600T Series Single/Dual-Channel DC-Powered Transmitter Isolated Transmitters 612T PLC / DCS + V+/I+ Input V+/I+ OUT 1 RLOAD RTN IN 1 – RTN + V+/I+ Input OUT 2 RLOAD RTN – V+/I+ 3-way optical IN 2 DC+ isolation PWR RTN DC – ■Description■Special Features These units receive DC current or voltage input■Universal DC input and output ranges offer signals, provide isolation, and output proportion- flexibility to fit many applications. al DC current or voltage signals. With support for ■Auto-configuration and self-ranging technolo- universal DC I/O ranges, 610T series transmitters 610T Units gies speed installation without pots, switches, provide a solution for a wide variety of isolation jumpers, or software. Multi-Channel, and signal conversion tasks. The single-channel 611T and dual-channel 612T are ideal for panel■Optical isolation eliminates ground loops, Universal DC I/O shops and end-users who require a high-density reduces noise, and blocks transient signals. signal conditioner that can accommodate a Models ■Push-button calibration simplifies field broad range of instrumentation applications. 611T: Single I/O channel adjustments for faster and easier maintenance. 612T: Dual I/O channels Installation is fast and simple with Acromag’s ■Configuration lockout safety feature prevents built-in auto-configuration feature. Using your tampering and accidental changes. Input Ranges standard calibrator, the 610T’s internal microcon- Universal input with automatic configuration troller automatically senses the input source type■Reverse-acting output capability enables ±100mA (self-ranging), (voltage or current) and selects the optimum per- inverse proportional control signals. ±100V DC (self-ranging), formance range for your zero and full-scale input ■Each input channel can drive two outputs 0 to 20 amps AC (with optional sensor) values. To adjust your output values, simply push (a voltage and a current output signal). the up or down buttons on the front panel until Output Ranges you read the desired output signal on your■Dual channel model saves space and reduces Universal output (user-configured ranges) meter. The up/down buttons help you calibrate equipment costs. 0 to 20mA (full range capability), for normal (proportional) or reverse-acting 0 to 10V DC (full range capability)■High-resolution Σ−Δ A/D converters deliver (inverse) response in seconds. After you select superior accuracy for reliable measurements. the desired calibration, just press the set button Power Requirement and your configuration settings are safely saved 10 to 36V DC AC Current Sensor to nonvolatile memory. Approvals Both models provide high-voltage isolation CE marked. UL, cUL listed. between the input, output and power (3-way). On dual channel units, each channel operates independently, with inputs isolated from each other, to prevent interaction between channels. For easy troubleshooting, each channel has diag- nostic LEDs to identify input over/under range conditions. An additional status LED indicates the unit is operating properly or that the front panel pushbutton lockout feature has been invoked. Optional terminal blocks: barrier strip (left) and spring clamp (right). Cage clamp terminal is standard. Tel: 248-624-1541 Fax: 248-624-9234 e-mail: sales@acromag.com www.acromag.com 94 600 Series RTN V+ I+ RTN V+ I+ 600 Series DC+ RTN DC- I+ JMP JMP V+ TB2 TB3 RTN I+ JMP JMP V+ TB1 TB4 (118.9) 4.68 (95.3) 3.75 (59.4) 2.34 Isolated Transmitters Ambient Temperature Effect■Physical■Performance Better than ±0.018% of output span per °C or ±1µV, Enclosure whichever is greater.■General Input Case: Self-extinguishing NYLON type 6.6 polyamide thermoplastic UL94 V-2 NEMA Type 1 enclosure. Analog to Digital Converter (ADC) Output Response Time (for input step change) 16-bit Σ−Δ A/D converter. 800mS typical to 98% of final output value. Connectors (Removable Terminal Blocks) Wire Range: AWG #12-24. Noise Rejection ■Environmental Normal Mode: Better than 40dB @ 60Hz. Printed Circuit Boards Ambient Temperature Common Mode: Better than 100dB @ 60Hz. Military grade FR-4 epoxy glass circuit board. Operating: -25 to 70°C (-13 to 158°F). Input Overvoltage Protection Storage: -40 to 85°C (-40 to 185°F). Dimensions Bipolar Transient Voltage Suppressors (TVS). 1.05W x 4.68H x 4.35D inches. Relative Humidity 26.7W x 118.9H x 110.5D millimeters. 5 to 95%, noncondensing.■DC Current Input Shipping Weight DC Current Input Range Power Requirements 1 pound (0.45 Kg) packed. ±100mA DC with full range capability. 