600T Series Single/Dual Channel Loop-Powered Transmitter Transmitters 658T PLC / DCS + + + IN 1 OUT 1 4-20mA R – – S 24V DC – + + Indicator IN 2 OUT 2 4-20mA R S – – 24V DC ■Description■Special Features These units accept universal RTD or resistance■Selectable RTD input types offer flexibility input signals and output proportional DC current to fit many applications. signals. The output can also be linearized to the ■DIP switch-configuration and self-ranging input sensor signal. Single-channel 657T and 650T Units technologies speed installation without pots, dual-channel 658T units are ideal for panel shops jumpers, or software. Multi-Channel, and end-users who require a high-density signal conditioner that can accommodate a broad■Toggle-switch calibration simplifies field Two-Wire range of temperature measurement applications. adjustments for faster and easier maintenance. Transmitters Configuration is fast and easy. First, you select■Configuration lockout safety feature prevents the input type with a simple DIP switch. Then, tampering and accidental changes. RTD / Resistance you set your zero/full-scale output values using a ■Reverse-acting output capability enables Input toggle switch on the front panel to increase or inverse proportional control signals. decrease the signal until you read the desired Models output value on your voltmeter. The toggles■Dual channel model saves space and reduces 657T: Single RTD input channel make it easy to calibrate a normal (proportional) equipment costs. 658T: Dual RTD input channels or reverse-acting (inverse) response in seconds. ■High-resolution Σ−Δ A/D converters deliver After completing the calibration, just press the Input Ranges superior accuracy for reliable measurements. mode/set toggle and your configuration settings RTD: 100 ohm Pt, 120 ohm Ni, 10 ohm Cu are safely saved to nonvolatile memory.■Lead break detection supports upscale or Resistance: 0 to 500 ohms downscale failsafe mode. Input Connections Output Range 4 to 20mA DC EXC+ EXC+ IN+ IN+ 2-Wire 4-Wire IN- IN- Power Requirement RTD RTD RTN RTN 12 to 50V DC (loop-powered) (Kelvin) OUT+ OUT+ OUT- OUT- Two-wire transmitter 4-20mA 4-20mA - + Approvals - + R Load R Load CE marked. UL, cUL listed Class I; Division 2; Groups A, B, C, D. EXC+ EXC+ IN+ IN+ 3-Wire Resistance IN- IN- RTD RTN RTN OUT+ OUT+ OUT- OUT- 4-20mA 4-20mA + - - + R R Load Load Tel: 248-624-1541 Fax: 248-624-9234 e-mail: sales@acromag.com www.acromag.com 102 600 Series 600 Series OUT- EXC+ OUT+ IN+ IN- RTN RTN IN- IN+ OUT+ EXC+ OUT- (118.9) 4.68 (95.3) 3.75 (59.4) 2.34 Isolated Transmitters ■Environmental■Physical■Performance Ambient Temperature Enclosure ■General Input Operating: -25 to 75°C (-13 to 167°F). Case: Self-extinguishing NYLON type 6.6 polyamide Analog to Digital Converter (ADC) Storage: -40 to 85°C (-40 to 185°F). thermoplastic UL94 V-2 NEMA Type 1 enclosure. 16-bit Σ−∆ A/D converter. Relative Humidity Connectors (Removable Terminal Blocks) Noise Rejection 5 to 95%, noncondensing. Wire Range: AWG #12-24. Normal Mode: Better than 40dB @ 60Hz. Power Requirement Printed Circuit Boards Common Mode: Better than 100dB @ 60Hz. 12 to 50V DC @ 25mA for each output channel. Military grade FR-4 epoxy glass circuit board. Input Overvoltage Protection Isolation Dimensions Bipolar Transient Voltage Suppressors (TVS). Not isolated. 1.05W x 4.68H x 4.35D inches. Input Impedance 26.7W x 118.9H x 110.5D millimeters. Radiated Field Immunity (RFI) 400K ohm at 10mV span; Complies with EN61000-4-3 Level 3 and EN50082-1. Shipping Weight input current, ±25nA, typical (±30nA, max.). 