�������������� ® Undermount Shelf Slide APPLICATIONS: Pull-out storage shelves, kitchen Non-Disconnect pull-out pantries, and entertainment centers. Over Travel 130 lb. [59 kg.] Capacity 1.75 [44.5] REF. C 1.00 B [25.4] A .22 [5.6] .171 X .234 [4.3 X 5.9] (4X) .22 .171 X .234 [5.6] [4.3 X 5.9] A (4X) 1.00 B [25.4] C 2.25 [57.2] .06 REF. Slide Length [1.5] .75 TYP. Cabinet Member [19.1] 1.54 [39.1] Moving Member .75 Hold-In Detent [19.1] TYP. INCHES [mm] Finish Bright electro-zinc (C) or black zinc* Part Slide Slide A B C (CB) plating Number Length Travel 12.00 12.83 4.00 6.00 10.00 Length 12" to 28" [305mm to 711mm] 301-2590-12 [305] [325.9] [101.6] [152.4] [254.0] Height 1.54" [39.1mm] 14.00 14.83 4.00 8.00 12.00 301-2590-14 [356] [376.7] [101.6] [203.2] [304.8] Side Space .75" [19.1mm] slide only 16.00 16.83 4.00 10.00 14.00 2.25" [57.2mm] with brackets 301-2590-16 [406] [427.5] [101.6] [254.0] [355.6] Load 130 lbs. [59 kg.] per pair** 18.00 18.83 4.00 12.00 16.00 301-2590-18 [457] [478.3] [101.6] [304.8] [406.4] Travel Slide length plus .83" [21.1mm] 20.00 20.83 7.00 11.00 18.00 301-2590-20 [508] [529.1] [177.8] [279.4] [457.2] Mounting Bracket/undermount 22.00 22.83 7.00 13.00 20.00 301-2590-22 Hardware #8 pan head or round head screws [559] [579.9] [177.8] [330.2] [508.0] 24.00 24.83 7.00 15.00 22.00 Features Hold-in detent, silenced open and 301-2590-24 [610] [630.7] [177.8] [381.0] [558.8] closed, slide is handed 26.00 26.83 7.00 17.00 24.00 301-2590-26 [660] [681.5] [177.8] [431.8] [609.6] * Minimum order quantities may apply. 28.00 28.83 7.00 19.00 26.00 ** Load rating based on an 18" slide on 301-2590-28 a 16" wide shelf cycled 50,000 times. [711] [732.3] [177.8] [482.6] [660.4] ������������������������� 1. Mark a line at least 1/4" [6.4mm] in from the right side of the cabinet opening and parallel to the cabinet side. 2. Locate a point on this line 1.00" [25.4mm] back from the desired front of the slide. 3. Using #8 pan or round head screws, mount the cabinet member bracket through the first hole at this point. NOTE: For maximum strength, ensure that the hold-in detent spring is installed inside the cabinet. 4. Mount the left hand slide similarly, locating the screw centerline of the cabinet member bracket at least 1/4" [6.4mm] in from the left side of the opening. 5. Keeping the right and left hand slides parallel, install the remainder of the cabinet member screws. NOTE: When using soft materials such as particle board, replace rear cabinet mounting screws with through bolts. 6. With slides extended, center the shelf and drive the screws up through the moving member brackets into the bottom of the shelf. NOTE: If the unit is mounted too close to the floor, reverse the procedure above and install the moving member screws first. ��������������������������� Complete your slide order for Accuride model 301-2590 by specifying the following: 20 Pair C 301-2590 -16 D Total Required Slides Slide Finish Slide Model Number Slide Length Optional Polybag Packaging ��������� Distributor (D) Pack: All lengths are packaged 5 pair per box. Polybag includes one pair of slides and mounting screws. Bulk (P) Pack: Slides only. Left hand slides and right hand slides are packaged in separate boxes. Lengths 12" - 18" 20 each per box Lengths 20" - 28" 10 each per box ����� �������� ACCURIDE INTERNATIONAL INC. 12311 Shoemaker Avenue Slide members and ball retainers: Cold rolled steel Santa Fe Springs, CA 90670 Ball bearings: Carburized steel TEL (562) 903-0200 FAX (562) 903-0208 www.accuride.com Note: Specifications, materials, prices, terms, and delivery Manufacturing, Engineering, and Sales are subject to change without notice. United States • Germany  Japan  Mexico  United Kingdom Copyright © 2002 Accuride International Inc. Printed in U.S.A. 3700-9299(9298)-MK519-R6-1102 Copyright © 2002 Accuride International Inc. Printed in U.S.A. 3700-9298(9299)-MK020-R6-1102