOR IN FRONT PANEL 1. The usable space on the solder side of the PMC module is 0.075” (1.900mm) per PMC Mechanical Standard P1386.1. This PMC module exceeds this by 0.063” (1.600mm). P1 2. The total height off the PMC carrier/CPU board is 0.532” (13.500mm) per PMC Mechanical Embedded IndustryPack ANSI/VITA-4 Module Standard P1386.1. This PMC module exceeds this by 0.063” (1.600mm). (Model IP220, IP230, IP408, IP440, or IP470) 3. The maximum component height for VME and CompactPCI is 0.540” (13.720mm). This PMC module exceeds this by 0.055” (1.400mm).* 2.913 Field (74.00) I/O 4. Distance to interboard separation plane is 0.045” (1.143mm). J1 J2 Interface The desired spacing is 0.100” ((2.5400mm) for VME and CompactPCI. * Adequate clearance must be determined for the application. PMC logic interface connectors Dimensions are in inches Component side view (millimeters) 5.866 (149.00) Acromag, Inc.  PO Box 437, Wixom, MI 48393  Phone: 248-624-1541  Fax: 248-624-9234  solutions@acromag.com  www.acromag.com 98 Hardware Accessories