Manufacturers
ACROMAG 350T-V2-Y-DIN-NCR
Description
Transmitter, DC-powered: 0 to 10V DC input range; 4 to 20mA output range; 10 to 36V DC power; DIN rail mount
Part Number
350T-V2-Y-DIN-NCR
Price
Request Quote
Manufacturer
ACROMAG
Lead Time
Request Quote
Category
PROCESS INSTRUMENT
Datasheet
Extracted Text
Flat Pack Series 250T Loop-Powered (2-wire) Transmitter Isolated Transmitters PLC / DCS P + 250T S Sense Resistor + – IN OUT + 24V DC 4-20mA RLOAD Input L – Isolation 350T DC-Powered (3-wire) Transmitter PLC / DCS P + 350T P PWR + – IN + 24V DC OUT V/mA RLOAD Input – L – Isolation 450T AC-Powered (4-wire) Transmitter DC Voltage and PLC / DCS + 450T S Sense Resistor DC Current Input + OUT + – – IN V/mA These models convert sensor inputs to propor- L1 3-Way PWR RLOAD W – tional process current or voltage output signals. L Isolation G Models 250T: Loop-powered transmitter series ■Special Features■Performance 350T: DC-powered transmitter series Ambient Temperature Range■Excellent accuracy and stability ensure reliable 450T: AC-powered transmitter series Operating: -13 to 185°F (-25 to 85°C). measurements in harsh industrial environments. Storage: -40 to 185°F (-40 to 85°C). Input Ranges■RFI and EMI resistance minimize the effects of Accuracy ■DC voltage, ±0.1% of calibrated span or ±0.25 mV, whichever is environmental noise. greater. Includes repeatability, hysteresis, terminal ±100mV to ±100.0V DC ■90% span adjustment enables precise point linearity, and adjustment resolution. ■DC current, application calibration. Ambient Temperature Effect 0 to 20mA (10 ohm input load) Less than ±0.01% of output span per °F (±0.018% per ■Compact, 1-inch wide housing uses less space °C). (Specification includes the combined effects of zero for easier installation in control panels. and span over temperature). Output Ranges ■DC current: 4 to 20mA Noise Resistance ■Low power consumption. 350T units operate RFI: Less than ±0.5% ,of output span effect. on currents as low as 9mA to help prevent ■DC voltage: 0 to 5V or 0 to 10V EMI: Less than ±0.25% of output span effect. expensive upgrades to larger power supplies. Noise Rejection Power Requirements Common Mode: 120dB at 60Hz, 100 ohm unbalance.■1500V AC peak isolation (250V AC or 354V ■250T: 12 to 50V DC @ 20mA (loop-powered) Normal Mode: 30dB at 60Hz, 100 ohm source. DC continuous) prevents ground loops. Response Time ■350T: DC voltage source (see table below) 250T models: Output reaches 98% of output span in 300mS. Input isolated from output/power. Output range Power Bandwidth -3dB at 3 Hz, typical. 4 to 20mA 10 to 36V DC @ 30mA 350T models: 0 to 5V 10 to 36V DC @ 9mA Output Compliance Input isolated from output and power. 250T: RLOAD (max.) = (VSUPPLY - 12V) / 20mA. 0 to 10V 12.5 to 36V DC @ 9mA Output and power share a common. 350T: RLOAD (max.) = (VSUPPLY - 2.5V) / 20mA. ■450T: 115V or 230V AC, ±10%, 50 to 60Hz 450T: RLOAD = 600 ohms. 450T models: 3-way isolation. Input, output, and power Output range Power circuits are isolated from each other. 4 to 20mA 115V AC @ 0.050A 4 to 20mA 230V AC @ 0.025A 0 to 5V, 0 to 10V 115V AC @ 0.020A 0 to 5V, 0 to 10V 230V AC @ 0.010A Tel: 248-624-1541 Fax: 248-624-9234 e-mail: sales@acromag.com www.acromag.com 114 Flat Pack Flat Pack Isolated Transmitters Ordering Notes■Ordering Information * Unit requires factory calibration. Append “-C” to Select one option from each column. Example: 450T-V4-V0-2-DIN-NCR-C end of model number. Specify ranges on order. To order factory calibration, append “-C” to end of model number. Specify ranges on order. † Units are shipped separately from any optional enclosures (i.e. units are not installed in any external Base Input Mounting Approval housing). 