611T: 10 to 36V DC. 24V DC @ 55mA. Minimum recommended span is ±4mA. 612T: 10 to 36V DC. 24V DC @ 75mA. ■Ordering DC Current Input Impedance Isolation 10 ohms. Information 3-way (input/output/power). 1500V AC for 60 seconds or 250V AC continuous. Dual channel model includes DC Current Input Accuracy Models input-to-input isolation and outputs share a common. Better than ±0.1% of output span. 611T-0500 Radiated Field Immunity (RFI) Single channel isolated transmitter ■DC Voltage Input Complies with EN61000-4-3 Level 3 and EN50082-1. 612T-0500 DC Voltage Input Range Dual channel isolated transmitter Electromagnetic Field Immunity (EMI) ±100V DC with full range capability. Less than ±0.25% of output span effect. Minimum recommended span is 1.0V. Accessories (see Page 108) Electrical Fast Transient (EFT) 5020-350 Input impedance Complies with EN61000-4-4 Level 3 and EN50082-1. AC current sensor. See Page 189 for details. Greater than 500K ohms. PS5R-D24 Surge Withstanding Capability (SWC) DC Voltage Input Accuracy Power supply (24V DC, 2.1A). Complies with EN61000-4-5 Level 3 and EN50082-1. Better than ±0.1% of output span. See Power Supplies on page 183. Electrostatic Discharge (ESD) TBK-B02■AC Current Input Complies with EN61000-4-2 Level 3 and EN50082-1. Optional terminal block kit, barrier strip style, 4 pcs. AC Current Input Range (optional) Radiated Emissions TBK-S02 An optional external AC current sensor is required to Meets or exceeds EN50081-1 for Class B equipment. Optional terminal block kit, spring clamp style, 4 pcs. monitor AC current signals (Model 5020-350). DIN RAIL 3.0 or DIN RAIL 16.7 AC Current Range Primary Turns Approvals DIN rail strip, Type T, 3 in.(75mm) or 16.7 in. (425mm) 0 to 20A AC 1 CE marked, UL, cUL listed (USA, Canada). 0 to 10A AC 2 UL3121 general product safety. 20RM-16-DIN 0 to 5A AC 4 19" rack-mount kit with DIN rail. 0 to 2A AC 10 Holds sixteen 610T series transmitters. 0 to 1A AC 20 1.05 (26.7) AC Current Input Accuracy TB4 TB4 TB3 Better than ±0.5% of output span. ■Output (DC V/mA) RUN 46 45 44 43 42 41 36 35 34 33 32 31 "T" RAIL DIN MOUNTING ST DIN EN 50022, 35mm Current Output CH 1 2 Range: 0 to 20mA maximum (user-configured range). OUTPUT 2 OUTPUT 1 Power 612T-0500 MODE Compliance: 11V DC typical. only C Load resistance range: 0 to 550 ohms. L Voltage Output 612T-0500 only SET Ranges: 0 to 10V maximum (user-configured range). INPUT 1 INPUT 2 Compliance: 10mA max. with short circuit protection. Output impedance: 1 ohms. R 11 12 13 14 15 16 21 22 23 24 25 26 Accuracy (overall input to output) Better than ±0.1% of span for nominal output ranges TB1 TB1 TB2 of 0 to 10V or 0 to 20mA. 3.90 1.05 (99.1) (26.7) 4.35 (110.5) NOTE: ALL DIMENSION ARE IN INCHES (MILLIMETERS) Tel: 248-624-1541 Fax: 248-624-9234 e-mail: sales@acromag.com www.acromag.com 95 600T Series Accessories Terminal Blocks Mounting Hardware Power Supplies Barrier strip (left) and spring clamp (right). ■Ordering Information See individual I/O modules for compatibility. Barrier Strip Terminal Blocks DIN-Rail Mounting 50W Supply Wire range: For your convenience, Acromag offers several Input Power Requirement AWG #12-26 85 to 264V AC or 105 to 370V DC mounting accessories to simplify your system installation. Our 19” rack-mount kit provides a Output clean solution for mounting your I/O modules 24V DC, 2.1A (50W) and a power supply. Or you can buy precut DIN ■Ordering Information rail strips for mounting on any flat surface. PS5R-D24 6-position: L = 1.47 inches (37.7 mm) Universal 50W power supply ■Ordering Information Wire range: 20RM-16-DIN AWG #12-26 See Power Supplies on page 183 for other models 19" rack-mount kit with DIN rail. and more information. DIN RAIL 3.0 DIN RAIL 16.7 DIN rail strip, Type T, 3 inches (75mm) or AC Current Sensor 16.7 inches (425mm) 3-position: L = 0.87 inches (22.3 mm) TBK-B01 TBK-B03 Terminal block kit, Terminal block kit, two 6-position pieces one 3-position and three 6-position pieces TBK-B02 Terminal block kit, four 6-position pieces■Ordering Information 5020-350 Spring Clamp Terminal Blocks AC current sensor Wire range: AWG #12-26 3-position: L = 0.66 inches (16.9 mm) 6-position: L = 1.26 inches (32.3 mm) TBK-S01 TBK-S03 Terminal block kit, Terminal block kit, two 6-position pieces one 3-position and three 6-position pieces TBK-S02 Terminal block kit, four 6-position pieces Tel: 248-624-1541 Fax: 248-624-9234 e-mail: sales@acromag.com www.acromag.com 108 600 Series