1 pound (0.45 Kg) packed. Electromagnetic Field Immunity (EMI) ■RTD Input Less than ±0.25% of output span effect. RTD Input Ranges■Ordering Electrical Fast Transient (EFT) 100Ω Pt, 120Ω Ni, or 10Ω Cu; user-configured. Information Complies with EN61000-4-4 Level 3 and EN50082-1. RTD °C Range (°F Range) Accuracy 1 Electrostatic Discharge (ESD) Pt -200 to 850°C (-328 to 1562°F) ±0.25°C Models 2 Complies with EN61000-4-2 Level 3 and EN50082-1. Pt -200 to 850°C (-328 to 1562°F) ±0.25°C 657T-0600 (add “-C” for factory calibration) Ni -80 to 320°C (-112 to 608°F) ±0.25°C Single channel RTD 2-wire transmitter Radiated Emissions Cu -200 to 260°C (-328 to 500°F) ±1.00°C 658T-0600 (add “-C” for factory calibration) Meets or exceeds EN50081-1 for Class B equipment. 1 2 Alpha: Pt (α = 1.3850), Pt (α = 1.3911), Dual channel RTD 2-wire transmitter Approvals Ni (α = 1.6720), Cu (α = 1.4272). CE marked. Accessories (see Page 108) 2, 3, or 4-wire configurations supported. Module pro- UL listed (UL508 and UL1604). PS5R-D24 vides sensor excitation, linearization, lead-wire com- cUL listed (C22.2, 142-M1987 and 213-M1987). Power supply (24V DC, 2.1A). pensation, and sensor break detection. Hazardous Loc.: Class I; Division 2; Groups A, B, C, D. See Power Supplies on page 183. RTD Excitation Current TBK-B01 0.5mA DC typical, all types. Optional terminal block kit, barrier strip style, 2 pcs. RTD Lead-Wire Compensation TBK-S01 25 ohms per lead. Optional terminal block kit, spring clamp style, 2 pcs. DIN RAIL 3.0 RTD Break Detection DIN RAIL 16.7 Configurable for either upscale or downscale. DIN rail strip, Type T, 3 inches (75mm) or 16.7 inches (425mm)■Resistance Input Optional terminal blocks: barrier strip (left) and 20RM-16-DIN Resistance Input Range spring clamp (right). Cage clamp terminal is standard. 19" rack-mount kit with DIN rail. 0 to 500 ohms. Holds sixteen 650T transmitters. Resistance Accuracy ±0.05 ohms. TB3 CH2 Dip Switches ■Output Output Range 36 35 34 33 32 31 "T" RAIL DIN MOUNTING DIN EN 50022, 35mm FS Range: 4 to 20mA DC, 3.8 to 22mA range typical. DN UP Z OUT INPUT Output Compliance CHAN 2 658T-0600 RLOAD = (VSUPPLY - 12V) / 0.02A C L FS Output Response Control DN UP 657T-0600 Proportional/inverse selectable. Z 658T-0600 INPUT OUT CHAN 1 Ambient Temperature Effect Acromag Better than ±0.006% of input span per °C or R 21 22 23 24 25 26 ±100ppm/°C, whichever is greater. Output Response Time (for input step change) CH1 Dip Switches 700mS typical to 98% of final output value. TB2 1.05 (26.7) 3.90 (99.1) 4.35 NOTE: ALL DIMENSION ARE IN INCHES (MILLIMETERS) (110.5) Tel: 248-624-1541 Fax: 248-624-9234 e-mail: sales@acromag.com www.acromag.com 103 600T Series Accessories Terminal Blocks Mounting Hardware Power Supplies Barrier strip (left) and spring clamp (right). ■Ordering Information See individual I/O modules for compatibility. Barrier Strip Terminal Blocks DIN-Rail Mounting 50W Supply Wire range: For your convenience, Acromag offers several Input Power Requirement AWG #12-26 85 to 264V AC or 105 to 370V DC mounting accessories to simplify your system installation. Our 19” rack-mount kit provides a Output clean solution for mounting your I/O modules 24V DC, 2.1A (50W) and a power supply. Or you can buy precut DIN ■Ordering Information rail strips for mounting on any flat surface. PS5R-D24 6-position: L = 1.47 inches (37.7 mm) Universal 50W power supply ■Ordering Information Wire range: 20RM-16-DIN AWG #12-26 See Power Supplies on page 183 for other models 19" rack-mount kit with DIN rail. and more information. DIN RAIL 3.0 DIN RAIL 16.7 DIN rail strip, Type T, 3 inches (75mm) or AC Current Sensor 16.7 inches (425mm) 3-position: L = 0.87 inches (22.3 mm) TBK-B01 TBK-B03 Terminal block kit, Terminal block kit, two 6-position pieces one 3-position and three 6-position pieces TBK-B02 Terminal block kit, four 6-position pieces■Ordering Information 5020-350 Spring Clamp Terminal Blocks AC current sensor Wire range: AWG #12-26 3-position: L = 0.66 inches (16.9 mm) 6-position: L = 1.26 inches (32.3 mm) TBK-S01 TBK-S03 Terminal block kit, Terminal block kit, two 6-position pieces one 3-position and three 6-position pieces TBK-S02 Terminal block kit, four 6-position pieces Tel: 248-624-1541 Fax: 248-624-9234 e-mail: sales@acromag.com www.acromag.com 108 600 Series