250T -C1 -V4 -DIN -N4 -NCR †† Units shipped installed in external enclosure. -V1 -V5 -ST -N12 -OL1 Note: Accessories -V2 -V6 -SM -XP -DT1 All 250Ts have 4 to 20mA output Power supplies -V3 -EP1 and are loop-powered. See Power Supplies on page 183. DIN RAIL 3.0 Base Input Output Mounting Approval DIN RAIL 16.7 350T -C1 -V4 -Y -DIN -NCR DIN rail strip, Type T, 3 inches (75mm) or Note: 16.7 inches (425mm) -V1 -V5 -V0 All 350Ts accept 20RM-16-DIN -V2 -V6 -V5 10 to 36V DC 19" rack-mount kit with DIN rail. Holds sixteen -V3 power supply. 250T/350Ts or ten 450T transmitters. 350T-N4-WM Base Input Output Power Mounting Approval NEMA 4 water-tight enclosure, wall-mount. Holds two 350Ts or one 450T transmitter. 450T -C1 -V4 -Y -1 -DIN -NCR 350T-N12-WM -V1 -V5 -V0 -2 NEMA 12 oil-tight enclosure, wall-mount. -V2 -V6 -V5 Holds two 350Ts or one 450T transmitter. -V3 Input Options Output Options (350T, 450T only) -C1: Current range 0 to 20mA -Y: 4 to 20mA DC. Span adjust: 4.0 to 20.0mA DC -V0: 0 to 10V DC into 10K ohms or greater Zero adjust: 0.0 to 16.0mA DC -V5: 0 to 5V DC into 5K ohms or greater Input impedance: 10 ohms. -V1: Voltage range 0 to 1V DC Power Options (450T only) Span adjust: 0.1 to 1.0V DC -1: 115V AC power Zero adjust: 0 to 25% of input span -2: 230V AC power Input impedance: 40M ohms at 0.4V span. -V2: Voltage range 0 to 10V DC Mounting Options Span adjust: 1.0 to 10.0V DC Mountings Zero adjust: 0 to 25% of input span -DIN: DIN rail G or T mount Input impedance: 100K ohms. -ST: SNAPTRACK mount [250T only] -V3: Voltage range 0 to 100V DC Span adjust: 10.0 to 100.0V DC -SM: Surface-mount [250T only] Zero adjust: 0 to 25% of input span External housings Input impedance: 500K ohms. -N4: NEMA 4, water-tight [250T only], holds two -V4: Voltage range ±1V DC -N12: NEMA 12, oil-tight [250T only], holds two Span adjust: ±0.1 to ±1.0V DC -XP: Explosion-proof NEMA 4 [250T only], holds one Zero adjust: symmetrical around 0V Input impedance: 80M ohms at 0.8V span. Approval Options -V5: Voltage range ±10V DC -NCR: No certification/approval required. Span adjust: ±1.0 to ±10.0V DC † -OL1 : CSA approval, Ordinary Locations [250T only]. Zero adjust: symmetrical around 0V † Input impedance: 100K ohms. -DT1 : CSA approval, Div. 2 hazardous locations: Class I; Div. 2; Groups A, B, C, D [250T only]. -V6: Voltage range ±100V DC †† Span adjust: ±10.0 to ±100.0V DC -EP1 : CSA approval, Explosion-proof for hazardous Zero adjust: symmetrical around 0V locations: Class I; Groups B, C, D Class II; Groups E, Input impedance: 500K ohms. F, G. NOTE: Only available with explosion-proof housing (-XP) [250T only]. Tel: 248-624-1541 Fax: 248-624-9234 e-mail: sales@acromag.com www.acromag.com 115 Flat Pack Series Dimensions Transmitters: 250T, 350T Isolators: 270i, 340i, Limit Alarms: 260A Power Supplies: 25PS, 35PS-2U Surface Mount: Snaptrack 250T-SM, Mount: 260A-SM, 250T-ST, 270i-SM, 260A-ST, 25PS-SM 270i-ST, 25PS-ST Dimensions are in inches (millimeters). Tel: 248-624-1541 Fax: 248-624-9234 e-mail: sales@acromag.com www.acromag.com 138 Flat Pack Flat Pack Signal Conditioners Dimensions Explosion-Proof and Industrial Housing 250T-XP, 260A-IH/IHW, 270i-XP 250T Transmitter shown installed in enclosure with cover removed. 250T Transmitter shown removed from enclosure. NEMA-4 and NEMA-12 Enclosures 250T-N4 / N12, 25PS-N4 / N12 260A-N4 / N12, 270i-N4 / N12 Dimensions are in inches (millimeters). Tel: 248-624-1541 Fax: 248-624-9234 e-mail: sales@acromag.com www.acromag.com 139 Flat Pack Series Dimensions Transmitters: 450T Isolators: 330i, 430i, Limit Alarms: 361A, 461A Power Supplies: 35PS-8U NEMA-4 and NEMA-12 Enclosures 350T-N4-WM 350T-N12-WM Dimensions are in inches (millimeters). Tel: 248-624-1541 Fax: 248-624-9234 e-mail: sales@acromag.com www.acromag.com 140 Flat Pack Flat Pack Signal Conditioners Dimensions 20RM-16-DIN Rack Mount Kit AC Sensor 5020-350 Dimensions are in inches (millimeters). Tel: 248-624-1541 Fax: 248-624-9234 e-mail: sales@acromag.com www.acromag.com 141
Frequently asked questions
What makes Elite.Parts unique?
What kind of warranty will the 350T-V2-Y-DIN-NCR have?
Which carriers does Elite.Parts work with?
Will Elite.Parts sell to me even though I live outside the USA?
I have a preferred payment method. Will Elite.Parts accept it?
What they say about us
FANTASTIC RESOURCE
One of our top priorities is maintaining our business with precision, and we are constantly looking for affiliates that can help us achieve our goal. With the aid of GID Industrial, our obsolete product management has never been more efficient. They have been a great resource to our company, and have quickly become a go-to supplier on our list!
Bucher Emhart Glass
EXCELLENT SERVICE
With our strict fundamentals and high expectations, we were surprised when we came across GID Industrial and their competitive pricing. When we approached them with our issue, they were incredibly confident in being able to provide us with a seamless solution at the best price for us. GID Industrial quickly understood our needs and provided us with excellent service, as well as fully tested product to ensure what we received would be the right fit for our company.
Fuji
HARD TO FIND A BETTER PROVIDER
Our company provides services to aid in the manufacture of technological products, such as semiconductors and flat panel displays, and often searching for distributors of obsolete product we require can waste time and money. Finding GID Industrial proved to be a great asset to our company, with cost effective solutions and superior knowledge on all of their materials, it’d be hard to find a better provider of obsolete or hard to find products.
Applied Materials
CONSISTENTLY DELIVERS QUALITY SOLUTIONS
Over the years, the equipment used in our company becomes discontinued, but they’re still of great use to us and our customers. Once these products are no longer available through the manufacturer, finding a reliable, quick supplier is a necessity, and luckily for us, GID Industrial has provided the most trustworthy, quality solutions to our obsolete component needs.
Nidec Vamco
TERRIFIC RESOURCE
This company has been a terrific help to us (I work for Trican Well Service) in sourcing the Micron Ram Memory we needed for our Siemens computers. Great service! And great pricing! I know when the product is shipping and when it will arrive, all the way through the ordering process.
Trican Well Service
GO TO SOURCE
When I can't find an obsolete part, I first call GID and they'll come up with my parts every time. Great customer service and follow up as well. Scott emails me from time to time to touch base and see if we're having trouble finding something.....which is often with our 25 yr old equipment.
ConAgra Foods